<![CDATA[MMS success and failure]]>I have an OP6. I am UT ver 40 RC. MMS seems to be a continuing issue, at least for me. My testing is done from an iphone using Wifi and Google Voice.
Test one) I sent a text message to my OP6 and it works every time.
Test two) I sent a photo to my OP6. Wifi was on and the picture came through. I have not been able to recreate receipt with Wifi on.
Test Three) I sent a picture to my OP6. Wifi was off and I received the oops message. I turned the Wifi on and after 1 minute I pushed Download and received another oops message.
Test four) I sent a picture to my OP6. Wifi was on and I received an oops message. I turned Wifi off, waited, hit Download, and I received the picture.
Test five) I sent a picture to my OP6. Wifi is off and I received the picture.
Test six) I sent a picture to my OP6. Wifi is on and I received the oops message. I turned Wifi off and waited at least one minute to press Download. The download button would grey for a second, turn black again, and I would receive a chime as if another message was received. I waited a while then pressed the black Download button again, holding it a bit and then my picture showed up. I do not know if the receipt was due to the first push or the 2nd push and hold.
Test seven) I sent a picture to my OP6. Wifi was on. oops message received. Turned Wifi off, waited and pushed Download and waited waited (good couple of minutes) and then picture was received.
Final test) I sent a picture to my OP6. Wifi was on and I received an oops message. Turned Wifi off, waited 2 minutes, pushed Download and the phone chimed but the button stayed black. I waited a minute and then pressed and held the Download button and then the picture arrived.
Last night I had two oops messages. Neither message ended up coming through no matter what was on or off.
My assessment is that the 'fix' is working most/some of the time but not fully reliable. It is better than before though. I am sure some would admit that even with the 'fix' it is not as desired. I am fine dealing with it the way it is while waiting for future upgrades unless others are also still having issues. I appreciate the work so far. My Cellular/Apn settings are set to 2G/3G/4G and APN (as described by Rik Shaw on NA Carrier Channel:
Used For: Internet
Name: T-Mobile Internet
APN: epc.tmobile.com
<User Name and Password BLANK>

Used For: MMS
Name: US Mobile MMS
APN: pwg
MMSC: http://pwg.mmsmvno.com/mms/wapenc
<Proxy, Proxy Port, User Name, Password ALL BLANK>

]]>https://forums.ubports.com/topic/7200/mms-success-and-failureRSS for NodeThu, 14 May 2026 01:02:49 GMTSat, 01 Jan 2022 23:17:13 GMT60<![CDATA[Reply to MMS success and failure on Sat, 12 Mar 2022 17:41:36 GMT]]>@fizz Hello, I've been able to make a test using the approach described above. The test was done in stable channel (OTA-22) after reboot and the commands have been punched via ssh.

  1. I sent myself a testing multimedia message via the nuntium-inject-push testing helper tool.

    phablet@ubuntu-phablet:~$ sudo ./nuntium-inject-push -s +421908353517 --sender-notification +421908353517 --transaction-id test-wget --error-activate-context=1
[sudo] password for phablet: 
No end-point flag provided, trying to retrieve end-point from nuntium logs in: /home/phablet/.cache/upstart
Using endpoint: ":1.55"
Creating web server to serve mms
Denial count: 0

    The notification was delivered to messaging-app
    Screenshot - Message with notification

  2. I looked at the ~/.cache/upstart/nuntium.log

    phablet@ubuntu-phablet:~$ tail .cache/upstart/nuntium.log
00000060  39 30 38 33 35 33 35 31  37 2f 54 59 50 45 3d 50  |908353517/TYPE=P|
00000070  4c 4d 4e 00 8a 80 8e 02  74 00 88 05 81 03 02 a2  |LMN.....t.......|
00000080  ff 83 68 74 74 70 3a 2f  2f 6c 6f 63 61 6c 68 6f  |..http://localho|
00000090  73 74 3a 39 31 39 31 2f  6d 6d 73 3f 65 72 72 6f  |st:9191/mms?erro|
000000a0  72 2d 61 63 74 69 76 61  74 65 2d 63 6f 6e 74 65  |r-activate-conte|
000000b0  78 74 3d 31 00                                    |xt=1.|
2022/03/11 18:10:19 This is a local test, skipping context activation and proxy settings
2022/03/11 18:10:19 Forcing debug error: main.downloadError{standartizedError:main.standartizedError{error:"error-activate-context", code:"x-ubports-nuntium-mms-error-activate-context"}}
2022/03/11 18:10:31 Received unknown method call on org.ofono.mms.Message MarkRead
2022/03/11 18:10:31 Message /org/ofono/mms/231014453153205/cb2e5a6911b100a99a13927694308474 is not responded and not expired, not deleting.

