UBports Robot Logo UBports Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Search
    • Register
    • Login

    Porting to Samsung Galaxy Note 4 SM-N910P

    Scheduled Pinned Locked Moved
    Porting
    8
    117
    44.6k
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • T
      tigerpro @doniks
      last edited by tigerpro

      @doniks its just the display-caf, media-caf, and audio-caf portions, and I have yet to get my system to actually retrieve them, but heres the link

      https://github.com/Ubuntu-Touch-GalaxyS?tab=repositories

      So far the dirtyRect issue Im running into seems to be just with ubports version of display-caf, none of the other repos Ive looked at seem to have any mention of it which makes things a little more complicated for me, but who knows, if I can get this repo to download the files maybe it will actually compile for once, Ill try again when I get home, I also made a thread on XDA-Developers, hoping someone else is trying this or even has an idea on how to progress through, only time will tell.

      #=== Edit ===#

      I took a crack at porting Halium, I get the same dirtyRect error there as I do with ubports, I am starting to wonder if the dirtyRect is something linux based, which would explain why I havent seen it in any Android repos. I also havent seen anything for qcom's *-caf repos that goes over cm 11 on android which is just adding to my confusion at this point. There is a wip repo that I came across but that doesnt have dirtyRect in it either. So at this point Im just confused about the whole qcom *-caf repos in general. I am gonna try just manually adding the galaxy repos I came across, but I dont expect much to happen with that as its for the phablet 4.4.2 r1 build (which I understand to be deprecaded now) Im all ears if anyone can either help me make heads or tails of the caf repos or has anything I can try to get the code to fully compile. Thanks

      #=== Edit 2 ===#

      So I manually copied the display-caf repo I came across for galaxy phones, no luck there either. Guess Im going back to the drawing board with dirtyRect and display-caf, I did manage to get the nexus 4 version from the old cannocal guide to compile, however I dont own a nexus 4 so I cant try it to see if it works. I at least know I can compile the nexus 4 version, now I should try it with ubports and see if I het similar results to old porting guide, that at least will narrow down my issue regardless of result.

      Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

      1 Reply Last reply Reply Quote 0
      • T
        tigerpro
        last edited by

        So I have made progress, I managed to find an un-official lineageOS repo for my phone, using that and a little trial and error I managed to get Halium to compile. I follow the halium porting guide, but when I get to the part that tells me to run the halium-install script, I keep getting an error saying that it "cant write 217 blocks, out of space?" Or something along those lines, not in front of my computer atm, I decided to ignore that error just to see if the kernel at least boots (TWRP warns theres no OS if I reboot at this point) and to my shock and amazment, after a couple mins I could actually follow the debug info and telnet in. I had to change a couple things in the kernel config according to diagnosis.log and init.log which Ive done already, but still get that space error when I run halium-install. Anyone out there run into this? If so, tips to tey and move from a working kernel to at least a working gui?

        Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

        D 1 Reply Last reply Reply Quote 0
        • D
          doniks @tigerpro
          last edited by doniks

          @tigerpro said in Porting to Samsung Galaxy Note 4 SM-N910P:

          So I have made progress, I managed to find an un-official lineageOS repo for my phone, using that and a little trial and error I managed to get Halium to compile.

          Niice! Which version?

          I follow the halium porting guide, but when I get to the part that tells me to run the halium-install script, I keep getting an error saying that it "cant write 217 blocks, out of space?" Or something along those lines, not in front of my computer atm,

          I remember there was another ubports forum conversation about a similar error message. Something about partition size settings ... I can't remember whether it was actually resolved, but see whether you can find that. Maybe it helps.

          EDIT: found it
          https://forums.ubports.com/topic/481/porting-to-motorola-moto-g-2013-lte
          It seems it was related to the filesystem it was being built on. Weird!

