Wrong architecture reported while installing click packages
-
@totalrando If you are up to it I think this is the location of the files for the 6T to compile a newer version.
https://gitlab.com/ubports/community-ports/android9/oneplus-6Also I looked through the repo the other day and it looks like it is 64 bit so maybe someone noticed it was wrong and fixed it or I am misinterpreting the files or it is completely a different branch and has nothing to do with the GSI we have been testing.
Either way that link is to the official UBports gitlab community builds section so it is likely a good place to start.
-
@antidroid Oh, well this answers the question then. If I remember correctly with the user name here that would mean @calebccff is the developer listed on GitLab. Ok. So now we can all put our heads together to figure out how to switch that up. It also explains why I don't see the fajita stuff on Github. Now I don't have to add documentation and all that nightmarish stuff on GitHub.
He's actually often on the Discord channel. Maybe I can just ask there.
-
@totalrando Well he is the one busy doing all kinds of stuff with the 6 and 6T. He is the one mainlining the kernel, porting to sailfish, postmarket OS, manjaro and others. The other day he got the mainline linux kernel to boot on an iPod original. So he does push things to a lot of repos but I do not think he controls them.
I check up on his progress often.
https://gitlab.com/users/calebccff/activity
https://twitter.com/calebccffOnePlus One with UT OTA-15 daily driver. I would be testing the Halium 7.1 port if I could roll back to OTA-15
OnePlus 6T PostmarketOS Custom Gnome on Mainline Kernel -
@antidroid I just asked about why the mix on Discord. There may well be a reason we're unaware of and if that's the case we're just going to have to start building on the port
-
@totalrando OK not gonna lie I have never been inside a phone's image files and basically have never done this, so I have a feeling I am going to staring at this with a blank look for at least a few hours. This is way above my pay grade but I am going to work backwards and start at the beginning. This is going to be a while.
-
@antidroid see, I'm really the wrong person for this.
I am looking at this and the other OTA file that I presume build rootfs.
But it looks like it's pulling from arm64 folders. I have no idea what would cause it to pull 32-bit rootfs and I'm not familiar enough with the directories to even guess.
-
@totalrando That is basically where I left off. I think I am similar to you, I can code and do so as a hobby but most of this is a huge learning curve.
Like most opensource projects UT lacks current complete documentation. I do not blame the devs, I would rather they spend their time coding the OS then spending their time writing documentation that can change daily. I just wish when they would answer questions in a public setting that is indexed and searchable via your favourite search engine rather than only in private chats and servers that are not indexed or publicly searchable without signing up. It would allow people to find the info and help the project rather than look, fail to find the information, give up and complain.
-
@antidroid I think I found something, and you're better at this than me. But it appears on another device that the same problem existed-- but that rootfs itself can be upgraded. Don't know how personally, because this is all still new to me.
If that helps let us know. I am not good enough to know what to do with it.
-
@totalrando Okay from there I followed the information to these possibly helpful things.
The UBports Jenkins continuous integration server edge builds for Hybris Arm64 devices.
https://ci.ubports.com/job/xenial-hybris-edge-rootfs-arm64/
Although it says edge it has permalinks to builds labeled stable the latest successful builds are from 3 hours ago.My guess is you would take the latest image from above and apply and device specific changes found https://gitlab.com/ubports/community-ports/android9/oneplus-6/oneplus-enchilada-fajita to have the latest image to flash.
In the LG thread it linked to where the OP had posted their instructions https://forum.xda-developers.com/t/ubuntu-touch-wip-lgv20-h918-twrp-zip-install.4002579/ which seems to imply you could simply flash the device specific image to the device the same way we flashed the current file system via TWRP.
All of this is just me thinking out-loud and I could be on the wrong path.
EDIT:
I opened the flashable image to compare the the Jenkins server image and after doing the device specific modifications you would still have to build the binary .img for flashing.
OnePlus One with UT OTA-15 daily driver. I would be testing the Halium 7.1 port if I could roll back to OTA-15
OnePlus 6T PostmarketOS Custom Gnome on Mainline Kernel -
@antidroid It sounds good to me and a wrong path is better than no path. Curious to see what comes of it.
