<![CDATA[Call for testing: updated Pulseaudio from Ubuntu 16.04]]>I've (re-)imported the changes made to Pulseaudio in Ubuntu 16.04. This primarily improves the experience of using Bluetooth headsets with the phone. However, there's a report of regression due to these changes before. I've fixed that one specific regression, but I'm not sure if there's any other regression due to these changes.

Please only test this change on a device running the latest images from the devel channel, and test responsibly! In other words, try it on a spare device or when you know you'll be near a computer you can use for reflashing. [1]

To test, please follow the instruction:

  1. Mount a tmpfs so apt can breathe: sudo mount -t tmpfs tmpfs /var/cache/apt/archives
  2. Install the repository: sudo ubports-qa install xenial_-_pulseaudio-updates-to-0ubuntu3.10
  3. Reboot your phone.

See if there's any regression in both built-in speaker, wired headset and Bluetooth headset. If possible, use a Bluetooth headset that can be in both music mode (hi-fidelity audio) and call mode (low-latency 2-way audio).

You may want to also follow this test plan from Canonical if you want to be extra sure there's no regression: https://wiki.ubuntu.com/Process/Merges/TestPlan/pulseaudio

Note for OnePlus One users: It's been reported that Bluetooth on OnePlus One is unstable in general. Thus, you may want to skip testing Bluetooth on this particular device.

Known issue: The issue that the playing streams won't switch to the headset after a re-connect is known, and will be fixed after this [2].

[1] This specific instruction courtesy of Dalton Durst.
[2] https://github.com/ubports/ubuntu-touch/issues/1045

]]>https://forums.ubports.com/topic/3420/call-for-testing-updated-pulseaudio-from-ubuntu-16-04RSS for NodeSat, 09 May 2026 18:23:21 GMTFri, 22 Nov 2019 14:02:08 GMT60<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Fri, 10 Jan 2020 18:04:18 GMT]]>@dR0W Ok. It seems like Pulseaudio is unable to enable "voice call mode" on your BT headset for some reason. To help investigate this, please follow this:

  1. Disconnect the headset if connected.
  2. Run echo 'exec pulseaudio --start -vv --log-target=syslog' >~/.config/upstart/pulseaudio.override to enable additional logging on Pulseaudio.
  3. Run initctl stop pulseaudio then initctl start pulseaudio. Note that restarting it won't take the settings above into effect.
  4. Now, connect your headset, then have a call.
  5. Send me the file /var/log/syslog. I'm not sure if it contains sensitive information or not, so you can PM me if you want.
  6. After testing, remove the config file by rm ~/.config/upstart/pulseaudio.override

Also, if possible, could you please retry this with the old version of Pulseaudio?

]]>https://forums.ubports.com/post/27186https://forums.ubports.com/post/27186Fri, 10 Jan 2020 18:04:18 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Wed, 08 Jan 2020 06:56:29 GMT]]>Hi @peat_psuwit, here you have the requested "on calling" output log:

2 card(s) available.
    index: 0
	name: <droid_card.primary>
	driver: <module-droid-card.c>
	owner module: 5
	properties:
		droid.hw_module = "primary"
		device.icon_name = "audio-card"
	profiles:
		primary-primary: primary output and primary input. (priority 300, available: yes)
		voicecall: Call mode (priority 0, available: yes)
		voicecall-record: Call mode record (priority 0, available: yes)
		communication: Communication mode (priority 0, available: yes)
		ringtone: Ringtone mode (priority 0, available: yes)
		off: Apagado (priority 0, available: unknown)
	active profile: <voicecall>
	sinks:
		sink.primary/#0: Droid sink primary
	sources:
		sink.primary.monitor/#0: Monitor of Droid sink primary
		source.primary/#1: Droid source primary
	ports:
		output-earpiece: Output to earpiece (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker: Output to speaker (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		output-wired_headset: Output to wired headset (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-wired_headphone: Output to wired headphone (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-bluetooth_sco: Output to bluetooth sco (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_headset: Output to sco headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_carkit: Output to sco carkit (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-aux_digital: Output to aux digital (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-analog_dock_headset: Output to analog dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-digital_dock_headset: Output to digital dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker+wired_headphone: Output to speaker+wired headphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
		input-communication: Input from communication (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-ambient: Input from ambient (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-builtin_mic: Input from builtin mic (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		input-bluetooth_sco_headset: Input from bluetooth sco headset (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-wired_headset: Input from wired headset (priority 500, latency offset 0 usec, available: no)
			properties:
				
