Development testers for Anbox
Johanno last edited by
I've tried it on BQ m10 FHD and it does not seem to work.
I've flashed the Kernel and installed anbox-tool but i can't install it, because it says the Kernel isn't installed.
phablet@ubuntu-phablet:~$ anbox-tool install Anbox kernel is not installed! Please flash this first! phablet@ubuntu-phablet:~$ anbox-tool status Kernel: NOT OK System: NOT FOUND Enabled: NO Running: NO
I tried reflashing it a couple of times, without success.
delijati last edited by
Can someone point me to the used kernel source for
baconanbox. The one in github seams not to have the "anbox" changes.
Ingo last edited by Ingo
Maybe this is useful feedback
These are the apps that work for me with anbox on Fairphone 2
- Threema (Polling instead of Push notifications)
- WhatsApp (probably also polling)
- my banking app
But please take note: I haven't tested those in depth and am not using them on my daily driver, so maybe some problems went unnoticed so far.
What didn't work
- AdAway (needs root)
- Bücherhallen (doesn't run without gapps; managing wish list works)
- car2go (doesn't run without gapps)
- DB Navigator (crashes immediately on start)
- Drive Now (doesn't run without gapps)
- Firefox (looks as if it works, but web pages are rendered entirely black)
- iButtons (simply doesn't start)
- Real Drum (simply doesn't start)
- Stadtrad (doesn't run without gapps)
- vlc (upper third of screen remains black, the app window seems shifted down and lower part is not visible)
rocky58 last edited by
@ingo also Telegram works
@ingo Thanks for your recommendation. The installation did work, but then a system update of UBports has detroyed my Fairphone. No, problem, it is a developer device. I was able to recover my Fairphone and install Anbox abein with the android tools as described on the documentation page: https://docs.ubports.com/en/latest/userguide/dailyuse/anbox.html
I could mange to install FDroid from a download and then Yalp Store within FDroid. Running Yalp Store seems to be to abitious. Yalp Store crashes while logging into the Play Store. So, in general Anbox is working on my Fairphone.
Sometimes the interaction with Android apps is liettle bit tricky because of the missing back navigation button on the system level. Alien Davlik adds a navigation bar with a back button. Maybe this could be an approach for Anbox either. The disadvantage would be a smaller screen.
I payed around with Google apps to check the system integration. It seems, that Anbox is completely isolated.
Does someone know, where I can find the storage for Anbox? I try to import an adressbook export in the related Android App.
greentree last edited by
@pawlinski try to use test image (anbox-boot-$CODENAME-test.img)
frapie last edited by
Hiya i just wanted to leave a link here. I accidentally started another thread. If you read into this link you'll find the instructions on how i installed Anbox on an OPO. So far successful. I just need some time to 'play' with it now to see where it is at and what can be done with it: https://forums.ubports.com/topic/2202/anbox-for-opo/7
BodoW last edited by
@marc_aurel Storage is in ~/anbox-data/data/media/0/
@bodow Thanks for the clear advice. Unfortunately I'm struggling with accessing the storage for Anbox.
I tried to copy my address-book to the Anbox container:
adb push contacts.vcf /home/phablet/anbox-data/data/media/0/ adb: error: failed to copy 'contacts.vcf' to '/home/phablet/anbox-data/data/media/0/': remote Permission denied contacts.vcf: 0 files pushed. 142.5 MB/s (720808 bytes in 0.005s)
I also can't access the media directory. I only can list the content of the data directory, but I can't switch to a subordinated directory.
phablet@ubuntu-phablet:~/anbox-data/data$ sudo ls -l [sudo] password for phablet: total 5136 drwx------ 2 root root 4096 Dec 13 18:20 adb drwxrwxr-x 2 system system 4096 Dec 13 18:20 anr ... drwxrwx--- 4 1023 1023 4096 Dec 13 18:20 media ... phablet@ubuntu-phablet:~/anbox-data/data$ cd media bash: cd: media: Permission denied phablet@ubuntu-phablet:~/anbox-data/data$ sudo cd media sudo: cd: command not found phablet@ubuntu-phablet:~/anbox-data/data$
I have a similar problem if I use the file manage on the device. But I also tried an
adb pushcommand within the device without success.
phablet@ubuntu-phablet:~/Downloads$ adb push contacts.vcf /data/sdcard/Download failed to copy 'contacts.vcf' to '/data/sdcard/Download': secure_mkdirs failed: Permission denied
matteo last edited by
@marc_aurel just my 2 cents here. Did you try, before to navigate into the anbox folder, to type
sudo suand gaining the root access?
