error while installing lomiri-systems-settings

nibzy26 · 7 Nov 2023, 07:51

@lduboeuf said in error while installing lomiri-systems-settings:

sudo umount /usr/share/session-migration/scripts

@lduboeuf Thanks it solved one problem
but now complaining about dependency issue

setting up liblomirisystemsettingsprivate-dev:arm64 (1.0.2+1local~1699268765) ...

dpkg: dependency problems prevent configuration of lomiri-system-settings:
lomiri-system-settings depends on libdeviceinfo0 (>= 0.2.1+0~20231014230604.8+ubports20.04~1.gbp7e819c); however:
Version of libdeviceinfo0 on system is 0.2.0+0~20230918210732.7+ubports20.04~1.gbp72afc4.

dpkg: error processing package lomiri-system-settings (--install):
dependency problems - leaving unconfigured

I built these arm64 deb packages using crossbuilder

also tried to install it like
phablet@ubuntu-phablet:~/Documents$ sudo apt install libdeviceinfo0=0.2.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Version '0.2.1' for 'libdeviceinfo0' was not found
phablet@ubuntu-phablet:~/Documents$

nibzy26 · 7 Nov 2023, 08:04

Alos getting low spce issue on the phone
phablet@ubuntu-phablet:~/Documents$ df /
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/system 3026216 3009728 0 100% /
phablet@ubuntu-phablet:~/Documents$

How can I make some space . I dint install any large packages yet.

lduboeuf · 7 Nov 2023, 09:13

@nibzy26 said in error while installing lomiri-systems-settings:

@lduboeuf said in error while installing lomiri-systems-settings:

sudo umount /usr/share/session-migration/scripts

@lduboeuf Thanks it solved one problem
but now complaining about dependency issue

setting up liblomirisystemsettingsprivate-dev:arm64 (1.0.2+1local~1699268765) ...

dpkg: dependency problems prevent configuration of lomiri-system-settings:
lomiri-system-settings depends on libdeviceinfo0 (>= 0.2.1+0~20231014230604.8+ubports20.04~1.gbp7e819c); however:
Version of libdeviceinfo0 on system is 0.2.0+0~20230918210732.7+ubports20.04~1.gbp72afc4.

dpkg: error processing package lomiri-system-settings (--install):
dependency problems - leaving unconfigured

I built these arm64 deb packages using crossbuilder

also tried to install it like
phablet@ubuntu-phablet:~/Documents$ sudo apt install libdeviceinfo0=0.2.1
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Version '0.2.1' for 'libdeviceinfo0' was not found
phablet@ubuntu-phablet:~/Documents$

Hum not sure about how to work around that dependency issue. But for Lomiri System Settings, we have to increase a version in debian changelog.

lomiri-system-settings (1.0.4) unstable; urgency=medium

  * test

 -- UBports developers <developers@ubports.com>  Fri, 25 May 2023 07:55:10 +0100

uxes · 31 Aug 2024, 18:37

i think that i have a solution, since it is finally deployed on my phone now https://github.com/ubports/crossbuilder/pull/82

danfro · 15 Nov 2024, 15:52

Did anyone use crossbuilder recently? When running it on lomiri-system -settings from crosbuilder main branch I get this error:

dh_auto_configure: error: cd obj-aarch64-linux-gnu && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_AUTOGEN_VERBOSE=ON -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g\+\+ -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DPKG_CONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DPKGCONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DQMAKE_EXECUTABLE=/usr/bin/aarch64-linux-gnu-qmake -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF .. returned exit code 1
make[1]: *** [debian/rules:35: override_dh_auto_configure] Error 2```

lduboeuf · 18 Nov 2024, 01:37

@danfro said in error while installing lomiri-systems-settings:

Did anyone use crossbuilder recently? When running it on lomiri-system -settings from crosbuilder main branch I get this error:

dh_auto_configure: error: cd obj-aarch64-linux-gnu && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_AUTOGEN_VERBOSE=ON -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g\+\+ -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DPKG_CONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DPKGCONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DQMAKE_EXECUTABLE=/usr/bin/aarch64-linux-gnu-qmake -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF .. returned exit code 1
make[1]: *** [debian/rules:35: override_dh_auto_configure] Error 2```

