Oneplus 3/3T
-
I was able to get it to install now, not sure I could reproduce.
-
Happy to report successful installation to edge channel on OP3T via ubp installer 0.4.6-beta! I look forward to trying this phone alongside my daily driver BQ E4.5.
Just for the record, I was not intending to run the installer again but I was playing with the phone (not connected to laptop) and trying to get to the Android Recovery screen because of being unable to get the phone to boot into anything at all
In all previous attempts at pressing vol up & power a different screen would come up: offering Fastboot and other options. On selecting say, Recovery, another screen would come up saying 'untrusted device; oem unlocked' and would prompt a button press which would open yet another window offering similar options, ie restart,recovery, pwr off etc. Difficult to remember precise steps but quite often nothing would happen apart from going back and forwards between these two screens. Turning off the device seemed to be all that would work. Previously the Android Recovery screen only presented when connected to and running the installer.
However, by constantly selecting recovery on both of these screens by about the fourth or fifth cycle the Android recovery screen presented itself. EDIT: Selected 'Android Actions' and 'Factory Reset'. Ultimately failed with an error...something to do with fstab. This looked promising enough for me to get out of bed and hook the phone up to the installer...where I noticed a new version. First run almost worked. Second run did the trick.
Happy Days. I knew it would work out eventually, but this quickly was a surprise indeed! Well done you masters of magic at ubports!! Onward and upwards!!
-
Hi all!
Following advice from @banderson5586:
- flashed TWRP to recovery partition using fastboot
'fastboot flash recovery <twrp.img>
where twrp.img was downloaded from https://twrp.me/oneplus/oneplusthree.html - rebooted phone if 'recovery' mode and then using UI of TWRP I did the following
- fixed 'cache' partition
- fixed 'data' partition
- formatted and fixed 'system' partition
- after that installation with ubports-installer v.0.4.6 could be finished successfully.
Now all seem to work finally!
Important step was to format and fix the 'system' partition, before I did that, only fixing 'cache' and 'data' partition did not help - installation always stalled somewhere in the middle of 'sending' phase, when Ubuntu OS is supposed to be flashed on the device. After doing manipulations with 'system' partition, finally all finished successfully.
Thank you everybody for your comments and shared experience! And special thanks to UBPorts developers who make it all possible in the first place!
- flashed TWRP to recovery partition using fastboot
-
It seem to run fine, runs better than my nexus 5 because media files actually work.
How did you get anbox running?
Is there any way to get the open-store installed? -
@bsdfreak Can you download it from here and install from command line?
https://open-store.io/app/openstore.openstore-teamclick install openstore.openstore-team_2.81_armhf.clickor whatever version you download
-
@joe doesn't work when it fails because i use arm64.
-
@bsdfreak Right. That's unfortunate. I guess it can be repackaged for arm64 at some point:
[EDIT] https://gitlab.com/theopenstore/openstore-app/merge_requests/41 -
@joe than i wait for the merge to happen. at least the basic apps seem to work fine. typing this on my oneplus 3. I imagine the openstore will come with a ut update?
-
Some testing:
- the keyboard doesn't work when adding an account.
- notes app doesn't work and gives a blank screen
-
@bsdfreak Yes I had that when I installed it. I also had the double triple reboot until it kicked into shape and booted and boy was it fast. You can see here from a twitter video when I did it later last week it was very fast and really responsive.
twitter video
Regarding 64 bit apps I heard from @CiberSheep via twitter
"plain qml apps will work. Other apps need recompilation for target architecture. OpenStore is in the work for serving multiarch clicks." all of which is good new.I also tried to install open store but got error messages ...in fact lots of errors installing anything....but that will come. The main thing is that it works. Wifi etc ..mobile/ data needed a reboot again but over all. Job well done
-
@andybleaden you need to give in the allow-unauthorized to install with commandline
-
@bsdfreak oh cool thanks...did/does that make the OpenStore installation work? I remember this from previous earlier openstore installations before UBports really kicked in
-
@bsdfreak Hi! Could you please explain more specifically, what you mean by "give in the allow-unauthorized" ?
Thanks! -
@pglushkov On the old version I used from @OMGUbuntu here
I had to allow it in the terminal
pkcon install-local --allow-untrusted openstore.openstore-team_0.103_armhf.click
Not convinced that will still work or is the correct version.
-
@andybleaden said in Oneplus 3/3T:
@pglushkov On the old version I used from @OMGUbuntu here
I had to allow it in the terminal
pkcon install-local --allow-untrusted openstore.openstore-team_0.103_armhf.click
Not convinced that will still work or is the correct version.
Yes, thank you! I've tried that with the 'allow-untrusted' option and it did not work, ARM64 is still ARM64. But @bsdfreak mentioned some 'allow-unauthorized', so I was wondering if mb that is something different.
-
@pglushkov hmmmm yes fear that is correct over to you @bsdfreak
-
@andybleaden i mentioned it out of the top of my head and it is untrusted not unauthorized. Just checked it.
-
@andybleaden I tried recompiling an app for arm64, but it still crashed on run.
Anyone know how to uninstall clicks from commandline? I can't seem to find the right package name.
-
@joe Used to be
sudo click unregister --user=phablet PACKAGE-NAME
or hold and long press on the app if it is in the dash
-
Definitely sweet dreams are made of this... XD
