[Halium9-GSI] - Oneplus 3(T)
-
Edit : After 2 months as daily driver
Ubports on this device is really nice and definitively faster than Halium 7.1
I did notice a critical bug that I'm not able to identify the source exact, but I would think it's at android level => Rild. After some time ofonod is not anymore able to get cell signal information, ofonod is not crashing but simply not able to get modem information. Tragic side of the bug, the cell signal freeze and making you thinking everything is fine, while you cannot make and receive a call...
I've made a small watchdog/hack reading the log of ofonod and when cell tower information is lost it kill Ofonod and Telepathy-ofonod (Otherwise it's loose it's DBUS-id). So far killing ofonod is the only way to get back cell tower signal. It happen randomly, sometime 4 times during an hour, sometime 4 time during the day...
It's not a fix, but a dirty hack letting me using the phone daily without issue and studying this problem :).Except that the limitation relies on the GSI image rather than the port itself.
I've updated the working/not working section thanks of Flo list.
Hello,
After working on the Halium 7.1 port OP3, i've gave a shot to the Halium 9 thanks to the help of the Halium telegram group especially Erfan.This use the great work of the Halium developpers and GSI image from Erfan.
This is a proof of concept, only, and not supposed to be run as a daily driver, even if it's possible.
The port is based on- A trebelized OP3(T) device,
- A modified lineage OS (Trebelized) to acquire the vendors partition
- The Ubports GSI from Erfan (Updated weekly).
Becareful, this is not a standard H7.1 or H9 port but a H9-GSI port, I didn't try to build a device image with H9.
It's running pretty smooth.
To avoid confusion with Halium 7.1 I've created a dedicate repository : https://github.com/OP3-Halium.
Sources:
Kernel: https://github.com/OP3-Halium/android_kernel_oneplus_msm8996
Device (Lineage base): https://github.com/OP3-Halium/android_device_oneplus_oneplus3
Ubports GSI : look into https://t.me/ErfanGSICompiles files:
https://drive.google.com/drive/folders/1vnJEKkhO3xqH-fWWG55-yxwx5K1EeKq7?usp=sharingStatus:
-
Working:
Actors: Manual brightness
Actors: Notification LED
Actors: Torchlight
Actors: Vibration
Camera: Flashlight
Camera: Photo (Yes zoom super slow)
Camera: Video (Yes zoom super slow)
Camera: Switch between back and front camera
Cellular: Incoming, outgoing calls
Cellular: MMS in, out
Cellular: PIN unlock
Cellular: SMS in, out
Cellular: Change audio routings
Cellular: Voice in calls
Cellular: Adjust volume during a call
Endurance: Battery lifetime > 24h from 100%
Endurance: No reboot needed for 1 week
GPU: Boot into UI
GPU: Hardware video decoding
Misc: Anbox patches applied to kernel
Misc: AppArmor patches applied to kernel (Kernel 3.4, 3.10, 3.18)
Misc: Battery percentage
Misc: Offline charging
Misc: Online charging
Misc: RTC time is used after reboot
Network: Bluetooth (Yes but cannot be stopped)
Network: Flight mode
Network: Hotspot
Sensors: Automatic brightness (However Erfan modification requires custom .deb - Ask me)
Sensors: Fingerprint reader (Yes ! thanks to Erfan)
Sensors: GPS
Sensors: Proximity
Sensors: Rotation
Sensors: Touchscreen
Sound: Earphones
Sound: Loudspeaker
Sound: Microphone
Sound: Volume control
Ssh: yes
OP3 specific : Finger print reader button calls Dash menu -
Working with additional steps:
Cellular: Carrier info, signal strength (loss sometime, need to flash the file OP3_GSI_Fix_V1.2.zip after Erfan GSI)
Cellular: Data connection (Yes select 4G, depending of deb version icon might not be there)
Network: Bluetooth (For better hardware compatibility Bluez 5.53 can be use : https://ci.ubports.com/job/ubports/job/bluez-packaging/job/xenial_-_even-newer-bluez/)
Network: WiFi (To restart it easily, need to flash the file OP3_GSI_Fix_V1.2.zip after Erfan GSI)
OP3 specific : Dash charging (need to flash the file OP3_GSI_Fix_V1.2.zip after Erfan GSI)
OP3 specific : Tri state switch (upper position silent mode) (need to flash the file OP3_GSI_Fix_V1.2.zip after Erfan GSI) -
Not working:
Network: Bluetooth Call (Call got redirected to speaker :/)
Misc: Shutdown / Reboot ( Most of the time no)
Misc: Recovery image (Not with GSI)
Misc: Reset to factory defaults (Not with GSI)
(Network: NFC - disabled atm due to no middleware)
USB: MTP access
USB: ADB access
USB: External monitor - only for devices that support it
OTA / Update : To update the GSI image, an apt-get upgrade needs to be done below.