-
@antidroid Got an update from Caleb on the Discord; he says the new images are using the 64-bit rootfs and pointed me to the link to the gitlab.
EDIT: I think they've been updating this over the past few days so I am going to try to reflash the phone.
-
@totalrando Which repo? This one because the UBports one hasn't been updated in a month. It doesn't have any branches either. The last pull request on the github one is from me fixing the documentation weeks ago.
Did he explain how to build it? Do we just change the names in the deviceinfo file to fajita and run ./build.sh
-
@antidroid said in Wrong architecture reported while installing click packages:
Did he explain how to build it? Do we just change the names in the deviceinfo file to fajita and run ./build.sh
asking, let's see what he says
-
@totalrando While we wait I downloaded that repo, ran
grep -rn enchiladato find all the files with references to enchilada and then changed all of those to fajita. I tried running ./build.sh but it failed because it needs a fajita_defconfig which it could not fetch. I changed that back to enchilada_config and I am running ./build.sh again. It is busy at work. I'll let you know how it turns out. It could take a long time.
-
@antidroid He said it only builds in CI. I assume he's referring to this but I don't know how to use it. https://gitlab.com/ubports/community-ports/android9/oneplus-6/oneplus-enchilada-fajita/-/blob/master/.gitlab-ci.yml
That looks complicated, will learn more in the documentation tomorrow. It's making phone calls right now so I will work on it in a bit.
EDIT: found the CI documentation https://docs.gitlab.com/ee/ci/quick_start/
-
@totalrando Thanks for the info. After looking at the gitlab-ci.yml I see the build.sh is the first step and I was missing some dependencies so I killed the build. At this point it looks like we are best to just wait for the next release.
I had basically given up on figuring it out weeks ago. I am also a little more interested in Postmarket on the 6T. The idea of running mainline is why I choose the 6T over other UT development phones like the 5T. The neat thing is with Lomiri on postmarket you could have a highend mainline Linux phone that looks and feels like Ubuntu Touch but has more traditional software available. I am not against UT though and until Postmarket on the 6T can use the cellular modem I will run UT as a daily driver once we get a more up to date version. Until then I will stick with UT on my OPO as a daily driver.
-
@antidroid We'll probably have to part ways on this one. This FAJITA is what I've always dreamed of in a phone. And I want it to work now. I'm willing to learn more and go down the rabbit hole to make it work.
Imma try building it in CI even if I don't know what I am doing. I feel attached to this phone.
Maybe I'm weird, but I'm kind of attached to this now. So I will go the harder route. I get not doing that-- I almost moved the SIM back to the Nexus 4-- but I feel inspired to try. If a half-baked split 32/64 worked this well, I just have to know! Anyway, I'll keep us all updated if I do anything productive.
-
@totalrando Please keep everyone informed of the progress and if you do figure it out could you please make a new post to the effect of "How to build from community port server" or some such thing.
I am following @calebccff brand new today video tutorial on building Postmarket from source. It is sooooo easy. I am building it with gnome 3 desktop to test. I will likely try a few of the desktops available. Currently Lomiri is not one of the ones selectable from the build script.
fbkeyboard: Plain framebuffer console with touchscreen keyboard support gnome: (Wayland) Gnome Shell i3wm: (X11) Tiling WM (keyboard required) kodi: (Wayland) 10-foot UI useful on TV's mate: (X11) MATE Desktop Environment, fork of GNOME2 (stylus recommended) phosh: (Wayland) Mobile UI developed for the Librem 5 (works only with numeric passwords!) plasma-bigscreen: (Wayland) 10-feet variant of Plasma, made for big screen TVs plasma-desktop: (X11/Wayland) KDE Desktop Environment (works well with tablets) plasma-mobile: (Wayland) Mobile variant of KDE Plasma (does not run without hardware acceleration, allows only numeric passwords!) shelli: Plain console with touchscreen gesture support sway: (Wayland) Tiling WM, drop-in replacement for i3wm (DOES NOT RUN WITHOUT HW ACCELERATION!) sxmo: (X11) Simple X Mobile: Mobile environment based on simple & suckless software (best compatibility on pinephone) -
Well, the point of CI is that it builds for you
The architecture thingie is caused by the GSI, the CI version doesn't have these issues.
