Testing the upgrade to Qt 5.12

danqo6

In battery settings in system-settings app after selecting time from 'sleep when idle' app crashes, short log:

file:///usr/share/ubuntu/settings/system/qml-plugins/battery/SleepValues.qml:59: TypeError: Cannot call method 'indexOf' of undefined

file:///usr/lib/aarch64-linux-gnu/qt5/qml/Ubuntu/Components/ListItems/1.3/ItemSelector.qml:257:13: QML ListView: Binding loop detected for property "itemHeight"

lduboeuf

@dobey
BQ 4.5: Got a crash at startup for sfxr: https://paste.ubuntu.com/p/khrnt9xc2R/
Crash also for Teleport, messaging app
Blank page for Dekko

Note that in the drawer, i have only 2 app icon columns (scaling 12 in UTTT) and distorted spash icons on several apps.

CiberSheep

On E5HD I got a couple of issues:

I'm pretty sure this is because I have been testing some PR but nothing was installed when I checked with ubports-qa list

The following packages will be DOWNGRADED:
  messaging-app

Unpacking libqt5webenginecore5:armhf (5.14.2+dfsg1-2~ubports2) over (5.14.2+dfsg-2ubports0) ...
dpkg: error processing archive /var/cache/apt/archives/libqt5webenginecore5_5.14.2+dfsg1-2~ubports2_armhf.deb (--unpack):
 cannot copy extracted data for './usr/lib/arm-linux-gnueabihf/libQt5WebEngineCore.so.5.14.2' to '/usr/lib/arm-linux-gnueabihf/libQt5WebEngineCore.so.5.14.2.dpkg-new': failed to write (No space left on device)

Unpacking liboxideqtcore0:armhf (1.19.8-ubports2.2) over (1.19.8-ubports2) ...
dpkg: error processing archive /var/cache/apt/archives/liboxideqtcore0_1.19.8-ubports2.2_armhf.deb (--unpack):
 cannot copy extracted data for './usr/lib/arm-linux-gnueabihf/libOxideQtCore.so.0' to '/usr/lib/arm-linux-gnueabihf/libOxideQtCore.so.0.dpkg-new': failed to write (No space left on device)

Full log (except the download messages):
https://paste.ubuntu.com/p/NbS3BtFTsv/

dobey

@danqo6 Thanks. I've pushed the fix for this and the SwitchDelegate issue in qqc2-suru, so those should all be good now after an update.

dobey

@CiberSheep Seems there was a change in messaging-app yesterday for OTA-13, which I've pulled in now, so should be included in the update as well.

Otherwise though, is your rootfs full? Did you already install some other things extra in it perhaps from Ubuntu archive?

arubislander

Wow, I come back to find everything I intended to report already reported! It isbgreat to see the community come together like this.

@dobey said in Testing the upgrade to Qt 5.12:

I've pulled in now, so should be included in the update as well.

How should one go about acquiring the updated packages? Just repeat the process in the original post?

dobey

@lduboeuf said in Testing the upgrade to Qt 5.12:

BQ 4.5: Got a crash at startup for sfxr: https://paste.ubuntu.com/p/khrnt9xc2R/

The app crashed? Or the shell? Sfxr seems to work mostly fine on my Nexus 4, though I have noticed a couple issues with the app itself (and I think unrelated to Qt 5.12).

Crash also for Teleport, messaging app

Again, are the apps crashing, or the shell?

Note that in the drawer, i have only 2 app icon columns (scaling 12 in UTTT) and distorted spash icons on several apps.

Yeah, there seems to be something up with the app drawer column math it seems. Not sure what though, since I'm pretty sure it is untouched.

dobey

@arubislander said in Testing the upgrade to Qt 5.12:

How should one go about acquiring the updated packages? Just repeat the process in the original post?

Mostly. Just do sudo ubports-qa update instead I think (or just sudo apt-get update && sudo apt-get upgrade after doing the mount commands).

lduboeuf

@dobey said in Testing the upgrade to Qt 5.12:

The app crashed? Or the shell? Sfxr seems to work mostly fine on my Nexus 4, though I have noticed a couple issues with the app itself (and I think unrelated to Qt 5.12).