    and extracted the message UUID cb2e5a6911b100a99a13927694308474 and download link http://localhost:9191/mms.
    (Note: in the log there is "?error-activate-context=1" in the url. This is a testing string specific for the nuntium-inject-push tool and I know it's safe to remove. In real world usage use the whole link)

  3. I downloaded the message content with wget using the download link into the storage as <UUID>.mms

    phablet@ubuntu-phablet:~$ wget -O - http://localhost:9191/mms > ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.mms
--2022-03-11 18:23:50--  http://localhost:9191/mms
Resolving localhost (localhost)... ::1, 127.0.0.1
Connecting to localhost (localhost)|::1|:9191... failed: Connection refused.
Connecting to localhost (localhost)|127.0.0.1|:9191... connected.
HTTP request sent, awaiting response... 200 OK
Length: 3405 (3,3K) [application/octet-stream]
Saving to: ‘STDOUT’

-                                      100%[=========================================================================>]   3,33K  --.-KB/s    in 0s      

2022-03-11 18:23:50 (79,2 MB/s) - written to stdout [3405/3405]

    And checked, if there is the file in the storage folder. (Note: I've also appended, what the files look like.)

    phablet@ubuntu-phablet:~$ ls -l ~/.local/share/nuntium/store/
total 8
-rw------- 1 phablet phablet  653 mar 11 18:10 cb2e5a6911b100a99a13927694308474.db
-rw-rw-r-- 1 phablet phablet 3405 mar 11 18:23 cb2e5a6911b100a99a13927694308474.mms

phablet@ubuntu-phablet:~$ head -c 200 ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.mms 
���test-wget���abcdefghipqrrst�TZ�7��+421908353517/TYPE=PLMN��application/smil�<smil>/�+pplication/smil�smil.xml�smil.xml�"<smil><smil>   <head>     <layout>         <region id="Image

phablet@ubuntu-phablet:~$ head ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.db
{"Id":"test-wget","State":"notification","ContentLocation":"http://localhost:9191/mms?error-activate-context=1","SendState":null,"ModemId":"231014453153205","MNotificationInd":{"MMSReader":null,"UUID":"cb2e5a6911b100a99a13927694308474","RedownloadOfUUID":"","Received":"2022-03-11T18:10:19.122527716+01:00","Type":130,"Version":144,"Class":128,"DeliveryReport":0,"ReplyCharging":0,"ReplyChargingDeadline":0,"Priority":0,"ReplyChargingId":"","TransactionId":"test-wget","ContentLocation":"http://localhost:9191/mms","From":"+421908353517/TYPE=PLMN","Subject":"","Expiry":"2022-03-13T18:10:18.122527716+01:00","Size":29696},"TelepathyErrorNotified":true}

  4. I edited the ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.db file and changed the State to "downloaded" and TelepathyErrorNotified to "false".

    phablet@ubuntu-phablet:~$ sed -i 's/"State":"notification"/"State":"downloaded"/' ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.db 
phablet@ubuntu-phablet:~$ sed -i 's/"TelepathyErrorNotified":true/"TelepathyErrorNotified":false/' ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.db 
phablet@ubuntu-phablet:~$ head ~/.local/share/nuntium/store/cb2e5a6911b100a99a13927694308474.db
{"Id":"test-wget","State":"downloaded","ContentLocation":"http://localhost:9191/mms?error-activate-context=1","SendState":null,"ModemId":"231014453153205","MNotificationInd":{"MMSReader":null,"UUID":"cb2e5a6911b100a99a13927694308474","RedownloadOfUUID":"","Received":"2022-03-11T18:10:19.122527716+01:00","Type":130,"Version":144,"Class":128,"DeliveryReport":0,"ReplyCharging":0,"ReplyChargingDeadline":0,"Priority":0,"ReplyChargingId":"","TransactionId":"test-wget","ContentLocation":"http://localhost:9191/mms","From":"+421908353517/TYPE=PLMN","Subject":"","Expiry":"2022-03-13T18:10:18.122527716+01:00","Size":29696},"TelepathyErrorNotified":false}