Second hint: you could try to move first your contacts file to an accessible folder, as for example Documents or Downloads, with
adb pushfrom your PC and then, from the terminal on your PC, you could type
adb shell, since I found out the latter has some limitations in writing on the phone partition. In the end, you could just copy your file, maybe better with root privilege, to
Ingo last edited by
Someone suggested the following somewhere
mkdir -p /home/phablet/AnboxHome sudo chmod -R 777 /home/phablet/anbox-data/data/media/0 sudo mount --bind /home/phablet/anbox-data/data/media/0 /home/phablet/AnboxHome
But with the clear hint that making things 777 generally is not a good idea.
Of course the minimal way would be just the second line. The other are just there to have an easier/shorter path.
BodoW last edited by
@marc_aurel You're right. Sorry, I didn't have a shell open when I was writing my response and didn't remember that you had to "sudo su" or "sudo -i" first (as @matteo mentioned). I'd prefer this way as I would have a bad feeling about 777ing a directory permanently.
Besides that: Does it work now?
@bodow Thanks for the advice. The following approach works:
sudo su cp contacts.vcf /home/phablet/anbox-data/data/media/0/contacts.vcf
I resume. The system integration of Anbox seems to be very limited. The apps are shown in the app scope and the apps have hardware access with network and storage. I think, that's it.
It's possible to copy files with adb shell, but this is not for an average consumer.
It seems there is not service or data sharing. I haven't tested notifications, yet.
Guy last edited by
hi, i was trying use anbox on my nexus 5 device, and got
/bin/bash: pm: command not founderror, do you know this?
# install command ➜ Downloads adb install MobileAssistant_1.apk [100%] /data/local/tmp/MobileAssistant_1.apk /bin/bash: pm: command not found # adb shell infos root@ubuntu-phablet:~# dpkg -l | grep anbox ii anbox 8+0~20180916133012.39~1.gbpe34b59 armhf Container-based approach to boot a full Android system on a regular GNU/Linux system ii anbox-common 8+0~20180916133012.39~1.gbpe34b59 all Common files necessary for Anbox ii anbox-ubuntu-touch 8+0~20180916133012.39~1.gbpe34b59 all Files necessary for Ubuntu touch root@ubuntu-phablet:~# dpkg -l | grep android-tools-adb ii android-tools-adb 5.1.1r36+git20160323+ubports1+0~20181125103222.6~1.gbpc708bb armhf Android Debug Bridge CLI tool ii android-tools-adbd 5.1.1r36+git20160323+ubports1+0~20181125103222.6~1.gbpc708bb armhf Android Debug Bridge Phone Daemon root@ubuntu-phablet:~# anbox-tool status Kernel: OK System: OK Enabled: YES Running: YES
Ingo last edited by Ingo
Are you executing
adb install MobileAssistant_1.apkon your PC? That would explain the
pm: command not found.
You have to transfer the apk to the phone and do
adb install ...there (assuming you have installed adb on the phone first; which by the output of dpkg is the case).
Basically this: https://forums.ubports.com/post/14834
Guy last edited by
@ingo thanks for the reply, I have install the apk successed
@mariogrip Excuse me. How can I build this ：http://cdimage.ubports.com/anbox-images/android-armhf-64binder.img ?
I followed this step ： https://github.com/ubports/anbox/blob/xenial/docs/build-android.md and lunch anbox_armv7a_neon-userdebug
Using my built android.img can't work.
I still have a question, why use android-armhf-64binder.img instead of android-armhf-32binder.img
@mariogrip Excuse me. Can you share your local anbox project to build android-armhf-64binder.img ?
when i use https://github.com/ubports/anbox to build , There are a few differences：anbox-init.sh 、anboxd 、 netd
I want to test some of the applications we rely on. like : qq、weixin、etc.