Yes the app crashed. What do you mean by shell, Lomiri crash and reboot ?

dobey

@lduboeuf Yes.

danqo6

@dobey I made fix for missing images in checkindicator and spinbox, look https://github.com/ubports/qqc2-suru-style/pull/48/files

CiberSheep

@dobey said in Testing the upgrade to Qt 5.12:

Otherwise though, is your rootfs full? Did you already install some other things extra in it perhaps from Ubuntu archive?

I'll install a fresh image and try again to be sure

lduboeuf

@dobey

So, sfxr, messaging-app, teleports still crashes on BQ4.5, drawer icon number columns are fine now. Splash screen icon is shrinked:

kugiigi

I tried this on my Nexus 5. Here are my observations (some might have been reported already). Note that I don't have a sim card inserted so that might also a factor in some of these. Also, I used this as my daily driver before so it has plenty of data and may represent an upgrade from an actual daily driver device.

Splash image is not displayed correctly
App drawer only has 2 columns which was 3 before
Phone app and Fluffy Chat crashed when triggering the bottom edge
Messaging app opens fine but if you open a thread, the messages are jumbled and not displayed correctly
Calculator app opens but seems to fail to actually initialize so it's not interactive/working
Clock and Calendar app opens but crashes after a few seconds (I have google and NC calendars synced)
Contacts app works fine but dragging the bottom edge only shows the header until the drag is completed.
Dekko 2 and TELEports are blank. I have accounts configured.
PDFs are blank in Document viewer except in slideshow mode. Libreoffice files crashes the app.
Double-tapping in the OSK (cursor mover mode) is quite difficult to trigger.
It seems that Qt 5.12 is a bit less forgiving in codes like for example with layouts. My app Palitan has many warning logs and also there are some UIs not displayed which probably caused by those errors/warnings.
I also see Type error errors in JS in some apps. Probably related to the known issues with JavaScript which I believe was already discussed somewhere.
Honestly, expected a noticeable improvement in the performance but so far it's almost the same and I feel like I actually see more micro stutters but not sure though if I'm observing it right

dobey

@kugiigi said in Testing the upgrade to Qt 5.12:

Splash image is not displayed correctly

This should also be the case in stable/devel already, given the source, but fix is inbound in the 5.12 branch.

App drawer only has 2 columns which was 3 before

Fix already in.

Contacts app works fine but dragging the bottom edge only shows the header until the drag is completed.

Fixed now.

Double-tapping in the OSK (cursor mover mode) is quite difficult to trigger.

Seems to be mostly fine here on my Nexus 4, but it seems to get "stuck" after a while, and I don't see anything in the maliit-server log.

It seems that Qt 5.12 is a bit less forgiving in codes like for example with layouts. My app Palitan has many warning logs and also there are some UIs not displayed which probably caused by those errors/warnings.

Yes, in general it is a bit stricter. You'll need to fix your app.

I also see Type error errors in JS in some apps. Probably related to the known issues with JavaScript which I believe was already discussed somewhere.

There seems to be a few things that can cause this, but those apps will need to be fixed individually.

dobey

@lduboeuf said in Testing the upgrade to Qt 5.12:

So, sfxr, messaging-app, teleports still crashes on BQ4.5,

Can you get stack traces? I don't have an e4.5 and they are starting fine here on my nexus 4.

Thanks.

CiberSheep

@dobey said in Testing the upgrade to Qt 5.12:

@kugiigi said in Testing the upgrade to Qt 5.12:

Splash image is not displayed correctly

This should also be the case in stable/devel already, given the source, but fix is inbound in the 5.12 branch.

He might refer to
dev vs

Qt5.12

dobey

@CiberSheep said in Testing the upgrade to Qt 5.12:

He might refer to

Yes. I meant, I don't understand why this doesn't happen in dev, because the Splash.qml was specifying the source size as the same dimensions of the screen. But as I also said, it's fixed now on 5.12 branch too (well building currently).

CiberSheep

@dobey I see.
Also to note, if no splash screen is used, the app icon is shown correctly

kugiigi

@dobey Let us know when we can do an update and retest stuffs