		input-aux_digital: Input from aux digital (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-voice_call: Input from voice call (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-back_mic: Input from back mic (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-default: Input from default (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		input-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
    index: 1
	name: <bluez_card.57_D3_98_09_C8_61>
	driver: <module-bluez5-device.c>
	owner module: 23
	properties:
		device.description = "MDR-AS700BT"
		device.string = "57:D3:98:09:C8:61"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_57_D3_98_09_C8_61"
		bluez.class = "0x240404"
		bluez.alias = "MDR-AS700BT"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	profiles:
		headset_head_unit: Unidad de auriculares (HSP/HFP) (priority 20, available: no)
		a2dp_sink: Reproducción de alta fidelidad (A2DP Sink) (priority 10, available: unknown)
		off: Apagado (priority 0, available: yes)
	active profile: <a2dp_sink>
	sinks:
		bluez_sink.57_D3_98_09_C8_61/#2: MDR-AS700BT
	sources:
		bluez_sink.57_D3_98_09_C8_61.monitor/#4: Monitor of MDR-AS700BT
	ports:
		headset-output: Auriculares (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
		headset-input: Auriculares (priority 0, latency offset 0 usec, available: no)
			properties:
]]>https://forums.ubports.com/post/27093https://forums.ubports.com/post/27093Wed, 08 Jan 2020 06:56:29 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Tue, 07 Jan 2020 13:38:02 GMT]]>@dR0W Thank you for the information. I see something incorrect in the "in calling" case. However, I'm unable to pin it down yet. Could you please give me the output of pacmd list-cards while in the call?

]]>https://forums.ubports.com/post/27056https://forums.ubports.com/post/27056Tue, 07 Jan 2020 13:38:02 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Tue, 07 Jan 2020 07:31:50 GMT]]>Hi @peat_psuwit,
I'm using a Bluetooth headset (SONY MDR-AS700BT) and running devel version 432 in BQ Aquaris E4.5 .
Here You have the requested outputs:

  1. Output playing music before calling:
3 sink(s) available.
    index: 0
	name: <sink.primary>
	driver: <module-droid-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 0
	fixed latency: 92,00 ms
	card: 0 <droid_card.primary>
	module: 5
	properties:
		device.description = "Droid sink primary"
		device.class = "sound"
		droid.hw_module = "primary"
		device.icon_name = "audio-card"
	ports:
		output-earpiece: Output to earpiece (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker: Output to speaker (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		output-wired_headset: Output to wired headset (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-wired_headphone: Output to wired headphone (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-bluetooth_sco: Output to bluetooth sco (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_headset: Output to sco headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_carkit: Output to sco carkit (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-aux_digital: Output to aux digital (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-analog_dock_headset: Output to analog dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-digital_dock_headset: Output to digital dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker+wired_headphone: Output to speaker+wired headphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <output-speaker>
    index: 1
	name: <sink.fake.sco>
	driver: <module-null-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: mono: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 31 KiB
	max rewind: 31 KiB
	monitor source: 2
	sample spec: s16le 1ch 8000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	module: 7
	properties:
		device.description = "Salida Nula"
		device.class = "abstract"
		device.icon_name = "audio-card"
  * index: 2
	name: <bluez_sink.57_D3_98_09_C8_61>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: 
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 31,50 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 1
	linked by: 2
	fixed latency: 45,32 ms
	card: 1 <bluez_card.57_D3_98_09_C8_61>
	module: 23
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "MDR-AS700BT"
		device.string = "57:D3:98:09:C8:61"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_57_D3_98_09_C8_61"
		bluez.class = "0x240404"
		bluez.alias = "MDR-AS700BT"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	ports:
		headset-output: Auriculares (priority 0, latency offset 0 usec, available: yes)
			properties:
				
