Port to Oneplus 2

SGCMarkus

@Maxximo88 know that, already running on my phone
kernel does the same thing with and without multirom injection though (after i select the rom to boot, aka ubuntu)

But, i just remember now, i can save a Kernel Log in Multirom... but i doubt it will give me anything important at that stage yet

SGCMarkus

@UniSuperBox are the 16.04 and/or the 17.04 builds of ubuntu touch "stable" (or atleast do they boot on already working devices)?
And do you know where the LXC container will be started? Maybe an architecture problem, like an incompatibility between the 64 bit kernel/android image, and the 32 bit vivid image (which i used so far).
Friend of mine meant it could work with modifying the parameters how the LXC container gets created, if its a architecture problem (and im currently downloading both xenial and zesty builds)

UniSuperBox

@SGCMarkus Those builds are not stable. I'd recommend using the 15.04 rootfs.

SGCMarkus

@UniSuperBox

found https://hastebin.com/wegibubuqu.go this today in the lxc config of the 15.04 rootfs, if i understand that correctly, it tries to load the LXC container, which is ARM64 for the Oneplus 2, as a armhf, which ofcourse doesnt work... maybe thats the problem? (or one of those)

UniSuperBox

@SGCMarkus It's possible that it's the problem, but I'm not really sure how you'd fix it. ADB not starting would indicate a much different problem, in any case.

SGCMarkus

im back from the "dead"
didnt have that much free time, but now i can work on it again lol
have set up a "new" machine, this time ubuntu native installed on my PC, instead of running in a VM (instead of ~45min build time its only 16 min now )

Also noticed a few updates in the wiki, for example how to build for bullhead, and it says to use the Yakkety image, instead of the Vivid one. Does anyone have that backed up somewhere, everything i find about the Yakkety image is down, either sents me to Zesty (and idk how stable that one is). Or should i (try to use) Xenial?

Or maybe theres "in general" any news on this whole topic that i migth have missed?

nyl

Hi why not use hybris for the port? you can fork my sources for adapted kernel

https://wiki.ubports.com/wiki/Building-libhybris

You can find my sources here:
https://github.com/nyl

UniSuperBox

@SGCMarkus Welcome back!

You've missed a lot since you were last here. And by a lot, I mean a lot. Canonical dropped Ubuntu Touch about two months ago and we have taken over the OS. If you'd like a quick summary of what's happened since then, you might want to check out the blog starting on April 8th.

SGCMarkus

damn, its been a looong time since i was last here, had more to do than i thought i had.

But.. Im back at working on this
I switched to the Halium 7.1 base atm, as I saw someone got it running for the Nexus 7.
I can say, it fully compiles without errors. The recovery hybris-boot image (bootmode=debug) works too, i have access via telnet, but otherwise... it just reboot after i think it tries to load something... cant say that, dont have a last_kmsg... for some reason thats nowhere found, on any ROM I've tried so far.

@nyl sorry for the late reply about this (also saw your SailfishOS project on xda a while ago).
I tried to follow those instructions for the libhybris. Appearantly the autogen script works without problems, but afterwards the instructions say i should run make in that folder, but make says theres nothing for it to do.

SGCMarkus

I managed to create a Ubuntu Zesty rootfs (actually supported arm64 instead of xenial), and now im having a really really weird behavior

if i flash the hybris-boot.img i get this in the console

markus@markus-pc:~$ lsusb -vd 0fce: | grep -i serial
iSerial 3 1ee3fc01

but, also sometimes a "charging ??/100" flashes up on the screen (rest is always black), and sometimes the LED starts to light green.
The USB Tethering seems to not fire up completly though, atleast i dont get any connection via anything to it.
The debug mode works still though.

nyl

could be permissions related issue on the compiled files

absint0o

WOW! I'm really glad there are some people not only continuing the amazing Ubuntu touch OS but are also developing it for the OnePlus 2!!! Keep up with the good work! As soon as it works I want to be the first to try!!!