Lenovo Tab M10 HD Wifi X306F
-
@rubencarneiro Hi thanks for the port.
I have tried it on the wifi only 2Gb 32Gb model and it went into a boot loop.
Partitioning userdata to EXT4 gave this output:
terminating with uncaught exception of type std::out_of_range
This I assume the format to EXT4 failed so when setting up it failed to either find a user data partition or couldn't write to it, so boot looped.
Recovered the tablet with the crappy Lenovo Recovery tool, which locked the boot loader, so the tablet is functional at least.
Apart from that, the attempt (s) at install went as I would expect.
I will keep an eye out for the 4Gb 64Gb version and try again when I can.
-
@rubencarneiro Hi, got hold of a 4Gb 64Gb version of the device. Followed the readme and it seems to install fine. I used the binary fastboot version as described and all seemed to install OK.
Give it a few minutes to finish off and reboot. The device goes into a reboot loop.
Did you use a Windows or Linux machine?
-
Ha, finally got it working..... Very nice so far.
Two points, many thanks to @rubencarneiro for the port and for updating the Readme which I noted a requirement of Android 11. The other point and this should be a given, it requires the bootloader unlocking. I used windows 11 and powershell and had to use:
./fastboot flashing unlock
It does open up in desktop mode, but that can be switched off.
It won't work on the 2Gb 32Gb version as there is no Android 11 for that yet, but I am looking and will let you all know.
Edit: the 2Gb 32Gb tablet is not on Lenovo's upgrade matrix to Android 11. You will need the 4Gb 64Gb tablet to run UT!
-
@MrT10001 said in Lenovo Tab M10 HD Wifi X306F:
Ha, finally got it working..... Very nice so far.
[...]Hi,
is it the one with item model number ZA6W0066SE?TIA
-
@muskist It is ZA6W0137GB - I thnk GB is the Country designation.
-
@rubencarneiro said in Lenovo Tab M10 HD Wifi X306F:
Hi all, there are builds for testing avaible at https://gitlab.com/ubports/porting/community-ports/android11/lenovo-tab-m10-hd/lenovo-m10-hd/-/pipelines/1092432681
Hi,
could you please specify the device? Is it ZA6W...?TIA
-
@muskist You need the 4Gb 64Gb version, the 2GB 32Gb version won't work - I have tried.
-
@MrT10001
I know... But if I do puchase one I want it to be the right one. I mean 2nd gen not 3rd etc. Therefore I'd like to know the item number. -
@muskist Look for the as above Lenovo Tab M10 HD Wifi TB-X306F 4Gb RAM 64Gb Storage.
The other number should read ZA6W0XXXGB or SE. In bold are the important parts and they are on the box.
-
Hello Dear @rubencarneiro, Dear @muskist and other UT Friends
15.1). Dear @rubencarneiro, Congratulations and thank you very much for this Wonderful Port and for your Great Effort!
15.2). Dear Friends, would you be so kind to confirm, if these two Lenovo Tab M10 HD models would be good for the installation, please?
15.3). https://psref.lenovo.com/Detail/Lenovo Tablets/Tab_M10_HD_2nd_Gen?M=ZA6V0012PL
15.4). https://psref.lenovo.com/Detail/Lenovo Tablets/Tab_M10_HD_2nd_Gen?M=ZA6V0117PL
Thanks and regards~~ Piotrek~~pe3no.
-
@pe3noATo2DOTpl The TB-X306X has a 4G modem for data. The specs are the same when comparing the TB-X306F v the TB-X306X apart from the modem. It may or may not work. What I do know is that the:
TB-X306F 4Gb RAM and 64Gb Storage works and works well.
TB-X306F 2Gb RAM and 32Gb Storage does not work due to no Android 11 for this device.
If I had a TB-X306X 4Gb/64Gb to hand I would try it, but I do not, so cannot recommend that path
until I get more knowledge.(Apologies, I keep using ROM to mean eMMC storage, manufacturers call it "internal memory")
-
@davidj Hi the device is now in the installer you can use the UBports Installer
-
@pe3noATo2DOTpl TB-X306X is not supported, it will brick the device. only TB-X306F
-
@MrT10001 said in Lenovo Tab M10 HD Wifi X306F:
TB-X306F 2Gb RAM and 32Gb Storage
OK, now I read this
My tablet is now bricked but not dead (it shows "Product: MT65xx Preloader"). Has anyone recovered it? I believe the installer should have warned me.
Thank you in advance
-
@rapto what tablets are you installing to. The tablet should be the TB-X306F. It won't work on any others for this Ubuntu Touch port.
Xiaomi Redmi Note 7.... And more...
I have too many devices... -
@rapto said in Lenovo Tab M10 HD Wifi X306F:
I believe the installer should have warned me.
I believe you must have clicked through at least one warning before the installer tried to do as you asked it to.
-
@MrT10001 It is a TB-X306F, but the 2GB Android 10 version. The installer recognised it (but made no further check about ram or Android version).
I flashed Android 11 onto it, which seemed to work, and then installed UT. Almost everything seems to work, although sometimes not fluently, but the sound is not working at all. I have to try with usb audio or bt audio. It might be that the audio hardware got upgraded for the Android 11 models and the drivers don't understand the old hardware. I would have to re-flash Android 11 to check if sound works on Android 11. It worked fine on Android 10.
-
@rapto Where did you get Android 11 for the tablet?
-
@MrT10001 you can download the firmware from https://github.com/rubencarneiro/amar_row_wifi/releases/download/1.0/Firmware.tar.xz
-
@rubencarneiro Thank you. Something to try out later.