  5. I restarted nuntium (should be the same as restarting the phone)

    phablet@ubuntu-phablet:~$ initctl --user restart nuntium
nuntium start/running, process 10665

  6. There is the message instead of notification in the messaging app.
    Screenshot - Test message instead of notification

Here you can see the relevant logs produced in this test for comparsion.

For the record, I've also encountered a case, where the message was not delivered to messaging-app after restart, but it was due to bad wget usage, which produced an empty .mms file. So maybe if the file is somehow faulty, the message is not shown. This needs more investigation.

]]>https://forums.ubports.com/post/62796https://forums.ubports.com/post/62796Sat, 12 Mar 2022 17:41:36 GMT<![CDATA[Reply to MMS success and failure on Thu, 03 Mar 2022 21:22:57 GMT]]>@fizz said in MMS success and failure:

Actually, the .db State is now "received" (not my doing). TelepathyErrorNotified is still "false".

The "received" state means that the messege was forwarded to messaging-app, which is strange that it is not there. But more strange is, that I don't see any error in loggs, so the message should ended in "responded" state. As I said I have to test this approach on my phone.

Thank you for answering my questions. I'll write you, when I know more.

]]>https://forums.ubports.com/post/62531https://forums.ubports.com/post/62531Thu, 03 Mar 2022 21:22:57 GMT<![CDATA[Reply to MMS success and failure on Thu, 03 Mar 2022 04:29:02 GMT]]>@jezek said in MMS success and failure:

@fizz Hmm. I'm not smarter from the log. I'll have to test by myself. I'll come back to you.I hope it'll be soon. 😉

Meanwhile, please, could you write me, what is the state of the message .db, you have modified? Is it still "downloaded" and is the telepathy notified field still false? Thanks.

Actually, the .db State is now "received" (not my doing). TelepathyErrorNotified is still "false".

Thanks for your continued efforts in this.

-Fizz

]]>https://forums.ubports.com/post/62497https://forums.ubports.com/post/62497Thu, 03 Mar 2022 04:29:02 GMT<![CDATA[Reply to MMS success and failure on Tue, 01 Mar 2022 16:43:22 GMT]]>@fizz Hmm. I'm not smarter from the log. I'll have to test by myself. I'll come back to you.I hope it'll be soon. 😉

Meanwhile, please, could you write me, what is the state of the message .db, you have modified? Is it still "downloaded" and is the telepathy notified field still false? Thanks.

]]>https://forums.ubports.com/post/62448https://forums.ubports.com/post/62448Tue, 01 Mar 2022 16:43:22 GMT<![CDATA[Reply to MMS success and failure on Tue, 01 Mar 2022 00:27:17 GMT]]>Ok, here is the content of the file...

