Bug two sim cards only one is working perfect
-
@fp2andfp3-user did it automatically reboot at some point? Maybe once after flashing?
Do you know which channel (A or B ) you flashed? -
@luksus tried again and download image again....I haven checked channel A or B, no automatically reboot....wait
-
@fp2andfp3-user I am asking because in case of an error, the phone may switch automatically to the other channel and there it will not boot, if it is not flashed with a proper boot and systemimage...
So what you can do to get sure, is:
- check active channel:
fastboot getvar slot-active:a- if A is active, then it should print "yes", else B is active
- set active / switch channel:
fastboot --set-active=a - you can flash the desired channel:
fastboot flash system_a system.imgfastboot flash boot_a boot.img
- check active channel:
-
@fp2andfp3-user 10 Minutes I see only bootlogo.... I will try with set channel to a
-
@fp2andfp3-user It shows me now channel a but i try flashing again with boot_a und system_a
-
@fp2andfp3-user shall I try channel b? I think it will stop again by the fp3 logo....I will wait a little bit
-
@fp2andfp3-user in the end, it does not matter which channel you flash.
It is just important that you boot the channel you just flashed...So if nothing helps, try to flash the stock system image first and then again the ubports system image (no need to reboot in between).
-
@luksus what is the stock image? Older Images will boot its no problem. No Chance I see only FP3 logo
-
@fp2andfp3-user I mean the system.img from the stock android 9 system.
But if older images boot, that seems not neccesary...If it is stuck on the Fairphone logo, could you get an ssh connection with
ssh phablet@10.15.19.82?And can you please verify that it not says "Failed" at the last "flash part" (the system image is flashed in ~520MB parts)?
-
@luksus ssh is not working when I see the logo.
I flashed with -S 300MB and it told me OKAY finished total time134s
-
@fp2andfp3-user the older one no problem...I'm back on the image 6 days ago
-
@fp2andfp3-user hm, then I have currently no idea...
-
@luksus I will wait for the next image and try again. No problem. Thanks
-
@fp2andfp3-user I don't understand, your new images is also not flashable for me....all older images are okay... I tried with ubuntu and with windows 10 no chance...damm
-
Hi, first thanks for the FP3 port, really nice to have it since a long time.
i have exactly the same Problem. The last build which is working is the one from 24.01. Newer Builds do not boot any more (no access with adb/ssh). Any information i can provide to find the root case?
-
@weiti @FP2andFP3-User
I also don't know whats going on... for me it is still working.
Can you please try this artifacts, which I build on my homeserver: https://drive.google.com/file/d/1Rua6Soc2OyHh5HibaFz1lYS-tBoRtpx3/view?usp=sharingIf this also does not work, I can only suggest you to flash the stock android rom A.0111 with this tool: https://github.com/p1gp1g/fp3_flash_stock.
Your data partition should be stay untouched in this case, so you don't have to be worry about loosing data (normally).After flashing the stock rom, you don't need to boot android.
Just flash again the ubports images. -
@luksus you have to give US access in googledrive, then we can test it. Thanks
-
@luksus shall we flash on both slots or only on one?
-
@fp2andfp3-user Does the link work now?
To be safe you could flash both slots. But this is not needed.
So if you can keep the overview on which slot you are operating, it is up to you ... -
@luksus link is running......thanks
