Oneplus 3/3T
-
@Kyrylo looks like that not all partitons are ext4. May be a clean start with the device can help you. It gives you best chance to do it.
- start with twrp (fastboot boot twrp)
- set twrp to adb sideload mode
- adb sideload the latest oxygenos 9.0.6 from oneplus support page
- start the phone and make initial setup of the os
- after that 'fastboot boot twrp' again
- 1st. wipe all partitions
- 2nd select wipe advanced 'change filesystem' of cache, system and data and set it to ext4
- 3rd wipe format data
- check with twrp terminal command 'mount' that all partitions are ext4. If not change filesystem again.
- connect device to usb (still in twrp) and start ubport-installer
But this is not an op3 specific question!
-
@gischpelino Thank You for your respond.
Already did that all a couple of times.
Wiped all partitions, formatted to ext4, checked if formatted in ext4,
(If I am not mistaken no need to install Oxygen OS to wipe all partitions in TWRP once more)
1.Tried to install with BOOTSTRAP ckeckbox enabled and disabled.
Without results.
2.Pushed all that files to /cache/recovery/ (I am not sure if it is right place).
Rebooted to recovery and ... nothing happens.
So...
Any help will be appreciated. -
@Kyrylo may be a firmware problem, thats what the step with oxygenos 9.0.6 is for. As far as I can read you did not do all steps.
-
Do you mean twrp problem?
Or you mean that I should install OOS9.0.6 then to flash again in twrp? -
Can anyone please make a video about current progress of this device as i want to buy a new oneplus 3t i just wanna know its worth it or not?
-
@Specsx As a start you can refer to : https://devices.ubuntu-touch.io/device/oneplus3t/
-
@Specsx
I made a video for the OnePlus 3:
https://www.youtube.com/watch?v=cYvLqPPf3q4Not the same as OnePlus 3t, but pretty close...
-
@joe
Just wanted to say thank you for taking the time to make that video. It is a very comprehensive and objective one on the current status of the Oneplus 3/3T, excellent job! -
@3T_Ed Thanks. Glad it was helpful.
-
@gischpelino said in Oneplus 3/3T:
@Kyrylo looks like that not all partitons are ext4. May be a clean start with the device can help you. It gives you best chance to do it.
- start with twrp (fastboot boot twrp)
- set twrp to adb sideload mode
- adb sideload the latest oxygenos 9.0.6 from oneplus support page
- start the phone and make initial setup of the os
- after that 'fastboot boot twrp' again
- 1st. wipe all partitions
- 2nd select wipe advanced 'change filesystem' of cache, system and data and set it to ext4
- 3rd wipe format data
- check with twrp terminal command 'mount' that all partitions are ext4. If not change filesystem again.
- connect device to usb (still in twrp) and start ubport-installer
But this is not an op3 specific question!
Hey, just wanted to say thank you as this helped me get past an error during the automatic installer.
-
Hi!
I have a question about USB tethering on Oneplus 3.
Internet connection works well.In terminal I've entered commands:
$ android-gadget-service enable rndis
rndis enabled
$ sudo tethering enable
Device "rndis0" does not exist.
Error: Connection 'tethering does not exists.Does it work at all?
Or it's a bug.
Where I should report a bug?(additional question)
Thanks in advance. -
@Kyrylo i have the Oneplus 3t and it works for me; it doesn't always show the tethering icon up top though, so it looks like it's not working maybe that's your issue?
-
@soupbowl nice to hear that. Enjoy.
-
@vince1171 said in Oneplus 3/3T:
This is a port of Ubuntu Touch for the Oneplus 3 and the Oneplus 3T.
I want to use UBports as daily driver. Which will be better Oneplus 3T or Sony Xperia X if I need tethering from time to time. Will tethering and video recoording will be implemented soon?
-
@thilov How does the Aquarus M3 run? I know it's made for that...
Not sure if it works in USA though.
-
@Nathan123 said in Oneplus 3/3T:
@thilov How does the Aquarus M3 run? I know it's made for that...
Not sure if it works in USA though.
Aquarus M3? Don't know what that is. Sry.
-
Wondering if there's any news about the qtUbuntu camera for OPO 3T. I know it's a known and long standing issue and is worked on . I'm aware that GSstreaming app is considered to be an alternative, yet would rather use the native app.
-
on my Oneplus 3 the bluetooth connection with my old pebble watch lasts only about 10sec and then it's disconnected again...
and wifi is still unreliable, after a reboot the smartphone sometimes does not connect to my network - so I have to stop and start wifi and then it works
and I'd love to use the fingerprint reader in the future
I'm on Ubuntu 16.04 (2020-06-10) -
@strutter66 I had the same issue with my pebble time. I unpaired the devices and completely started again. The result is that my pebble works well but I am still unable to dismiss notifications.
-
I have tested music (no suspend was set) over bt Speaker:
If the wifi is on the music has many clicking noises and sometimes the wifi connection was lost for short. If the phone was connected to a repeater the connection was lost permanently. Strange, had to reenter credentials.
Switching off wifi the music plays without clicking noises over bt.
Using a headphone (cable, no bt) I had no problems with the music and the wifi.
It looks like bt and wifi having problems to work at the same time. I remember I read years ago, that op3(t) has a rome chip and that there are similar problems, have no source to cite, but maybe I read it for a sailfishos port (hope one developer has time and knowledge to investigate).