          T 1 Reply Last reply Reply Quote 0
          • T
            tigerpro @doniks
            last edited by

            @doniks I got Halium 7.1 to build, 5.1 kept giving me the dirtyRect error so I decided against trying to compile that. I actually just found the thread you linked, google is such a pain cause it keeps searching for helium despite me typing halium. I checked the respective files on my system, I did like you had mentioned in that post and deleted the same file and ran make systemimage gave me a file that matches the size of my boardconfig.mk size. I will try flashing again when I get home, ssh can only do soo much when your not in front of the computer your sshed too lol

            Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

            H 1 Reply Last reply Reply Quote 0
            • H
              hans1977se @tigerpro
              last edited by

              @tigerpro said in Porting to Samsung Galaxy Note 4 SM-N910P:

              google is such a pain cause it keeps searching for helium

              You could give the alternatives a go. πŸ™‚ This one is quite good:
              https://duckduckgo.com/

              T 1 Reply Last reply Reply Quote 0
              • T
                tigerpro @hans1977se
                last edited by

                @hans1977se yea I just usually default to google cause its what I use, duckduckgo is my fallback, someday I wont have to google Halium errors anymore lol

                Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                H 1 Reply Last reply Reply Quote 0
                • H
                  hans1977se @tigerpro
                  last edited by

                  @tigerpro yeah i know, i'm far worse with habits than i think i should be. πŸ™‚

                  T 1 Reply Last reply Reply Quote 0
                  • T
                    tigerpro @hans1977se
                    last edited by

                    @hans1977se arent we all? I am gonna keep searching if this flash attempt fails, I have a feeling my issue might be halium-install trying to copy the image to the wrong partition cause I tried flashing it with TWRP just out of curiosity, and it says the image is bigger than the partition (which explains the out of space) and TWRP only offers boot or recovery when I select the file, but since I just recompiled the system image it might have resolved itself, wont know until I get home to try it

                    Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                    H D 2 Replies Last reply Reply Quote 0
                    • H
                      hans1977se @tigerpro
                      last edited by

                      @tigerpro probably so in many cases. πŸ™‚

                      I hope this works out for you. It would be quite nice with some Samsung phones running Ubuntu i think. πŸ™‚

                      T 1 Reply Last reply Reply Quote 0
                      • T
                        tigerpro @hans1977se
                        last edited by

                        @hans1977se thats my sentiment exactly. Dont get me wrong Android is nice and all, but it leaves alot to be desired for an OS, I have a working kernel (hybris-boot.img) so far, just gotta figure out the rest to make it all work now. Keep an eye out for a possible resolution to Halium, Im so close I can taste it lol

                        Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                        H 1 Reply Last reply Reply Quote 0
                        • T
                          tigerpro
                          last edited by

                          Ok, this is weird, I did make systemimage earlier, file size matched at that time, now its 250-ish MB when it should be 300+, think I might have to just use the mkext4 program manually, Im doing make systemimage again just in case something happened when I wasnt looking, but if I have the same issue then I dunno, maybe try a different drive for the code compiling shrugs this is turning into a scooby doo mystery haha

                          Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                          1 Reply Last reply Reply Quote 0
                          • H
                            hans1977se @tigerpro
                            last edited by

                            @tigerpro There are a lot of good things in Android, but i think it's not really for technical people who likes it better somewhere nicer off the mainstream. πŸ™‚

                            Also i find it wrong to have someone constantly trying to watch you, 24/7, to find out how to make the most money out of your life.

                            T 1 Reply Last reply Reply Quote 1
                            • T
                              tigerpro @hans1977se
                              last edited by

                              @hans1977se well the monitoring is easily fixed via VPN, I myself use one whenever Im using a site with sensitive info, an ad blocker like Ad Away works really well too for the ads, I just want something different cause honestly, Im not a big fan of the current mobile OS offerings, anyways, getting slightly OT, if the make systemimage messes up again, Ill use mkext4 (or whatever the command is)

                              Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                              H 1 Reply Last reply Reply Quote 0
                              • D
                                doniks @tigerpro
                                last edited by doniks

                                @tigerpro said in Porting to Samsung Galaxy Note 4 SM-N910P:

                                @hans1977se arent we all? I am gonna keep searching if this flash attempt fails, I have a feeling my issue might be halium-install trying to copy the image to the wrong partition cause I tried flashing it with TWRP just out of curiosity, and it says the image is bigger than the partition (which explains the out of space) and TWRP only offers boot or recovery when I select the file, but since I just recompiled the system image it might have resolved itself, wont know until I get home to try it

                                That reminds me. Did you do this step?