	active port: <headset-output>
  1. Output ringing:
3 sink(s) available.
  * index: 0
	name: <sink.primary>
	driver: <module-droid-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: RUNNING
	suspend cause: 
	priority: 9000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 92,00 ms
	max request: 4 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 1
	linked by: 1
	fixed latency: 92,00 ms
	card: 0 <droid_card.primary>
	module: 5
	properties:
		device.description = "Droid sink primary"
		device.class = "sound"
		droid.hw_module = "primary"
		device.icon_name = "audio-card"
	ports:
		output-earpiece: Output to earpiece (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker: Output to speaker (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		output-wired_headset: Output to wired headset (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-wired_headphone: Output to wired headphone (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-bluetooth_sco: Output to bluetooth sco (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_headset: Output to sco headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_carkit: Output to sco carkit (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-aux_digital: Output to aux digital (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-analog_dock_headset: Output to analog dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-digital_dock_headset: Output to digital dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker+wired_headphone: Output to speaker+wired headphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <output-speaker+wired_headphone>
    index: 1
	name: <sink.fake.sco>
	driver: <module-null-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: mono: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 31 KiB
	max rewind: 31 KiB
	monitor source: 2
	sample spec: s16le 1ch 8000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	module: 7
	properties:
		device.description = "Salida Nula"
		device.class = "abstract"
		device.icon_name = "audio-card"
    index: 2
	name: <bluez_sink.57_D3_98_09_C8_61>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 2
	fixed latency: 45,32 ms
	card: 1 <bluez_card.57_D3_98_09_C8_61>
	module: 23
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "MDR-AS700BT"
		device.string = "57:D3:98:09:C8:61"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_57_D3_98_09_C8_61"
		bluez.class = "0x240404"
		bluez.alias = "MDR-AS700BT"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	ports:
		headset-output: Auriculares (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <headset-output>
  1. Output in calling:
3 sink(s) available.
  * index: 0
	name: <sink.primary>
	driver: <module-droid-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 1
	fixed latency: 92,00 ms
	card: 0 <droid_card.primary>
	module: 5
	properties:
		device.description = "Droid sink primary"
		device.class = "sound"
		droid.hw_module = "primary"
		device.icon_name = "audio-card"
	ports:
		output-earpiece: Output to earpiece (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker: Output to speaker (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		output-wired_headset: Output to wired headset (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-wired_headphone: Output to wired headphone (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-bluetooth_sco: Output to bluetooth sco (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_headset: Output to sco headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_carkit: Output to sco carkit (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-aux_digital: Output to aux digital (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-analog_dock_headset: Output to analog dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-digital_dock_headset: Output to digital dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker+wired_headphone: Output to speaker+wired headphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <output-earpiece>
    index: 1
	name: <sink.fake.sco>
	driver: <module-null-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: mono: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 31 KiB
	max rewind: 31 KiB
	monitor source: 2
	sample spec: s16le 1ch 8000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	module: 7
	properties:
		device.description = "Salida Nula"
		device.class = "abstract"
		device.icon_name = "audio-card"
    index: 2
	name: <bluez_sink.57_D3_98_09_C8_61>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 2
	fixed latency: 45,32 ms
	card: 1 <bluez_card.57_D3_98_09_C8_61>
	module: 23
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "MDR-AS700BT"
		device.string = "57:D3:98:09:C8:61"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_57_D3_98_09_C8_61"
		bluez.class = "0x240404"
		bluez.alias = "MDR-AS700BT"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	ports:
		headset-output: Auriculares (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <headset-output>

4.- Output after calling:

3 sink(s) available.
    index: 0
	name: <sink.primary>
	driver: <module-droid-card.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9000
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 0 KiB
	max rewind: 0 KiB
	monitor source: 0
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 0
	fixed latency: 92,00 ms
	card: 0 <droid_card.primary>
	module: 5
	properties:
		device.description = "Droid sink primary"
		device.class = "sound"
		droid.hw_module = "primary"
		device.icon_name = "audio-card"
	ports:
		output-earpiece: Output to earpiece (priority 200, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker: Output to speaker (priority 300, latency offset 0 usec, available: unknown)
			properties:
				
		output-wired_headset: Output to wired headset (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-wired_headphone: Output to wired headphone (priority 400, latency offset 0 usec, available: no)
			properties:
				
		output-bluetooth_sco: Output to bluetooth sco (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_headset: Output to sco headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-sco_carkit: Output to sco carkit (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-aux_digital: Output to aux digital (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-analog_dock_headset: Output to analog dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-digital_dock_headset: Output to digital dock headset (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-speaker+wired_headphone: Output to speaker+wired headphone (priority 100, latency offset 0 usec, available: unknown)
			properties:
				
		output-parking: Parking port (priority 50, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <output-speaker>
    index: 1
	name: <sink.fake.sco>
	driver: <module-null-sink.c>
	flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 1000
	volume: mono: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 31 KiB
	max rewind: 31 KiB
	monitor source: 2
	sample spec: s16le 1ch 8000Hz
	channel map: mono
	             Mono
	used by: 0
	linked by: 0
	configured latency: 0,00 ms; range is 0,50 .. 2000,00 ms
	module: 7
	properties:
		device.description = "Salida Nula"
		device.class = "abstract"
		device.icon_name = "audio-card"
  * index: 2
	name: <bluez_sink.57_D3_98_09_C8_61>
	driver: <module-bluez5-device.c>
	flags: HARDWARE DECIBEL_VOLUME LATENCY 
	state: SUSPENDED
	suspend cause: IDLE 
	priority: 9030
	volume: front-left: 65536 / 100% / 0,00 dB,   front-right: 65536 / 100% / 0,00 dB
	        balance 0,00
	base volume: 65536 / 100% / 0,00 dB
	volume steps: 65537
	muted: no
	current latency: 0,00 ms
	max request: 3 KiB
	max rewind: 0 KiB
	monitor source: 4
	sample spec: s16le 2ch 44100Hz
	channel map: front-left,front-right
	             Estéreo
	used by: 0
	linked by: 2
	fixed latency: 45,32 ms
	card: 1 <bluez_card.57_D3_98_09_C8_61>
	module: 23
	properties:
		bluetooth.protocol = "a2dp_sink"
		device.description = "MDR-AS700BT"
		device.string = "57:D3:98:09:C8:61"
		device.api = "bluez"
		device.class = "sound"
		device.bus = "bluetooth"
		device.form_factor = "headset"
		bluez.path = "/org/bluez/hci0/dev_57_D3_98_09_C8_61"
		bluez.class = "0x240404"
		bluez.alias = "MDR-AS700BT"
		device.icon_name = "audio-headset-bluetooth"
		device.intended_roles = "phone"
	ports:
		headset-output: Auriculares (priority 0, latency offset 0 usec, available: unknown)
			properties:
				