2022/02/28 18:58:32 Received ReceiveNotification() method call from 44600
2022/02/28 18:58:32 Push data
00000000  00 06 29 1f 22 61 70 70  6c 69 63 61 74 69 6f 6e  |..)."application|
00000010  2f 76 6e 64 2e 77 61 70  2e 6d 6d 73 2d 6d 65 73  |/vnd.wap.mms-mes|
00000020  73 61 67 65 00 81 84 af  84 8d 01 00 8c 82 98 39  |sage...........9|
00000030  30 64 65 34 30 62 66 61  63 36 36 30 39 63 62 63  |0de40bfac6609cbc|
00000040  66 38 66 35 38 36 32 2d  31 00 8d 92 89 1a 80 18  |f8f5862-1.......|
00000050  ea 2b 31 35 31 39 38 35  39 30 35 34 37 2f 54 59  |.+15198590547/TY|
00000060  50 45 3d 50 4c 4d 4e 00  96 00 8a 80 88 05 81 03  |PE=PLMN.........|
00000070  09 3a 7e 86 81 83 68 74  74 70 3a 2f 2f 6d 6d 73  |.:~...http://mms|
00000080  63 32 2e 67 65 74 2e 62  65 6c 6c 2e 63 61 2f 63  |c2.get.bell.ca/c|
00000090  6c 6f 75 64 6d 6d 73 63  3f 6c 3d 39 30 64 65 34  |loudmmsc?l=90de4|
000000a0  30 62 66 61 63 36 36 30  39 63 62 63 66 38 66 35  |0bfac6609cbcf8f5|
000000b0  38 36 32 2d 31 00 8e 03  04 72 0a                 |862-1....r.|
2022/02/28 18:58:32 Trying to set Active property to true for context on true /ril_0/context2
2022/02/28 18:58:33 Download issues: org.freedesktop.DBus.Error.InvalidArgs: Invalid URL: ''
2022/02/28 18:58:33 Trying to set Active property to false for context on false /ril_0/context2
2022/02/28 18:58:45 Received unknown method call on org.ofono.mms.Message MarkRead
2022/02/28 18:58:45 Message /org/ofono/mms/302610917674682/843fd46d18383e9984a830164d648aad is not responded and not expired, not deleting.
2022/02/28 18:58:45 Received unknown method call on org.ofono.mms.Message MarkRead
2022/02/28 18:58:45 Message /org/ofono/mms/302610917674682/843fd46d18383e9984a830164d648aad is not responded and not expired, not deleting.
2022/02/28 19:08:54 Using session bus on :1.5
2022/02/28 19:08:54 Registered :1.5 on bus as org.ofono.mms
2022/02/28 19:08:54 Using system bus on :1.37
2022/02/28 19:08:54 Initializing modem /ril_0
2022/02/28 19:08:54 Modem online: true
2022/02/28 19:08:56 Identity added 302610917674682
2022/02/28 19:08:56 Service added /org/ofono/mms/302610917674682
2022/02/28 19:08:56 Initializing 3 messages from storage
2022/02/28 19:08:56 Message af88a769e57deda43a2b1e7a4e2d56e7 is not an incoming message. State: draft
2022/02/28 19:08:56 Using deprecated Start header
2022/02/28 19:08:56 Using deprecated Name header
2022/02/28 19:08:56 Using deprecated Name header
2022/02/28 19:08:56 Using deprecated Name header
2022/02/28 19:08:56 Push interface state: true
2022/02/28 19:08:57 Using deprecated Start header
2022/02/28 19:08:57 Using deprecated Name header
2022/02/28 19:08:57 Using deprecated Name header
2022/02/28 19:08:57 Using deprecated Name header
2022/02/28 19:08:57 Received GetServices()
2022/02/28 19:09:38 Redownload of /org/ofono/mms/302610917674682/843fd46d18383e9984a830164d648aad is not allowed
]]>https://forums.ubports.com/post/62434https://forums.ubports.com/post/62434Tue, 01 Mar 2022 00:27:17 GMT<![CDATA[Reply to MMS success and failure on Tue, 01 Mar 2022 00:24:19 GMT]]>@jezek said in MMS success and failure:

@fizz Can you post, or PM me the ~/.cache/upstart/nuntium.log, please?

Hrmmm... i don't have a nuntium.log there. I do have a nuntium.log.1.gz however.

I presume this is a zipped file, so i ran gzip on it and was able to open. I'll post it in the next message.

FYI, i did re-run through the whole process with a new image sent to me. Same result as before- constant spinning.

-Fizz

]]>https://forums.ubports.com/post/62433https://forums.ubports.com/post/62433Tue, 01 Mar 2022 00:24:19 GMT<![CDATA[Reply to MMS success and failure on Sun, 27 Feb 2022 16:50:59 GMT]]>@fizz Can you post, or PM me the ~/.cache/upstart/nuntium.log, please?