                                https://docs.halium.org/en/latest/porting/index.html#include-your-device-in-fixup-mountpoints-script

                                What changes did you make to that script?

                                T 1 Reply Last reply Reply Quote 0
                                • H
                                  hans1977se @tigerpro
                                  last edited by

                                  @tigerpro I think it is a very complex thing to get the complete view of, but what i wanted to say is that i think it's conceptually wrong to constantly track people to get the most money out of you (or in any other way they might do or be doing in the future). You might forget to use your VPN or did not think it was necessary to use it at a particular time, and once they have your information they have it and once they have it their policy could change or a hacker can get hold of it.

                                  Who knows what will happen, but this is one reason why i'm here and hope that your port as well as other people's ports will be successful and make Ubuntu wider available. πŸ™‚

                                  1 Reply Last reply Reply Quote 1
                                  • T
                                    tigerpro @doniks
                                    last edited by tigerpro

                                    @doniks said in Porting to Samsung Galaxy Note 4 SM-N910P:

                                    @tigerpro said in Porting to Samsung Galaxy Note 4 SM-N910P:

                                    @hans1977se arent we all? I am gonna keep searching if this flash attempt fails, I have a feeling my issue might be halium-install trying to copy the image to the wrong partition cause I tried flashing it with TWRP just out of curiosity, and it says the image is bigger than the partition (which explains the out of space) and TWRP only offers boot or recovery when I select the file, but since I just recompiled the system image it might have resolved itself, wont know until I get home to try it

                                    That reminds me. Did you do this step?

                                    https://docs.halium.org/en/latest/porting/index.html#include-your-device-in-fixup-mountpoints-script

                                    What changes did you make to that script?

                                    @doniks I did do that step, its a bit confusing on which partitions they want cause I used all of the others to try and figure out a pattern, then decided to just put them all in there, Ill post the full section I added when I get a chance.

                                    #=== EDIT ===#

                                    @doniks this is the stuff I added to fix mountpoints, im not sure whats needed and what isnt, but I think I have it entered correctly

                                    "trltespr")
                                    sed -i
                                    -e 's block/platform/msm_sdcc.1/by-name/aboot mmcblk0p7 '
                                    -e 's block/platform/msm_sdcc.1/by-name/apnhlos mmcblk0p1 '
                                    -e 's block/platform/msm_sdcc.1/by-name/boot mmcblk0p17 '
                                    -e 's block/platform/msm_sdcc.1/by-name/cache mmcblk0p25 '
                                    -e 's block/platform/msm_sdcc.1/by-name/carrier mmcblk0p26 '
                                    -e 's block/platform/msm_sdcc.1/by-name/dbi mmcblk0p5 '
                                    -e 's block/platform/msm_sdcc.1/by-name/ddr mmcblk0p6 '
                                    -e 's block/platform/msm_sdcc.1/by-name/efs mmcblk0p13 '
                                    -e 's block/platform/msm_sdcc.1/by-name/fota mmcblk0p19 '
                                    -e 's block/platform/msm_sdcc.1/by-name/mdm1m9kefs1 mmcblk0p14 '
                                    -e 's block/platform/msm_sdcc.1/by-name/mdm1m9kefs2 mmcblk0p15 '
                                    -e 's block/platform/msm_sdcc.1/by-name/mdm1m9kefs3 mmcblk0p10 '
                                    -e 's block/platform/msm_sdcc.1/by-name/mdm1m9kefsc mmcblk0p16 '
                                    -e 's block/platform/msm_sdcc.1/by-name/misc mmcblk0p20 '
                                    -e 's block/platform/msm_sdcc.1/by-name/modem mmcblk0p2 '
                                    -e 's block/platform/msm_sdcc.1/by-name/pad mmcblk0p11 '
                                    -e 's block/platform/msm_sdcc.1/by-name/param mmcblk0p12 '
                                    -e 's block/platform/msm_sdcc.1/by-name/persdata mmcblk0p23 '
                                    -e 's block/platform/msm_sdcc.1/by-name/persist mmcblk0p22 '
                                    -e 's block/platform/msm_sdcc.1/by-name/recovery mmcblk0p18 '
                                    -e 's block/platform/msm_sdcc.1/by-name/rpm mmcblk0p8 '
                                    -e 's block/platform/msm_sdcc.1/by-name/sbl1 mmcblk0p3 '
                                    -e 's block/platform/msm_sdcc.1/by-name/sbl1bak mmcblk0p4 '
                                    -e 's block/platform/msm_sdcc.1/by-name/ssd mmcblk0p21 '
                                    -e 's block/platform/msm_sdcc.1/by-name/system mmcblk0p24 '
                                    -e 's block/platform/msm_sdcc.1/by-name/tz mmcblk0p9 '
                                    -e 's block/platform/msm_sdcc.1/by-name/userdata mmcblk0p27 '
                                    "$@"
                                    ;;

