I can't flash Lenovo TB-X605L

Luksus

@monteros_007 sending the files should only be seconds or minutes.
After that, the installer tells you to unplug the usb-cable and that it is finished. Now device should reboot to recovery and complete the setup which also takes some minutes.

monteros_007

@luksus hmm strange proccess or I did something wrong. I see screen please hold on power down, up and power. Ok on the tablet I see recovery mode and installer actually shows preparing system, mounting partition about 10 minutes its ok?

Luksus

@monteros_007 now, in the installer hit tje button to confirm that device is in recovery, device needs to be connected still.

Then it should start to push the files.

monteros_007

@luksus how long mounting partitions?

Luksus

@monteros_007 can you sent a screenshot of the current installer status please?

monteros_007

@luksus on the table is recovery screen

on the installer :
image url)

Luksus

@monteros_007 thanks, that does not look right...
Can you please do the following:

let the device stay in recovery mode
the device should be connected to pc
restart the installer, and start the process from the beginning
uncheck "bootstrap"
check wipe
Hit "Ok"
Hit "Continue"

Now it should push the files again to the device...

Luksus

@luksus I hope the recovery also shows the "ubports recovery" and not the android one?

monteros_007

@luksus Yes, recovery ubport, not adroid. In general my tablet is detected as X605F but its L maybe its a problem?

Ok, I check WIPE and UNCHECK bootstrap, its cleaning up. How this proccess take along?

monteros_007

@monteros_007 Ok in my opinion its too long ;/ What now?

Luksus

@monteros_007 said in I can't flash Lenovo TB-X605L:

Yes, recovery ubport, not adroid. In general my tablet is detected as X605F but its L maybe its a problem?

No.

Ok, I check WIPE and UNCHECK bootstrap, its cleaning up. How this proccess take along?

Meh, that should not take long.
So it is not even starting to download any files.

I see you are using Ubuntu now?
Can you check in terminal: adb devices ?

monteros_007

@luksus yes, on recovery mode in adb I seen:
adb devices
List of devices attached
adb server version (41) doesn't match this client (39); killing...

daemon started successfully
de610635 recovery

Luksus

@monteros_007 ok, can you try to start ubports-installer -v from terminal please, and watch logs, when it is getting stuck?

monteros_007

@luksus in console:

monter@monter-vm:~$ ubports-installer start
Gtk-Message: 14:51:56.135: Failed to load module "canberra-gtk-module"
Gtk-Message: 14:51:56.136: Failed to load module "canberra-gtk-module"
info: Welcome to the UBports Installer version 0.9.7-beta!
[7881:0322/145156.312278:ERROR:object_proxy.cc(623)] Failed to call method: org.freedesktop.DBus.ListNames: object_path= /org/freedesktop/DBus: org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy prevents this sender from sending this message to this recipient; type="method_call", sender=":1.139" (uid=1000 pid=7881 comm="/snap/ubports-installer/435/app/ubports-installer " label="snap.ubports-installer.ubports-installer (enforce)") interface="org.freedesktop.DBus" member="ListNames" error name="(unset)" requested_reply="0" destination="org.freedesktop.DBus" (bus)
[7881:0322/145156.335582:ERROR:object_proxy.cc(623)] Failed to call method: org.freedesktop.DBus.ListNames: object_path= /org/freedesktop/DBus: org.freedesktop.DBus.Error.AccessDenied: An AppArmor policy prevents this sender from sending this message to this recipient; type="method_call", sender=":1.140" (uid=1000 pid=7881 comm="/snap/ubports-installer/435/app/ubports-installer " label="snap.ubports-installer.ubports-installer (enforce)") interface="org.freedesktop.DBus" member="ListNames" error name="(unset)" requested_reply="0" destination="org.freedesktop.DBus" (bus)
[7973:0322/145156.481575:ERROR:gbm_wrapper.cc(292)] Failed to export buffer to dma_buf: No such file or directory (2)
many
many
[7973:0322/145156.481575:ERROR:gbm_wrapper.cc(292)] Failed to export buffer to dma_buf: No such file or directory (2)
info: device detected: X605

