<![CDATA[BQ Aquaris M10 HD won't turn on [solved]]]>Hi,
I flashed my new M10 HD Android via UBPorts-Installer with UT 15.04. Installation & Reboot ran well (resize /cache & /system partition was neccesary). Afterwords I played with UT for about 2h. Battery power 60%. Then I decided to power down the device to insert a sd-card. I tried to turn on the device again, but nothing happend. I pushed the power button several minutes, no reaction. I also tried serveral combinations with power button and volume +/- . The screen stays black, no vibration, absolutly nothing. Also no reaction when I connect the device via usb to my desktop pc. Adb says β€œno device found”.

Now i ran out of ideas. Can anyone help me?

]]>https://forums.ubports.com/topic/1021/bq-aquaris-m10-hd-won-t-turn-on-solvedRSS for NodeWed, 22 Apr 2026 03:04:20 GMTMon, 05 Mar 2018 10:17:24 GMT60<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Sat, 10 Mar 2018 08:28:07 GMT]]>@bruno said in BQ Aquaris M10 HD won't turn on [solved]:

h am android package cause BQ don't provide an ubuntu package for the HD edition anymore. Afterwards i could reflash the device back to UT by using the UBPorts installer!
Now i'm glad to have a running device and i stricktly avoid to power it down...
Btw: after reflashing to android the battery power was only 1%. This after shutdown only 48h before. So the shutdown was defintly incomplete and the device drained the battery strongly.
My question now: is this a BQ problem? Or is it a UT bug?

I think your battery was drained just in time when you plugged it in. When that happened to me i could not connect it to my computer. Your reflash was most likely not necessary.

Bug is with UT. Never happened to me when i used Android.

]]>https://forums.ubports.com/post/7564https://forums.ubports.com/post/7564Sat, 10 Mar 2018 08:28:07 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Tue, 13 Mar 2018 18:08:09 GMT]]>@bruno I'm glad you're back on board.

Just in case someone comes here with a similar problem, looking for a solution: Contact BQ support, they'll ask you for the serial number of the Ubuntu tablet, and then they'll give you the link for the tools and image.

EDIT: This is the link for downloads: http://www.mibqyyo.com/descargas/

]]>https://forums.ubports.com/post/7542https://forums.ubports.com/post/7542Tue, 13 Mar 2018 18:08:09 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Wed, 07 Mar 2018 14:49:02 GMT]]>@bruno I am glad its working for you , I sent mine (fhd) back to BQ to get the nvram+10 err, fixed ,but they cannot find it now . lost or or .

]]>https://forums.ubports.com/post/7535https://forums.ubports.com/post/7535Wed, 07 Mar 2018 14:49:02 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Wed, 07 Mar 2018 08:59:55 GMT]]>@marathon2422 That's it! By using the BQ flash tool i could reawake my device.

Unfortunaltly i had to flash my device with am android package cause BQ don't provide an ubuntu package for the HD edition anymore. Afterwards i could reflash the device back to UT by using the UBPorts installer!
Now i'm glad to have a running device and i stricktly avoid to power it down...

Btw: after reflashing to android the battery power was only 1%. This after shutdown only 48h before. So the shutdown was defintly incomplete and the device drained the battery strongly.
My question now: is this a BQ problem? Or is it a UT bug?

Thanks to all for giving me tips and advices! Now i can restart with UT πŸ™‚

]]>https://forums.ubports.com/post/7529https://forums.ubports.com/post/7529Wed, 07 Mar 2018 08:59:55 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Tue, 06 Mar 2018 15:24:31 GMT]]>@bruno can you read Spanish? In the BQ forum some people had a similar problem like yours http://www.mibqyyo.com/comunidad/categories/gama-m-tablets

It seems the first thing to do is to try a soft reset and if that doesn't work, a hard reset.

I don't know where you are but maybe you could also try to contact BQ customer service.

Good luck!

]]>https://forums.ubports.com/post/7518https://forums.ubports.com/post/7518Tue, 06 Mar 2018 15:24:31 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Tue, 06 Mar 2018 04:00:23 GMT]]>You could try reflashing with BQ tool ,do everything,press download etc,then connect your device,with your PC sound turned up ,if no result ,try any button option while connected, to ,including unplugging and plugging it back in, because the flash tool is expecting a turned off device -- OR go with draining the battery down ,then recharging it FULLY ,before you try anything.