                                    Let me know if I should change any of this

                                    Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                                    D 1 Reply Last reply Reply Quote 0
                                    • D
                                      doniks @tigerpro
                                      last edited by

                                      @tigerpro ok. How did you decide which partition number to put where, eg., how did you decide to pick 17, 24 and 27 for boot, system and userdata? What are the partition sizes? Whats the content of your board config file? What is the exact error message you get?

                                      T 1 Reply Last reply Reply Quote 0
                                      • T
                                        tigerpro @doniks
                                        last edited by

                                        @doniks I was using the Sailfish HADK to figure that out, I forget what the actual command was, but I did "adb shell" then another command which output that info, I copy and pasted from my terminal into the fix mountpoints file then formatted it to the correct format for the file. I tried to manually adb push the system.img to the same destination the script was (/data based on my understanding) which worked, but that juat makes my phone boot loop so I think I might be missing something, I looked at the kmesg file as well, the last entry it had was "booting linux" but thats also not happening otherwise I would be posting files lol

                                        Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                                        D 1 Reply Last reply Reply Quote 0
                                        • D
                                          doniks @tigerpro
                                          last edited by

                                          @tigerpro said in Porting to Samsung Galaxy Note 4 SM-N910P:

                                          @doniks I was using the Sailfish HADK to figure that out, I forget what the actual command was, but I did "adb shell" then another command which output that info, I copy and pasted from my terminal into the fix mountpoints file then formatted it to the correct format for the file.

                                          Ok

                                          I tried to manually adb push the system.img to the same destination the script was (/data based on my understanding) which worked,

                                          Hang on. So you DO have a system.img file? I thought make systemimage fails?! (Can you still post that error?)

                                          but that juat makes my phone boot loop so I think I might be missing something, I looked at the kmesg file as well, the last entry it had was "booting linux" but thats also not happening otherwise I would be posting files lol

                                          Maybe post the whole kmesg. Boot loop could be all kinds of other problems.

                                          T 1 Reply Last reply Reply Quote 0
                                          • T
                                            tigerpro @doniks
                                            last edited by

                                            @doniks said in Porting to Samsung Galaxy Note 4 SM-N910P:

                                            I tried to manually adb push the system.img to the same destination the script was (/data based on my understanding) which worked,

                                            Hang on. So you DO have a system.img file? I thought make systemimage fails?! (Can you still post that error?)

                                            I originally was having an error with "mka systemimage" I tried it after I did a make clean cause I started to randomly get an error with "mka mkbootimg" so I just did a make clean (which failed, Had to manually delete a file for it to succeed) after that, I repo synced, and everything started to work again, so no idea on that one, but yes it does generate a system.img now, wether or not its correct is a different story.