]]>https://forums.ubports.com/post/62407https://forums.ubports.com/post/62407Sun, 27 Feb 2022 16:50:59 GMT<![CDATA[Reply to MMS success and failure on Sun, 27 Feb 2022 01:40:04 GMT]]>@jezek
Oh, forgot to mention, i did do a phone reboot as the last part of the process... no change.
-Fizz

]]>https://forums.ubports.com/post/62390https://forums.ubports.com/post/62390Sun, 27 Feb 2022 01:40:04 GMT<![CDATA[Reply to MMS success and failure on Sun, 27 Feb 2022 00:15:57 GMT]]>@jezek said in MMS success and failure:

As i wrote before, the storage is in ~/.local/share/nuntium/store/. So yes, it is supposed to be in the same place as the <UUID>.db file.

Oh, when you said "... into the storage folder named as <uuid>.mms" i thought you meant <uuid>.mms was the name of the folder. OK, i see now.

So, i had a fresh test message sent to me, which created a file in nuntium/store of 873cbe.db (shortened for posting, it's not actually that short). I changed the .db file to have "State":"downloaded" and "TelepathyErrorNotified":false . I used wget to download the message, renamed it to match the .db file (so it's 873cbd.mms) and moved it into the nuntium/store directory.

All of this is quite the pain on a little phone... ugh. Anyways, the result... same as before... it's just spinning after i tell it to download.

-Fizz

]]>https://forums.ubports.com/post/62389https://forums.ubports.com/post/62389Sun, 27 Feb 2022 00:15:57 GMT<![CDATA[Reply to MMS success and failure on Sat, 26 Feb 2022 17:14:12 GMT]]>@fizz said in MMS success and failure:

Where is the <uuid>.mms folder located? I haven't found any folders named that way. Is it supposed to be in the same place as the <uuid>.db files? If so, should i create the folder manually?

As i wrote before, the storage is in ~/.local/share/nuntium/store/. So yes, it is supposed to be in the same place as the <UUID>.db file.

And should the downloaded file be named in any particular way, name or extension or otherwise?

The downloaded file should have the same name as the .db file, but different extension (.mms).
Example: There is a file

~/.local/share/nuntium/store $ ls                                                                                                                                          
00947a75dd5c33ff406f296bd5330caa.db

So after copying and renaming you should have

~/.local/share/nuntium/store $ ls                                                                                                                                          
00947a75dd5c33ff406f296bd5330caa.db
00947a75dd5c33ff406f296bd5330caa.mms
]]>https://forums.ubports.com/post/62384https://forums.ubports.com/post/62384Sat, 26 Feb 2022 17:14:12 GMT<![CDATA[Reply to MMS success and failure on Fri, 25 Feb 2022 22:17:27 GMT]]>@jezek said in MMS success and failure:

You forgot to copy the file downloaded with wget into the storage folder named as <UUID>.mms (replace the <UUID> with the actual UUID, as in the .db file name).

Where is the <uuid>.mms folder located? I haven't found any folders named that way. Is it supposed to be in the same place as the <uuid>.db files? If so, should i create the folder manually?

And should the downloaded file be named in any particular way, name or extension or otherwise?

-Fizz

]]>https://forums.ubports.com/post/62353https://forums.ubports.com/post/62353Fri, 25 Feb 2022 22:17:27 GMT<![CDATA[Reply to MMS success and failure on Fri, 25 Feb 2022 16:09:06 GMT]]>@fizz said in MMS success and failure:

OK, i gave this a try. I had a fresh message with an image attached sent to me. I got the usual MMS error warning as usual. I found the .db file and changed the State (note it doesn't have a field named "Status") to "downloaded" and TelepathyErroyNotified to false. I then restarted the entire phone.

You forgot to copy the file downloaded with wget into the storage folder named as <UUID>.mms (replace the <UUID> with the actual UUID, as in the .db file name).

]]>https://forums.ubports.com/post/62349https://forums.ubports.com/post/62349Fri, 25 Feb 2022 16:09:06 GMT<![CDATA[Reply to MMS success and failure on Fri, 25 Feb 2022 00:02:28 GMT]]>@jezek said in MMS success and failure:

@fizz Oh sorry I forgot, in the <UUID>.db file, in which you modified the status to "downloaded", you have to set the TelepathyErrorNotified field to "false".

Then on the next nuntium restart, it loads the <UUID>.db file, finds out that the file is downloaded (in the <UUID>.mms file), but some error happened (cause the message was stuck in "downloaded" state) and telepathy was not notified of the error. So it will try to send the message to the messaging-app again.