Install:
Everything to install is it there : https://github.com/OP3-Halium/DocumentationNote:
- Once you trebilized your phone, you can still use it as before and install non treble OS.
- Until Ubports GSI future is properly define, to upgrade your system you need to mark on hold the following packages, otherwise your phone will not boot :
sudo apt-mark hold hfd-service hfd-service-tools libqt5feedback5-hfd lxc-android-config powerd qml-module-hfd qtubuntu-android repowerd repowerd-data repowerd-tools
- The zip OP3_GSI_Fix_V1.2.zip contains
- Fix for Tri-state switch
- Temporary fix Mobile Morph webview, as the form factor is not capture in GSI image
- Fix battery management - allow to stop charging beyond defined battery %
- Hack to restart ofonod when cell signal lost
- Activate Dash charging
- Fix wifi restart
Anybody willing to help is welcome ^^ even for testing.
Short video : https://gfycat.com/infamousorganicichneumonfly
-
@ernest I will try it when will have a little time to test. Just a few questions here:
Is Bluetooth calling working as well or not?
Wifi - have you applied the same trick as H7.1 already and I don't need to do anything else to have it working?
Flash light? Is it working after installing: sudo ubports-qa install PR-22
and: sudo install indicator-power ?It would be great if it's working as you said, so switching between Android 9 and UT GSI/HAL 9 won't need reflashing firmware ( just to restore backup created with TWRP)
Many thanks for your and others hard work to bring UT on Op3/3t
-
- Bluetooth is rootfs dependent mainly. Cf post of @peat_psuwit.
- Wifi - Not yet, I've found a nicer solution for 7.1 too so I'll update both. But while wait I can tell you we the two files should go. I'll see how it goes on h7.1 but seems way smoother in H9. I hope my update will make smoother H7.1 too.
As it's still under WIP and GSI is standardize, likely i'll create a patch OP3. - Flash ligth, i'm using a modified app .. an old indicator, I'll to recompile it for armhf rootfs.
I'm not sure what the firmware change does... I didn't flash specific one for the ubports version and likely they're from latest official Oneplus image. I don't see much problem.
Each time you'ill need to flash halium-boot, lineage modified and ubports GSi. -
Living proof (of concept):
https://www.youtube.com/watch?v=UyOcQtNDZwM -
Hello, just to let some potential users know that i've updated the first post and add created a OP3_GSI_Fix_V1.X.zip to fix / compensate OP3 specific bugs.
-
Can I ask about swipe to close app bug, is it still hard to close app?
-
@danqo6 sure, it's an issue in the GSI image, not phone dependent.
-
Very interesting. So interesting that I've tried - but I already failed with 'treblezing' the device - and the rest of the documentation is even more thrilling...
I still got some general questions about GSI on 3T. Perhaps somebody reading this can answer them:
- Is 'treblezing' the future direction for 3T, i.e. will there be a 'vendor' system plus (device-independant) GSI images?
- Are GSI images android version dependant? I.e. will there be different GSI images for android 9, android 10, and so on?
- Is 'Halium9-GSI' a official Halium version? Will GSI be the direction Halium will take?
- I still haven't understood what modifications are needed on boot and kernel for GSI. Can somebody elaborate on this?
- [off-topic] It seems that there are other (unofficial) GSI image, e.g. lineage images. Is there a change that they run on 3T?
-
@aanno said in [Halium9-GSI] - Oneplus 3(T):
Very interesting. So interesting that I've tried - but I already failed with 'treblezing' the device - and the rest of the documentation is even more thrilling...
I still got some general questions about GSI on 3T. Perhaps somebody reading this can answer them:
- Is 'treblezing' the future direction for 3T, i.e. will there be a 'vendor' system plus (device-independant) GSI images?
Are you refering to OP3 ubports future ? I'm not in the position to decide. I've supported halium 7.1 port, add my small participation to previous amazing work by fixing there and there bugs + enabling bluetooth over 6 months. The results is still far from perfect significant bugs remains...and some hardware issue like the fingerprint reader.
I tooks me 2 weeks to enable the device for Erfan GSI ubports....and the result was great in term of daily usage (Once i found a counter measure to the ofono/rild bug, but still not a proper fix)
Now I'm testing V10- Are GSI images android version dependant? I.e. will there be different GSI images for android 9, android 10, and so on?
Currently it's android 9 vendor depend.
- Is 'Halium9-GSI' a official Halium version? Will GSI be the direction Halium will take?
Good question, I'm not the one able to answer.
- I still haven't understood what modifications are needed on boot and kernel for GSI. Can somebody elaborate on this?
From the phone I'm limited in the answer but kernel requires modification to allows the android container and ubports to boot. I suggest to read the halium documentation and join telegram halium group.
- [off-topic] It seems that there are other (unofficial) GSI image, e.g. lineage images. Is there a change that they run on 3T?
I didn't try, due to my lack of interest in android in general.
-
-
@Stefano Sure, i'll do it, in a week or two.