                                            but that juat makes my phone boot loop so I think I might be missing something, I looked at the kmesg file as well, the last entry it had was "booting linux" but thats also not happening otherwise I would be posting files lol

                                            Maybe post the whole kmesg. Boot loop could be all kinds of other problems.

                                            full kmsg:

                                            • daemon not running. starting it now on port 5037 *
                                            • daemon started successfully *
                                              {490562} sbl1_ddr_init:: ret[0xffff]
                                              {491080} sbl1_ddr_zi_init:: ret[0xfffe]
                                              {492880} @@ pm power on reason : 0x20000000c1
                                              {492910} @@ reset status : 0x0
                                              {492941} clock_init, Start
                                              {493185} clock_init, Delta
                                              {493185} boot_dload_dump_tz:: Not Allowed!!
                                              {493246} boot_fota_restore_partition, Start
                                              {494740} boot_fota_restore_partition, Delta
                                              {494832} Image Load, Start
                                              {656573} Tz Execution, Start
                                              {821151} Tz Execution, Delta
                                              {821212} boot_fota_close_hdev, Start
                                              {821243} boot_fota_close_hdev, Delta
                                              {821670} RPM loading is successful.
                                              {821700} Image Load, Start
                                              {885689} Signal PBL to Jump to RPM FW
                                              {887092} Image Load, Start
                                              {911431} WDT Execution, Start
                                              {911736} WDT Execution, Delta
                                              {911797} Image Load, Start
                                              {1197247} sbl1_efs_handle_cookies, Start
                                              {1197430} sbl1_efs_handle_cookies, Delta
                                              {1197460} RPM sync cookie updated
                                              {1201242} SBL1, End
                                              welcome to lk

                                            platform_init()
                                            target_init()
                                            HW REV12 : (1, 1, 0, 0)
                                            HW_REV_READ 12
                                            sec_init: Start
                                            check power key with 0x283b389e
                                            Power on status : 0x20000000c1 (HARD RESET, Cable Power on, Keypad Power on)
                                            [MUIC] MUIC initialized !
                                            muic_driver_init
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            [MUIC] init_microusb_ic: CONTROL1:0x00
                                            [MUIC] init_microusb_ic: CONTROL1:0x00
                                            [MUIC] init_microusb_ic: CONTROL2:0x3b
                                            [MUIC] init_microusb_ic: CONTROL2:0x3b
                                            MMC Product Name: R218MA
                                            MMC_FIRMWARE_VERSION: 0x5
                                            eMMC CMD21 tuning DATA error handled. status = 0x20
                                            Done initialization of the card

                                            MODEL_NAME:{{SM-N910P}}
                                            eMMC_SERIAL_NUMBER:{{150100523231384d4100110ddabf1200}}