I guess you try to build it for 24.04 if you are working on main branch.
Have you updated crossbuilder ?

danfro · 18 Nov 2024, 05:09

@lduboeuf Yes, I updated crossbuilder from master branch. Is that already configured for noble? Ah, looks like it from the merged PR history. But how can I use it for focal builds then? Revert that PR?

uxes · 18 Nov 2024, 05:57

@danfro i have been building from crossbuilders master branch last week,
crossbuilder --lxd-image=ubuntu:20.04 --architecture=arm64 build it still works, but seems only with arm64, amd build crashes

danfro · 18 Nov 2024, 10:34

@uxes Cool, thank. I will give that a try tonight. arm64 is sufficient for me for testing changes.

danfro · 18 Nov 2024, 19:49

@uxes said in error while installing lomiri-systems-settings:

crossbuilder --lxd-image=ubuntu:20.04 --architecture=arm64 build

Sadly this did not fix my issues. I run into the same error message.

danfro · 18 Nov 2024, 20:14

Hmm. I found this (kind of full error message):

# Debian defines CMAKE_INSTALL_LOCALSTATEDIR as /usr/var, which is wrong.
# So until Debian bug 719148 is fixed, do it ourselves.
dh_auto_configure -- -DCMAKE_INSTALL_LOCALSTATEDIR="/var" -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF
	cd obj-aarch64-linux-gnu && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_AUTOGEN_VERBOSE=ON -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g\+\+ -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DPKG_CONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DPKGCONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DQMAKE_EXECUTABLE=/usr/bin/aarch64-linux-gnu-qmake -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF ..
-- Could NOT find Lcov (missing: LCOV_EXECUTABLE GENHTML_EXECUTABLE) 
-- Could NOT find gcovr (missing: GCOVR_EXECUTABLE) 
-- Checking for module 'polkit-agent-1'
--   No package 'polkit-agent-1' found
CMake Error at /usr/share/cmake-3.16/Modules/FindPkgConfig.cmake:463 (message):
  A required package was not found

But I guess those are not missing on my system, but in lxd image, right?

lduboeuf · 18 Nov 2024, 20:37

@danfro said in error while installing lomiri-systems-settings:

@uxes said in error while installing lomiri-systems-settings:

crossbuilder --lxd-image=ubuntu:20.04 --architecture=arm64 build

Sadly this did not fix my issues. I run into the same error message.

Humm, and you are sure no old files are here ( like previous build for 20.04 ) ?

lduboeuf · 18 Nov 2024, 20:38

@danfro said in error while installing lomiri-systems-settings:

Hmm. I found this (kind of full error message):

# Debian defines CMAKE_INSTALL_LOCALSTATEDIR as /usr/var, which is wrong.
# So until Debian bug 719148 is fixed, do it ourselves.
dh_auto_configure -- -DCMAKE_INSTALL_LOCALSTATEDIR="/var" -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF
	cd obj-aarch64-linux-gnu && cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_BUILD_TYPE=None -DCMAKE_INSTALL_SYSCONFDIR=/etc -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DCMAKE_EXPORT_NO_PACKAGE_REGISTRY=ON -DCMAKE_FIND_PACKAGE_NO_PACKAGE_REGISTRY=ON -DCMAKE_INSTALL_RUNSTATEDIR=/run "-GUnix Makefiles" -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_AUTOGEN_VERBOSE=ON -DCMAKE_C_COMPILER=aarch64-linux-gnu-gcc -DCMAKE_CXX_COMPILER=aarch64-linux-gnu-g\+\+ -DCMAKE_SYSTEM_NAME=Linux -DCMAKE_SYSTEM_PROCESSOR=aarch64 -DPKG_CONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DPKGCONFIG_EXECUTABLE=/usr/bin/aarch64-linux-gnu-pkg-config -DQMAKE_EXECUTABLE=/usr/bin/aarch64-linux-gnu-qmake -DCMAKE_INSTALL_LIBDIR=lib/aarch64-linux-gnu -DCMAKE_INSTALL_LOCALSTATEDIR=/var -DENABLE_LIBDEVICEINFO=ON -DENABLE_UBUNTU_ACCOUNTSSERVICE=ON -DENABLE_TESTS=OFF ..
-- Could NOT find Lcov (missing: LCOV_EXECUTABLE GENHTML_EXECUTABLE) 
-- Could NOT find gcovr (missing: GCOVR_EXECUTABLE) 
-- Checking for module 'polkit-agent-1'
--   No package 'polkit-agent-1' found
CMake Error at /usr/share/cmake-3.16/Modules/FindPkgConfig.cmake:463 (message):
  A required package was not found

