Sony Xperia 10 (kirin)

tac

Ok,Thanks @hengyedev , but unfortunately the emma tool does not support the l4293 model for the Xperia 10 Plus.

HengYeDev

@tac Is there an error? Have you tried some other distributors of stock android 9 ROM?

tac

@hengyedev it just hangs or boot loops and tills me the software on your device is corrupt? I have been able to install lineage 17.1 on the device and sailfish os. Would a version of lineage os that is based on Android 9 work or does it have to be the Stock Android Rom?

HengYeDev

@tac It must be stock android 9 rom

zentrr

@golliath51 Hello.
Have you fixed the problem with the cellular connection?

zentrr

@hengyedev Good time of day.
I have a Sony I4113 does not work cellular connection.
How do I fix this?

Crockett1981

This post is deleted!

golliath51

@zentrr my cellular works with this modification:
by ssh or directly on your terminal
change your filesystem permission with

sudo mount -o remount,rw /

modify with vi le file /etc/ofono/ril_subscription.conf by

sudo vi /etc/ofono/ril_subscription.conf

[Settings]
#EmptyConfig=false
#Identity=radio:radio
#3GLTEHandover=true
#SetRadioCapability=auto

SetRadioCapability=off
emptyPinQuery=false
radioPowerCycle=false
confirmRadioPowerOn=false
useDataProfiles=true

[ril_0]
transport=binder:name=slot1
name=slot1

[ril_1]
transport=binder:name=slot2
name=slot2

and main.conf

sudo vi /etc/ofono/main.conf

[ModemManager]
AutoSelectDataSim=always

and reboot and phone

Flohack

@golliath51 main.conf had a bug, in the latest rootfs this change should not be necessary anymore

golliath51

After having tested twice, when I do above operation my bluetooth indicator disappears and I can't active my bluetooth.
Anyone have any idea of link between these conf files and bluetooth? Or how to reactivate my bluetooth.

haimeh

I have been playing around with the port on the I3223 and it is working pretty good! A few things I am still trying to get working, like access the phone with adb when booted into ubuntu-touch. It might be related to the other issue I'm looking into, that charging isn't working either. If you plug in the phone while off, it doesn't show a charge screen and instead just reboots. If you plug in the phone while on, it doesn't indicate that it is charging.
Also I found that the mod from golliath51 is also necessary for single sim 10 Plus models to use cellular, just omit the slot2 parts.

HengYeDev

@golliath51 To enable bluetooth:

sduo restart bluebinder

golliath51

@hengyedev it's works, thank you.
Do you have tested the bluetooth with headphone or car bluetooth. Because the sound works but the commands doenst work (next, vol+/-, play or ||)?
And you can add gps works in your port, i use all day. But the gps init is slow. May be the agps data doesnt work.

HengYeDev

@golliath51 Commands don't work for me neither. GPS is probably because there is no carrier acceleration in ubuntu touch.

golliath51

@hengyedev some MMS doesnt work and i can add only by files folder but no picture or camera folder. May be change the permitions?

golliath51

@hengyedev i have receive an update of UT by OTA. Have you tested? Is it works? How i install this update, in telegram he talk to UT recovery but it doenst work for me.

AdLinux

I seem to be having quite a different experience with the build than is stated at the start of this thread. So rather than making a million different posts, I have instead compiled a similar status list. I hope this can help the developer(s) to improve this port of Ubuntu Touch.

I am running a I3113 model in Britain (if that makes any difference). These results are only from a couple of days of running the OS.

Working
• Actors: Manual brightness
• Camera: Photo
• Camera: Switch between back and front camera
• Endurance: Battery lifetime > 24h from 100%
• GPU: Boot into UI
• Lights
• Misc: Battery percentage
• Misc: Offline charging
• Misc: Online charging
• Misc: Shutdown / Reboot
• Network: Flight mode
• Network: WiFi
• Sensors: Rotation
• Sensors: Touchscreen
• Sound: Earphones
• Sound: Loudspeaker
• Sound: Microphone
• Sound: Volume control
• Torch

Untested
• Endurance: No reboot needed for 1 week
• GPU: Hardware video decoding
• Misc: Reset to factory defaults
• Misc: RTC time is used after reboot
• Misc: SD card detection and access - only for devices that support it
• Network: Hotspot
• Sensors: GPS

Not Working
• Actors: Vibration
• Battery charging indicator
• Camera: Video
• Cellular: Carrier info, signal strength
• Cellular: Data connection
• Cellular: Incoming, outgoing calls
• Cellular: MMS in, out
• Cellular: PIN unlock
• Cellular: SMS in, out
• Cellular: Change audio routings
• Cellular: Voice in calls
• Network: Bluetooth
• Sensors: Automatic brightness
• Sensors: Fingerprint reader
• Battery indicator when charging
• Libertine
• USB: MTP access

It can't seem to detect my SIM card (which is working, as I have tested the SIM in other phones). Could anyone help me to get the phone to recognise the SIM card, I'm not actually sure how to get to SIM settings, and only know that it doesn't detect it from the Phone app.

I hope this information helps!

HengYeDev

@adlinux try goliath51's config change to get SIM working.

HengYeDev

@golliath51 there's no android9 recovery for this device currently.

AdLinux

@hengyedev Thanks, I'll give it a go!

I do have another question though: When I followed the initial installation guide you posted (it was very useful by the way, thank you) you said to flash the latest flashable artefacts. I chose to flash the one numbered as #1012205941 as it is the latest one that is just labelled 'flashable'.

However, there do appear to be more recent versions. I just wanted to ask what some of the terms used mean.

The latest version as of today is #1033922516, which is labelled as 'devel-flashable_mermaid'. I assume 'devel' is short for 'development', but what are you referring to when you say 'mermaid'? Or 'pioneer'? Which I have seen in other builds?