                                            aboot_init()
                                            REBOOT MODE : 0x283b389e
                                            ENABLE LVS1 for sensorhub
                                            ENABLE LDO9
                                            oem_panel_select panel_id = 3
                                            target_ldo_ctrl ++, enable = 1
                                            Setting LDO26 1
                                            muic_get_device
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            get_charger: hw_rev(0xc)
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            aboot_dev_charging_init : cable_status(1), cable_type(0)
                                            max77823_get_battery_detect : battery(0)
                                            aboot_dev_charging_init, [battery] batt_id_value (0)
                                            max77823_set_charger_state: buck(1), chg(0), reg(0x04)
                                            get_charger: hw_rev(0xc)
                                            [battery] external charger init
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            max77823_set_fast_charging_current_data : fast charging current 460mA(0x09)
                                            max77823_set_charging_current_limit_data : input current limit: reg = c0, 460mA(0x0d)
                                            fuel_gauge_read_vcell: VCELL(3819), data(0xbefa)
                                            max77823_set_charger_state: buck(1), chg(0), reg(0x04)
                                            aboot_dev_charging_init : vcell(3819), count(0)
                                            Setting 12
                                            Setting 2
                                            Setting 22
                                            target_ldo_ctrl --
                                            Panel power on done
                                            target_panel_clock
                                            first_qcom_dload_magic=0xffffffff,second_qcom_dload_magic=0xffffffff
                                            mdp_gdsc_ctrl = 1
                                            ERROR: splash Partition invalid
                                            Config MIPI_CMD_PANEL.
                                            pinfo->mipi.dual_dsi = 1
                                            target_panel_reset ++ enable=1
                                            target_panel_reset ...0
                                            target_panel_reset --
                                            Panel Reset--
                                            target_panel_reset ++ enable=1
                                            target_panel_reset ...0
                                            init_fuelgauge: Start!!
                                            muic_get_jig_status
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            init_fuelgauge: Battery type : SDI, capacity: 6600, status: 128
                                            init_fuelgauge: Already initialized (0x19c8, SDI type)
                                            get_charger: hw_rev(0xc)
                                            max77823_set_charger_state: buck(1), chg(1), reg(0x05)
                                            fuel_gauge_read_vcell: VCELL(3815), data(0xbec0)
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            muic_get_jig_status
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            check_low_power : rb=0, jig=0, ct=1, vcell=3815
                                            skip check low power
                                            vibrator started
                                            set_vibe_tonz
                                            [tspdrv]nForce===7
                                            vibe_set_pwm_freq
                                            VIBRATOR is ENABLED :::
                                            Haptic ENABLED :::
                                            target_panel_reset --
                                            Panel Reset Done---
                                            mdss_dual_dsi_cmds_tx---4
                                            mdss_dual_dsi_cmds_tx---1
                                            mdss_dual_dsi_cmds_tx---1
                                            mdss_dual_read_manufacture_id : id1 : 0x50 id2 : 0x20 id3 : 0x9
                                            mdss_dual_dsi_cmds_tx---19
                                            vibrator stopped
                                            set_vibe_tonz
                                            VIBRATOR is DISABLED :::
                                            sec_init:END
                                            mdss_dual_dsi_cmds_tx---3
                                            mdss_dsi_cmd_mode_config
                                            mdss_dsi_cmd_mode_config
                                            pinfo->mipi.dual_dsi = 1 1
                                            mipi_pinfo.num_of_display_on = 1
                                            mdss_dual_dsi_cmds_tx---1
                                            BOOTLOADER VERSION : N910PVPU4COJ6
                                            before aboot_check_mode() , boot_mode=0x0
                                            Get DATA success.

                                            react_lock flag(id:2)
                                            Get DATA success.