But I guess those are not missing on my system, but in lxd image, right?

Yes maybe they need to be installed within the lxd container. Or something wrong with control dependency declaration

danfro · 18 Nov 2024, 20:56

@lduboeuf I even grabbed a brand new clone of lomiri-system-settings and tried with that to make sure there is no bug in my local copy.

danfro · 18 Nov 2024, 20:57

@lduboeuf Can I do that via shell and then exit shell and run crossbuilder again?

lduboeuf · 18 Nov 2024, 21:08

@danfro said in error while installing lomiri-systems-settings:

@lduboeuf Can I do that via shell and then exit shell and run crossbuilder again?

yes, it will persist, so sudo apt install libpolkit-agent-1-devshould do it. But if you build for arm64, iirc you have to append the arch, e.g `sudo apt install libpolkit-agent-1-dev:arm64

danfro · 18 Nov 2024, 21:15

@lduboeuf said in error while installing lomiri-systems-settings:

sudo apt install libpolkit-agent-1-dev

Hmm. That might be the problem:

Err:16 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 libglib2.0-dev amd64 2.64.6-1~ubuntu20.04.4
  404  Not Found [IP: 2620:2d:4000:1::102 80]
Get:17 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 libpolkit-gobject-1-dev amd64 0.105-26ubuntu1.3 [59.9 kB]
Get:18 http://archive.ubuntu.com/ubuntu focal-updates/main amd64 libpolkit-agent-1-dev amd64 0.105-26ubuntu1.3 [22.2 kB]
Err:3 http://security.ubuntu.com/ubuntu focal-updates/main amd64 uuid-dev amd64 2.34-0.1ubuntu9.3
  404  Not Found [IP: 2620:2d:4000:1::102 80]
Err:4 http://security.ubuntu.com/ubuntu focal-updates/main amd64 libblkid-dev amd64 2.34-0.1ubuntu9.3
  404  Not Found [IP: 2620:2d:4000:1::102 80]
Err:5 http://security.ubuntu.com/ubuntu focal-updates/main amd64 libmount-dev amd64 2.34-0.1ubuntu9.3
  404  Not Found [IP: 2620:2d:4000:1::102 80]

danfro · 18 Nov 2024, 21:17

@danfro Ah, forgot the arch.

danfro · 18 Nov 2024, 22:14

@danfro Ok, so far I had to manually install those packages:

libpolkit-agent-1-dev:arm64
gcovr (including lcov)
libtrust-store-dev:arm64
libdeviceinfo-dev:arm64

Although the last one I haven't got installed yet, apt in the shell seems stuck when "setting up snapd". I guess that isn't really needed? can we drop all snaps stuff?

lduboeuf · 18 Nov 2024, 22:31

@danfro said in error while installing lomiri-systems-settings:

@danfro Ok, so far I had to manually install those packages:
libpolkit-agent-1-dev:arm64
gcovr (including lcov)
libtrust-store-dev:arm64
libdeviceinfo-dev:arm64
Although the last one I haven't got installed yet, apt in the shell seems stuck when "setting up snapd". I guess that isn't really needed? can we drop all snaps stuff?

ouch sounds weird, wonder what for all that is needed. But if it fails to build easily, maybe the debian control file is not correctly setup.
i guess yes no need for snap dependencies.