Luksus

@monteros_007 ubports-installer -v ?

monteros_007

@luksus

verbose: Reading config file: undefined
info: device detected: X605
info: Installing Ubuntu Touch on your Lenovo Smart Tab M10 X605F/L (X605)
info: configuring...
info: settings: {"bootstrap":false,"wipe":true,"channel":"16.04/arm64/android9/stable"}
verbose: skipping step {"actions":[{"core:download":{"group":"firmware","files":[{"url":"https://gitlab.com/ubports/community-ports/android9/lenovo-tab-m10-fhd/lenovo-x605/-/jobs/2507752431/artifacts/raw/out/boot.img","checksum":{"sum":"ac25fb98d2e2757c2ac393a0c898389f73b175e3e74ba8775cbbd84552c5a0ad","algorithm":"sha256"}}]}}],"condition":{"var":"bootstrap","value":true}}
verbose: skipping step {"actions":[{"core:download":{"group":"firmware","files":[{"url":"https://gitlab.com/ubports/community-ports/android9/lenovo-tab-m10-fhd/lenovo-x605-assets/-/raw/main/recovery.img","checksum":{"sum":"67808f905623a208c702879085bdc83eb0d3b8332a57689764249ca1d800fa9e","algorithm":"sha256"}}]}}],"condition":{"var":"bootstrap","value":true}}
verbose: skipping step {"actions":[{"adb:reboot":{"to_state":"bootloader"}}],"fallback":[{"core:user_action":{"action":"bootloader"}}],"condition":{"var":"bootstrap","value":true}}
verbose: skipping step {"actions":[{"fastboot:flash":{"partitions":[{"partition":"boot","file":"boot.img","group":"firmware","raw":true}]}}],"condition":{"var":"bootstrap","value":true}}
verbose: skipping step {"actions":[{"fastboot:flash":{"partitions":[{"partition":"recovery","file":"recovery.img","group":"firmware","raw":true}]}}],"condition":{"var":"bootstrap","value":true}}
verbose: running step {"actions":[{"fastboot:format":{"partition":"userdata","type":"ext4"}}],"condition":{"var":"wipe","value":true}}
verbose: running fastboot action format

Luksus

@monteros_007 so it gets stuck on formatting and installer again shows the same image like you posted above?

monteros_007

@luksus said in I can't flash Lenovo TB-X605L:

@monteros_007 so it gets stuck on formatting and installer again shows the same image like you posted above?

Yes, cleaning up, formating userdata partition ;/

Luksus

@monteros_007 ah mh, for wiping it needs to be in fastboot mode..., maybe it is waiting for you to boot to bootloader again...

monteros_007

@luksus Ok, I try from scratch, actually:

tar.xz","keyring-28992f008be20d562ea06745f563d3abe00b08da1b16e5b92e448e2d4ba21e9f.tar.xz.asc","version-2.tar.xz","version-2.tar.xz.asc","image-signing.tar.xz","image-signing.tar.xz.asc","image-master.tar.xz","image-master.tar.xz.asc","ubuntu_command"],"dest":"/cache/recovery/"}}]}
verbose: running core action download
info: Downloading 14 files
info: Downloaded file 1 of 14
info: Downloaded file 2 of 14
info: Downloaded file 3 of 14
info: Downloaded file 4 of 14
info: Downloaded file 5 of 14
info: Downloaded file 6 of 14
info: Downloaded file 7 of 14
info: Downloaded file 8 of 14
info: Downloaded file 9 of 14
info: Downloaded file 10 of 14
info: Downloaded file 11 of 14
info: Downloaded file 12 of 14
info: Downloaded file 13 of 14
info: Downloaded file 14 of 14
verbose: running core action write
verbose: running adb action wait
verbose: running adb action preparesystemimage
verbose: running adb action push

How long should this process take?