                                            react_lock flag(id:10)
                                            init react lock flag 0x0
                                            init cc mode flag 0x0
                                            check_boot_mode = key Down[0], Up[1]
                                            cable_type =0x0, reboot_mode=0x283b389e
                                            check_ramdump_mode :: k_param.debuglevel[0x574f4c44]::k_param.cp_debuglevel[0x0]
                                            check_pit_integrity: invalid pit magic code.(0x0)
                                            SECURE : Signature verification...
                                            SECURE : Signature verification succeed
                                            before check_lpm_mode
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            is_reboot_case =0
                                            cable_status = 1
                                            enter normal booting mode
                                            AST_POWERON
                                            display_boot_image ++
                                            Corrupt JPEG data: u extraneous bytes before marker 0x02x
                                            Invalid JPEG file structure: two SOI markers
                                            exit
                                            Invalid JPEG file structure: two SOF markers file structure: two SOI markers
                                            exit
                                            Didn't expect more than one scanΓΉΓΊΒ“
                                            exit
                                            after aboot_check_mode()
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            fuel_gauge_read_vcell: VCELL(3827), data(0xbf64)
                                            muic_get_jig_status
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            fuel_gauge_read_soc: SOC(45), data(0x2dc6)
                                            check_low_battery : rb=0, jig=0, vcell=3827, soc=45
                                            reboot_mode = 0x283b389e, boot_mode = 3, por = 0xc1
                                            <LP> RECOVERY BOOTING.....
                                            LK Area: 0xF800000 - 0xFA00000
                                            Kernel Addr: 0x8000
                                            Ramdisk Addr: 0x2600000
                                            Second Addr: 0xF00000
                                            Tags Adddr: 0x2400000
                                            use_signed_kernel=0, is_unlocked=0, is_tampered=0.
                                            Loading boot image (11153408): start
                                            Loading boot image (11153408): done
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 0]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 1]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 2]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 3]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 4]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 6]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 7]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 8]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 9]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 10]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 12]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 13]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 14]
                                            board[model_info:03010008, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 15]
                                            ERROR: Unable to find suitable device tree for device model_info:0x03010008
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 0]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 1]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 2]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 3]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 4]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 6]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 7]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 8]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 9]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 10]
                                            board[model_info:b208ff01, sec_rev:12], dtb[dt_model_info:b208ff01, dt_board_rev 12]
                                            matched device tree : b208ff01, rev12
                                            boot image size(14549248)
                                            SECURE: signature check fail. (recovery.img)
                                            init_ddi_data: usable ddi data.
                                            [TIMA boot measurement] : Old/non-CL device - KNOX warranty void
                                            <LP> Set Warranty Bit : recovery
                                            [TIMA trusted boot]: SMC call to set the warranty violation fuse succeeded
                                            SET WV: API Status 0x0
                                            WB : Already SET 2, VER : N910PVPU4COG5
                                            WP 3, 1
                                            Loading keystore failed status 5 cmdline = 'console=null androidboot.hardware=qcom androidboot.bootdevice=msm_sdcc.1 user_debug=31 msm_rtb.filter=0x37 dwc3_msm.cpu_to_affin=1'
                                            PCD Detect GPIO Status = 1
                                            Target_cont_splash=1
                                            PCD Detect GPIO Status = 1
                                            WV: API Status 0x0
                                            WV: API Status 0x0
                                            muic_get_jig_status
                                            [MUIC] microusb_get_attached_device: STATUS1:0x1f, 2:0x41
                                            [MUIC] microusb_get_attached_device: chgtyp+adc: 0x11f
                                            RUSTPROOF : k_param.uartsel = 0x3
                                            RUSTPROOF : Disable uart.
                                            SET HV Charge mode : Disable (0x3)
                                            WV: API Status 0x0
                                            Warranty Bit Set - Blowing KAP_VIOLATION_FUSE

                                            Booting Linux
                                            TZ informed of recovery status: 1
                                            pm8x41_get_is_cold_boot: cold boot
                                            cmdline: console=null androidboot.hardware=qcom androidboot.bootdevice=msm_sdcc.1 user_debug=31 msm_rtb.filter=0x37 dwc3_msm.cpu_to_affin=1 cont_splash=1 androidboot.sec_atd.tty=/dev/ttyHSL0 sec_log=0x100000@0x10000008 sec_dbg=0x80000@0x10100008 sec_debugenable subcmdline
                                            Updating device tree: start
                                            Updating device tree: done
                                            Turn off MIPI_CMD_PANEL.
                                            PCD Detect GPIO Status = 1
                                            Target_cont_splash=1
                                            PCD Detect GPIO Status = 1
                                            Target_cont_splash=1
                                            PCD Detect GPIO Status = 1
                                            Target_cont_splash=1
                                            Continuous splash enabled, keeping panel alive.
                                            booting linux @ 0x8000, ramdisk @ 0x2600000 (4847054), tags/device tree @ 0x2400000
                                            [eMMC] WP status = 0x00, addr = 0x0, (0x01: Temporary WP; 0x02: Power_on WP)
                                            [eMMC] Power on Write Protect set for sector [0 ~ 0x6000000]
                                            [eMMC] WP status = 0x02, addr = 0x0, (0x01: Temporary WP; 0x02: Power_on WP)
                                            WV: API Status 0x0
                                            Booting Linux

                                            let me know if you see something I missed, I never get a splash screen, or anything, it either just sits there and does nothing or boot loops, system.img being manually pushed is the only difference I have noticed, although my last attempt before going to bed last night was just a stuck screen, after I had pushed the system.img manually so I dunno whats going on.

                                            Whether you think you can, or you can't, if you do not try, you will never truly know. So give it a Go.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post