-
@ernest Where can I find this watchdog script you made? The PinePhone is suffering from similar problems that I have been trying to solve for a while, and (parts of) it might be useful there as well.
-
@kkeijzer said in [Halium9-GSI] - Oneplus 3(T):
@ernest Where can I find this watchdog script you made? The PinePhone is suffering from similar problems that I have been trying to solve for a while, and (parts of) it might be useful there as well.
I'm looking for a ratio between two output of ofono : battery_props_changed vs ril_netreg_get_signal_strength .
If there is too much battery_props_changed, I force ofonod and telepathy-ofono to restart.I notice two issues and i've difficulty to assess if there are linked or not : ofonod doesn't mind that it is loosing the cell tower information ... Thus signaling to the stack above that everything is fine. I suspect an issue between rild and ofonod, however on H9, I didn't success to generate ril log
Then the other issue, is that somethime the dbus id of ofono is not updated then telepathy-ofono and the apps are lost (impossible to close a call even if the call is already finish).I didn't yet create a repo however this is the script https://paste.ubuntu.com/p/KHS5DMNw3y/
I need to assess if that is still valid or not in V10 in arm64 (V9 is armhf).
Ps : you need to have ofonod started in debug mod : exec ofonod -ddd -P provision,udev*,dun*,smart*,hfp_bluez5,stktest,sap
-
@ernest A lot seems familiar. On the PinePhone the signal indicator always seems to work, but occasionally the modem just doesn't. So calls and texts don't come in and mobile data doesn't work any more.
When I then try a dbus call like
dbus-send --print-reply --system --dest=org.ofono /quectelqmi_0 org.ofono.Modem.SetProperty string:"Powered" variant:boolean:false
, attempting to restart the modem, it will time out. So clearly something in oFono is stuck. (Normally that query should disable the modem andvariant:boolean:true
should power it up again.)The cleanest way to fix it is
sudo service ofono restart
(better thanpkill -9 ofonod
I'd say), after which mobile data starts working again. But then I run into the problem that the dialer app will show "No signal", and outgoing calls being impossible, with the logs printing something like:error: "org.freedesktop.DBus.Error.NameHasNoOwner" message: "Could not get owner of name 'org.freedesktop.Telepathy.Connection.ofono.ofono.connection_640ce7767735c59d6fbc2542a9a06c68': no such name"
The fix for that is running
pkill telepathy-ofono
(there doesn't seem to be a service to restart, and I'm not sure how this is spawned) with some sleep timers I'm still working on, but that also seems similar to what you're doing. It looks like you're sleeping 20 seconds after killingofonod
, probably to give it time to re-initialize, but upstart would only give an exit code whenofonod
is back up. But still you'd probably need some time inbetween that way, because my experience is that killingtelepathy-ofono
right after upstart reports oFono as restarted won't work.My problem only is that I'm still looking for a way to do a non-destructive API call to figure out whether oFono is locked up or not. I can't look at RIL logs because there is no RIL on the PinePhone.
On the PinePhone, sometimes the technology preference option disappears, and the
org.ofono.RadioSettings.GetProperties
call would return "operation already in progress", which is a trigger for me. But sometimes the modem also locks up without this happening, so it's not ideal.Maybe
/usr/share/ofono/scripts/get-serving-cell-info
could be useful for you. You could check if this stops fluctuating and have your counter look at that? -
@kkeijzer
Very interesting, it seems really similar what your are experiencing....I've played a lot with busctl to try to extract a proper bus call response/property without much success, using the ofonod script was ending with a timeout response or very long response that was not acceptable for a watchdog.
I tried to switch on and off the modem through the ofono script and the results was not the expected one.It seems that ofonod doesn't or dbus update it's id then telepathy is lost. I'll try to stop the service in a cleaner way, thanks.
Looking in sailfish ofonod github and forum, I didn't find a similar issue. Moreover OP3 with Halium7.1 doesn't present this bug.
-
I started using v10 without modifications a week ago, most things are working fine and many rootfs issues was fixed with switching to android9 branches. Once a day I need to reboot phone due cellular network, opening camera is causing system crash, dash charging and tri-state switch probably don't work.
-
@danqo6 which phone do you have a 3 or a 3T ?
On the 3T the phone switch off when taking a picture...can find any relevant log so far
Look in my gdrive i've dropped a file fixing dash, phone cell and switch
-
@ernest hi, how did the testing go? any major issues?
-
It seems way smoother, I've upload a fix for the GSI V10. However on the OP3T, taking a picture shutdown the phone ....
So far I've no clue as the logs doesn't seems talkative and also I'm wondering if this issue is only for the 3T.
I'm looking for help on this bug. -
Hmm, this seems interesting. If you say "way smoother", that is also compared to the normal Halium7 port?
What about the bottom edge display? Does it have this partially desktop mode like on the Halium7 port as well, where many apps show the bottom edge as a button (like on convergent desktop) and thus break the layout of the app?