I hope it works. I currently am working on some fixes which should prevent the endless rotating pending circle. It's basicaly done, I'm just cleaning the code and beautifying the commits. I'll write when the PR(s) is(are) ready.

OK, i gave this a try. I had a fresh message with an image attached sent to me. I got the usual MMS error warning as usual. I found the .db file and changed the State (note it doesn't have a field named "Status") to "downloaded" and TelepathyErroyNotified to false. I then restarted the entire phone.

And... same thing as before. When i go back to the message and hig Download, it just keeps spinning non-stop, and i never get the image.

Also, even after another reboot of the phone, the button is still spinning.

-Fizz

]]>https://forums.ubports.com/post/62317https://forums.ubports.com/post/62317Fri, 25 Feb 2022 00:02:28 GMT<![CDATA[Reply to MMS success and failure on Thu, 24 Feb 2022 14:41:36 GMT]]>@fizz Oh sorry I forgot, in the <UUID>.db file, in which you modified the status to "downloaded", you have to set the TelepathyErrorNotified field to "false".

Then on the next nuntium restart, it loads the <UUID>.db file, finds out that the file is downloaded (in the <UUID>.mms file), but some error happened (cause the message was stuck in "downloaded" state) and telepathy was not notified of the error. So it will try to send the message to the messaging-app again.

I hope it works. I currently am working on some fixes which should prevent the endless rotating pending circle. It's basicaly done, I'm just cleaning the code and beautifying the commits. I'll write when the PR(s) is(are) ready.

]]>https://forums.ubports.com/post/62292https://forums.ubports.com/post/62292Thu, 24 Feb 2022 14:41:36 GMT<![CDATA[Reply to MMS success and failure on Mon, 21 Feb 2022 13:45:13 GMT]]>@jezek said in MMS success and failure:

@fizz hmm, when you have the file downloaded, you can exploit that nuntium can now recover from errors at startup.

For each (failed) message there is a .db file in storage in ~/.local/share/nuntium/store/ directory in format <UUID>.db. The file is in json format.

Copy the downloaded file into the "storage" directory named as <UUID>.mms (replace the <UUID> with actual UUID). After this, you have to change the status of message to "downloaded" by editing the .id file. Then after restarting the phone (or just nuntium with initctl --user restart nuntium command) the message should be decoded and sent to messaging-app.

Sorry for my delayed reply. I finally tried this. Unfortunately it still hasn't given me the message. It does behave differently though. Here's what i did:

I had an MMS (an image) sent to my mobile. I get the usual notification that the message could not be retrieved. When i press the "download" button, it tries for a couple seconds and stops, keeping the same error message.

I then followed your instructions above- found the .db file, changed the status to 'downloaded', and then restarted the mobile.

The results: when i re-opened the messenger, i still see the warning. I tried the 'download' button again, but now it just spins constantly, as though it's trying to download but never succeeds. It stopped trying after only a couple seconds before, but now it seemingly never stops- been going for a half-hour now.

-Fizz

]]>https://forums.ubports.com/post/62158https://forums.ubports.com/post/62158Mon, 21 Feb 2022 13:45:13 GMT<![CDATA[Reply to MMS success and failure on Fri, 28 Jan 2022 17:31:53 GMT]]>@rik If downloading the failed message is possible via wget command, maybe somebody should try to write an workaround into nuntium download function and try the wget approach if current download method via ubuntu-download-manager fails, until the udm is fixed. 😉

]]>https://forums.ubports.com/post/60991https://forums.ubports.com/post/60991Fri, 28 Jan 2022 17:31:53 GMT<![CDATA[Reply to MMS success and failure on Thu, 24 Feb 2022 14:29:47 GMT]]>@fizz hmm, when you have the file downloaded, you can exploit that nuntium can now recover from errors at startup.

For each (failed) message there is a .db file in storage in ~/.local/share/nuntium/store/ directory in format <UUID>.db. The file is in json format.

Copy the downloaded file into the "storage" directory named as <UUID>.mms (replace the <UUID> with actual UUID). After this, you have to change the status of message to "downloaded" by editing the .id.db file. Then after restarting the phone (or just nuntium with initctl --user restart nuntium command) the message should be decoded and sent to messaging-app.