	active port: <headset-output>

You can say me if you need more info.

]]>https://forums.ubports.com/post/27050https://forums.ubports.com/post/27050Tue, 07 Jan 2020 07:31:50 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Thu, 02 Jan 2020 19:59:12 GMT]]>@dR0W I've just received my BQ E4.5. Unfortunately, I'm unable to reproduce the problem you reported. I would like a bit more info from you:

  1. Are you using a wired or Bluetooth headset? If using Bluetooth, what make & model is it?
  2. Do you know how to use ADB/Developer mode? If so, please give me the result of pacmd list-sinks before, during, and after the call. If not (and you're interested in doing so), the instruction is available on the UBports website.
]]>https://forums.ubports.com/post/26866https://forums.ubports.com/post/26866Thu, 02 Jan 2020 19:59:12 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Tue, 26 Nov 2019 07:53:27 GMT]]>Sorry @peat_psuwit, I don't now if this is a regression. I only can tell you that I was playing music correctly and then I received an incoming call, then the music playing stopped correctly but I couldn't hear nothing through the headset.
I can test all that you need, but in that way give me instructions for testing so I will give you more information.

]]>https://forums.ubports.com/post/25335https://forums.ubports.com/post/25335Tue, 26 Nov 2019 07:53:27 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Mon, 25 Nov 2019 19:19:57 GMT]]>@dR0W Is it regression or it has been in this way for some time already?

]]>https://forums.ubports.com/post/25304https://forums.ubports.com/post/25304Mon, 25 Nov 2019 19:19:57 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Mon, 25 Nov 2019 12:56:59 GMT]]>Tested on BQ E4.5 and only audio music playing works correctly. When in calling mode, no sound is route to headset.
Thanks for working in this patch.

]]>https://forums.ubports.com/post/25295https://forums.ubports.com/post/25295Mon, 25 Nov 2019 12:56:59 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Sun, 24 Nov 2019 14:53:55 GMT]]>@Stefano Thank you for testing and posting.

]]>https://forums.ubports.com/post/25262https://forums.ubports.com/post/25262Sun, 24 Nov 2019 14:53:55 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Sun, 24 Nov 2019 14:28:03 GMT]]>@mihael Sadly, not any improvement. Sound did not get through, it did connect to Volvo Truck Bluetooth though. But it never worked on Pro5...

]]>https://forums.ubports.com/post/25259https://forums.ubports.com/post/25259Sun, 24 Nov 2019 14:28:03 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Sun, 24 Nov 2019 06:47:42 GMT]]>Did anyone test this on a Pro 5? - I'm on rc channel so I cannot test this right now. I'm very excited about any improvements to bluetooth audio...

]]>https://forums.ubports.com/post/25250https://forums.ubports.com/post/25250Sun, 24 Nov 2019 06:47:42 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Sat, 23 Nov 2019 23:03:14 GMT]]>@mihael sorry Nexus 5 on the latest devel

]]>https://forums.ubports.com/post/25245https://forums.ubports.com/post/25245Sat, 23 Nov 2019 23:03:14 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Sat, 23 Nov 2019 07:12:09 GMT]]>@geekvine On what device?

]]>https://forums.ubports.com/post/25211https://forums.ubports.com/post/25211Sat, 23 Nov 2019 07:12:09 GMT<![CDATA[Reply to Call for testing: updated Pulseaudio from Ubuntu 16.04 on Fri, 22 Nov 2019 22:51:48 GMT]]>Not sure if we should be replying here or on issue 1045 so i'll just go ahead and post here for now.

I noticed no issue with audio on any application that i tried while using the headset audio and a wired headset. Bluetooth audio is great for music and system sounds but still awful while making a call (audio feedback on the headphone side, mic volume appears to be too low on the other end of the call).

On the plus side, once i ended the call, the phone immediately continued playing music on the Bluetooth headset. For completeness, I tested this with three bluetooth headsets and two bluetooth speakers with built in mics.

]]>https://forums.ubports.com/post/25206https://forums.ubports.com/post/25206Fri, 22 Nov 2019 22:51:48 GMT