]]>https://forums.ubports.com/post/7513https://forums.ubports.com/post/7513Tue, 06 Mar 2018 04:00:23 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Tue, 06 Mar 2018 00:00:57 GMT]]>@bruno : sorry but I can figure out that it is so long as 5 minutes. From memory, between 1 and 2 minutes, at most 3. It is likely that it won't succeed.
Good luck

]]>https://forums.ubports.com/post/7512https://forums.ubports.com/post/7512Tue, 06 Mar 2018 00:00:57 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 23:23:01 GMT]]>@pulsar33 I tried your tip serveral times thie evening, but it doesn't work until now. Maybe i'm too impatient Pehaps 5 minutes are not enough...

]]>https://forums.ubports.com/post/7511https://forums.ubports.com/post/7511Mon, 05 Mar 2018 23:23:01 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 23:14:18 GMT]]>@andromeda I have a LiPo charger/discharger. I thinking about discharching the battery. But therfore i have to open the battery to bypass the protection circuit ...

]]>https://forums.ubports.com/post/7510https://forums.ubports.com/post/7510Mon, 05 Mar 2018 23:14:18 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 23:05:37 GMT]]>@marathon2422 said in BQ Aquaris M10 HD won't turn on:

(...) ,make sure it goes off (...) it needs to go completely off (...)

but how can i force a complete shutdown? The screen is totally black, but the cpu is a little bit warm, even 2-3 h past turn off.

]]>https://forums.ubports.com/post/7509https://forums.ubports.com/post/7509Mon, 05 Mar 2018 23:05:37 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 22:56:50 GMT]]>@advocatux I connected the device for > 4h to the power supply and i tried to start serveral times but it still doesn't start... 😞

]]>https://forums.ubports.com/post/7508https://forums.ubports.com/post/7508Mon, 05 Mar 2018 22:56:50 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 22:25:41 GMT]]>I have had this happen to me twice (from memory), back in the early days when powering down. The first time I pressed the power button for what seemed like 5 minutes and then it came back up. When I removed my finger, I had the power button imprint there for a short time after. The second time I too left it for a few days and then it came back up all OK. So now I do not power the tablet down at all, I just turn the flight mode on (to save battery) and leave it to go into sleep mode.

]]>https://forums.ubports.com/post/7506https://forums.ubports.com/post/7506Mon, 05 Mar 2018 22:25:41 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 18:39:00 GMT]]>Hi,
I have a BQ E5 Ubuntu Edition (not a M10) and I don't know if this can help but I try :
Every time I turn my E5 into Access Point, the next Sleep Mode seems to brick the phone.
The first time, it was tragic as I was in the hospital and it was my only link with my family and more.
I tried many action randomly and finally I found that solution :
Push Power AND Vol+ AND Vol- as long as needed to have a restart
I say as long as needed because it seems very long to me (I've done this several times but never count the time, sorry). Try more than a minute but release the buttons if you see something appearing on the screen.
The workaround to avoid this freezing is to manually restart the phone after turning off the Access Point before the phone go to sleep.
Regards

]]>https://forums.ubports.com/post/7504https://forums.ubports.com/post/7504Mon, 05 Mar 2018 18:39:00 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 18:09:53 GMT]]>Maybe try all the other tips before putting anything in the freezer πŸ˜„

]]>https://forums.ubports.com/post/7501https://forums.ubports.com/post/7501Mon, 05 Mar 2018 18:09:53 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 14:51:20 GMT]]>That has happened to me also. I thought it was bricked, but after few days battery had drained and it started working again. I believe you are having the same issue, it did not shut down completely.

Let it be for few days and try power button again. Put it in freezer to hasten battery drain.

]]>https://forums.ubports.com/post/7497https://forums.ubports.com/post/7497Mon, 05 Mar 2018 14:51:20 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 14:08:45 GMT]]>Watch your screen,when you turn it off ,make sure it goes off, it will go dark but still lit around the edges,it needs to go completely off,had this with mine and original m10fhd,when new

]]>https://forums.ubports.com/post/7496https://forums.ubports.com/post/7496Mon, 05 Mar 2018 14:08:45 GMT<![CDATA[Reply to BQ Aquaris M10 HD won't turn on [solved] on Mon, 05 Mar 2018 18:08:18 GMT]]>@bruno I have experienced that annoying behavior with some BQ Android tablets. The solution was to connect the power supply to the tablet, let it do it thing, and then the tablet starts normally after pressing the power button.

]]>https://forums.ubports.com/post/7495https://forums.ubports.com/post/7495Mon, 05 Mar 2018 18:08:18 GMT