Call for testing: Google/Huawei Nexus 6P (angler) owners
-
@Flohack That suspicuously sounds like the beginning of the four core problem, if the phone runs hot under the thumb print reader.
But, could also be a faulty battery. I thought I had the four core problem on mine until I found the controller in the battery was failing. It started doing emergency shutdowns thinking the battery was overheating. I wasn't sure, so I replaced the battery, and problem went away.
-
@Flohack I still think it's worth supporting even with the four core problem. On four cores it still runs as nice or better than the Nexus 5 or Pinephone, with great sound, camera, and VoLTE support.
So, it's a good, and cheap, entry to mid level phone for UT, and more when running 8 cores.
-
@potet I had the same trouble with the battery on 30% load. This happens because I used the phone every day for more than 3 years. But after changing the battery with a new one I have no such problems any more.
-
@rocket2nfinity I agree. It might come our way that we need to generally use only 4 cores maybe. If this is a fatality for all device owners after some time or so.
But for the time being I can publish again 4-core kernel to overwrite after any update. Problem is to get it into our OTA-Update scheme, that wont be easy.
-
@Flohack I have the problem too. Sometimes when I update the phone and it reboots to install, it drains the battery from around 40%. It crashes between 3-28% too.
-
I experience frequent crashes preceded by lockups; is that what you guys are experiencing? (The other day, it crashed 3 times over the course of dinner, I thought it was because I was on developer channel). I suspect it has to do with ram usage. I downloaded gnome system monitor from libertine because htop wasn't working for me and it seems that the lockups happen at high ram usage when the 32 mb of cache are filled. I can avoid them by manually limiting my app usage to two to four apps at a time tops.
-
@DjDeets said in Call for testing: Google/Huawei Nexus 6P (angler) owners:
the 32 mb of cache are filled. I can avoid them by manually limiting my app usage to two to four apps at a ti
This is a different thing, I had freezing camera for example, or freezing navigation app, it would continue to work normally only after an endless number of minutes where nothing works, no touch input, no keypresses etc.
-
Somewhat unrelated, but is navigation supposed to work well? The device fails to give any estimate of my position at all, but it may also be a hardware flaw in my 6P.
-
@potet GPS was working last i checked it. Check with Sensorstatus or Meswerk available in the app store
-
@Flohack That does indeed sound like the four core problem - phone heats up while doing something, then stuff stops working, strange errors or actions, and reboots. Once cool, works again, until it doesn't.
-
This post is deleted! -
Great! The sound problem for incoming calls is fixed now.
-
@rocket2nfinity Looks like my GPS might be broken then.
SensorsStatus claims it found supported backend and that the GPS is active, and returns "Source status No error". However, "Last updated" is blank, and all the position indicators (longitude/latitude etc) just show a long dash.
The GPS was sometimes acting up on Android towards the end as well, so if nobody else is experiencing these issues it's probably safe to assume it's a hardware problem.
-
@potet My GPS works fine. You have to note to try it outdoor.
-
@potet What he said ^^^
GPS sensitivity is not so good indoors. Your sensors are indicating they are ok, but don't have lock. Try outside. The N6P is pretty quick to lock on with sufficient signal. If it doesn't, and the battery has been changed, then someone likely diconnected or damaged a connector/cable.
-
@rocket2nfinity No luck, but it's quite likely that it's broken hardware. My 6P has been subject to some serious fall damage, it's a wonder it's alive at all.
After the latest update (developer channel) it gets stuck at the boot screen though - might be because I upgraded to the newer version of Qt. In either case it's not booting any more, so I'd recommend others to upgrade with caution.
-
@potet Just updated Dev channel. Reboots just fine. No strange behavior. Are you on 4 or 8 cores? If 8, then try 4.
-
Just replaced the battery on my N6P yesterday. Previously, the phone was just sitting unused in my closet until I saw this release. Had some problems with random shutdowns, but that was due to the battery being unable to sustain voltage under high load. With the battery replaced, no random shutdowns, and battery life is incredible.
The new battery cost only $10, but I definitely needed a heat gun to get the adhesive off of the glass and plastic panel. The battery took just time, and a plastic spudger, and 2 playing cards.
Best ten bucks I've spent.Thanks so much for your work on this. I'm on the dev channel and noticed several things:
- wifi won't reconnect after suspending until I turn wifi on-off again.
- The anbox thing where no other app other than the defaults will run.
Thanks again!
-
@rocket2nfinity My Android install was 4 core, but I used the normal UBports image provided by flohack. Not sure what that makes me.
The device is stuck in the same situation as after the failed installs: It opens the boot screen, loads for a while, reboots, and then continues "loading" forever. The dots on the boot screen are moving, but nothing is happening.
Edit: Re-flashed developing channel, worked fine.
-
Hi all, I am not a developer, but I am trying UBports out on various devices. For the life of me , I cannot get it to install on my Nexus 6P (angler). I have followed all the steps and what people have done on this forum and every time it hangs at preparing system image. It won't go past that point. I have a semblance of UBports recovery, but no operating system. I am flashing it through my windows 10 machine, I have an unlocked phone which I also tried with rooting. Android 6 to 8.1 installs fine. I have dropped it back to 7.1.2, bootloader is unlocked, TWRP is installed, partitions wiped and so forth. I must be missing something somewhere, I have retraced steps, tried stable, edge and the other two, but it always hangs at Preparing system image (I have left it for a couple of hours and nothing changed). This is the only phone I have had an issue with so far. Has anyone any ideas?