]]>https://forums.ubports.com/post/60988https://forums.ubports.com/post/60988Thu, 24 Feb 2022 14:29:47 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 20:24:33 GMT]]>@rik
Unfortunately, viewing the head doesn't help. Most of it is those encoded characters, but there are a few html-like tags. The only obvious phone numbers, which are buried inside of the encoding, are both my own number (the number on this phone). I do see an image tag with filename, suggesting this was the image that was sent to me.

]]>https://forums.ubports.com/post/60929https://forums.ubports.com/post/60929Thu, 27 Jan 2022 20:24:33 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 19:33:39 GMT]]>@fizz said in MMS success and failure:

@rik
So downloading it to a .txt file allows me to see it. However, it is a huge file (2380 lines), and most of it filled with a pile of non-standard characters: diamonds, arabic (i think), cyrillic, diamonds, greek, etc etc. Basically, it looks encoded, and the majority of it is unreadable. It looks the same both in Seabass and through cat. I'm not sure it would even be postable in this forum. I can try if you think it's ok, but just giving fair warning.

Also to clarify, (because i misread your post about using wget), I have never successfully downloaded an mms message on this device. I can send fine, but have never successfully received an mms.

The best guess I have is that the carrier is encrypting the messages, sorry I don't know how this works but it must be. The first few lines should list readable phone numbers, you can view just those first lines with head filename.txt

]]>https://forums.ubports.com/post/60925https://forums.ubports.com/post/60925Thu, 27 Jan 2022 19:33:39 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 03:15:31 GMT]]>@rik
So downloading it to a .txt file allows me to see it. However, it is a huge file (2380 lines), and most of it filled with a pile of non-standard characters: diamonds, arabic (i think), cyrillic, diamonds, greek, etc etc. Basically, it looks encoded, and the majority of it is unreadable. It looks the same both in Seabass and through cat. I'm not sure it would even be postable in this forum. I can try if you think it's ok, but just giving fair warning.

Also to clarify, (because i misread your post about using wget), I have never successfully downloaded an mms message on this device. I can send fine, but have never successfully received an mms.

]]>https://forums.ubports.com/post/60885https://forums.ubports.com/post/60885Thu, 27 Jan 2022 03:15:31 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 02:32:17 GMT]]>@fizz said in MMS success and failure:

OK i was able to download the first one (with the "-1"). When i open it up in Seabass, there is nothing... it appears like a blank file. Though the file browser says it's 280 kb in size, and seems to think it's a movie (based on the icon). So not sure how to look at this.

I wonder if something in the address is an invalid character or something? Could you try this:

wget -O mms-download.txt <html address> (I just edited: I think you need -O BEFORE the url)

Then you should find mms-download.txt in your home directory. If seabass still shows it empty, can you try in the terminal to view it?

cat mms-download.txt

??

]]>https://forums.ubports.com/post/60884https://forums.ubports.com/post/60884Thu, 27 Jan 2022 02:32:17 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 02:20:52 GMT]]>@rik
From numtium... this is a test picture that my wife messaged me- as before i get the notification but it can't download it.

2022/01/26 20:44:16 Received ReceiveNotification() method call from 44600
2022/01/26 20:44:16 Push data
00000000  00 06 29 1f 22 61 70 70  6c 69 63 61 74 69 6f 6e  |..)."application|
00000010  2f 76 6e 64 2e 77 61 70  2e 6d 6d 73 2d 6d 65 73  |/vnd.wap.mms-mes|
00000020  73 61 67 65 00 81 84 af  84 8d 01 00 8c 82 98 36  |sage...........6|
00000030  32 37 66 34 39 39 35 61  34 66 30 36 39 38 61 63  |27f4995a4f0698ac|
00000040  30 35 66 36 30 35 31 2d  31 00 8d 92 89 1a 80 18  |05f6051-1.......|
00000050  ea 2b 31 35 31 39 38 35  39 30 35 34 37 2f 54 59  |.+15198590547/TY|
00000060  50 45 3d 50 4c 4d 4e 00  96 00 8a 80 88 05 81 03  |PE=PLMN.........|
00000070  09 3a 7f 86 81 83 68 74  74 70 3a 2f 2f 6d 6d 73  |.:....http://mms|
00000080  63 32 2e 67 65 74 2e 62  65 6c 6c 2e 63 61 2f 63  |c2.get.bell.ca/c|
00000090  6c 6f 75 64 6d 6d 73 63  3f 6c 3d 36 32 37 66 34  |loudmmsc?l=627f4|
000000a0  39 39 35 61 34 66 30 36  39 38 61 63 30 35 66 36  |995a4f0698ac05f6|
000000b0  30 35 31 2d 31 00 8e 03  04 b1 e8                 |051-1......|
2022/01/26 20:44:16 Trying to set Active property to true for context on true /ril_0/context2
2022/01/26 20:44:16 Download issues: org.freedesktop.DBus.Error.InvalidArgs: Invalid URL: ''
2022/01/26 20:44:16 Trying to set Active property to false for context on false /ril_0/context2
2022/01/26 20:45:12 Received unknown method call on org.ofono.mms.Message MarkRead
2022/01/26 20:45:12 Message /org/ofono/mms/302610917674682/d42593a258f304dfd1c4a1c2c5edda49 is not responded and not expired, not deleting.

And now working on the wget... stay tuned...

OK i was able to download the first one (with the "-1"). When i open it up in Seabass, there is nothing... it appears like a blank file. Though the file browser says it's 280 kb in size, and seems to think it's a movie (based on the icon). So not sure how to look at this.

I also tried downloading the second (no "-1") but i get a 404 not found error.

Oh, and i double-checked that wifi is totally disabled.

]]>https://forums.ubports.com/post/60883https://forums.ubports.com/post/60883Thu, 27 Jan 2022 02:20:52 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 01:34:37 GMT]]>@fizz said in MMS success and failure:

I'm happy to try this, but i don't understand what url i should use. In the numtium log i posted above, the only url i see if http://mms.bell.ca/mms/wapenc.

The http address is in your log as part of the "hex dump", but you are experiencing that error where it says Invalid URL: '' so that is this different bug that @StandUpMobile is indicating is tracked here: https://github.com/ubports/nuntium/issues/14

If I attempt to "piece together" the http address from the hex dump part of your message, it seems it is this: http://mmsc2.get.bell.ca/cloudmmsc?l=f95c4f5dbdc28f499f619d44-1

Can you try, with wifi DISCONNECTED, these possibilities from terminal?

  • best guess:
    wget http://mmsc2.get.bell.ca/cloudmmsc?l=f95c4f5dbdc28f499f619d44-1
  • removed -1 which may not be part of the address:
    wget http://mmsc2.get.bell.ca/cloudmmsc?l=f95c4f5dbdc28f499f619d44

But since this is several days old it may have been "cleaned out" by your carrier. So if you get "not found" on both of those try again to receive a MMS photo, putting together the new http address from nuntium.log like I did above, and then try it with wget.

Yes, this is quite a technical and fiddly process, but we may learn what character in that http address is causing nuntium to wipe out the address (leaving the Invalid URL: '' response). @StandUpMobile if you are willing you could try as well to see if there is any clue you can uncover that is causing this "Invalid URL" response.

]]>https://forums.ubports.com/post/60882https://forums.ubports.com/post/60882Thu, 27 Jan 2022 01:34:37 GMT<![CDATA[Reply to MMS success and failure on Thu, 27 Jan 2022 01:15:41 GMT]]>@rik said in MMS success and failure:

So, if you want to try again with wget (finding the http address of the failed download from Log Viewer in nuntium.log we can see if we can help you dig through how to identify the various phone numbers in it to manually create the group thread). In fact, try this process of wget on a MMS group message you successfully downloaded, then it may be more apparent how to read it. They shouldn't be blank, if so something else is causing confusion.

I'm happy to try this, but i don't understand what url i should use. In the numtium log i posted above, the only url i see if http://mms.bell.ca/mms/wapenc . When i try a wget on that i get a 405 error, method not allowed. So i presume i am missing something. What do i need to do?

-Fizz

]]>https://forums.ubports.com/post/60881https://forums.ubports.com/post/60881Thu, 27 Jan 2022 01:15:41 GMT