Call for testing: Google/Huawei Nexus 6P (angler) owners
-
@potet My GPS works fine. You have to note to try it outdoor.
-
@potet What he said ^^^
GPS sensitivity is not so good indoors. Your sensors are indicating they are ok, but don't have lock. Try outside. The N6P is pretty quick to lock on with sufficient signal. If it doesn't, and the battery has been changed, then someone likely diconnected or damaged a connector/cable.
-
@rocket2nfinity No luck, but it's quite likely that it's broken hardware. My 6P has been subject to some serious fall damage, it's a wonder it's alive at all.
After the latest update (developer channel) it gets stuck at the boot screen though - might be because I upgraded to the newer version of Qt. In either case it's not booting any more, so I'd recommend others to upgrade with caution.
-
@potet Just updated Dev channel. Reboots just fine. No strange behavior. Are you on 4 or 8 cores? If 8, then try 4.
-
Just replaced the battery on my N6P yesterday. Previously, the phone was just sitting unused in my closet until I saw this release. Had some problems with random shutdowns, but that was due to the battery being unable to sustain voltage under high load. With the battery replaced, no random shutdowns, and battery life is incredible.
The new battery cost only $10, but I definitely needed a heat gun to get the adhesive off of the glass and plastic panel. The battery took just time, and a plastic spudger, and 2 playing cards.
Best ten bucks I've spent.Thanks so much for your work on this. I'm on the dev channel and noticed several things:
- wifi won't reconnect after suspending until I turn wifi on-off again.
- The anbox thing where no other app other than the defaults will run.
Thanks again!
-
@rocket2nfinity My Android install was 4 core, but I used the normal UBports image provided by flohack. Not sure what that makes me.
The device is stuck in the same situation as after the failed installs: It opens the boot screen, loads for a while, reboots, and then continues "loading" forever. The dots on the boot screen are moving, but nothing is happening.
Edit: Re-flashed developing channel, worked fine.
-
Hi all, I am not a developer, but I am trying UBports out on various devices. For the life of me , I cannot get it to install on my Nexus 6P (angler). I have followed all the steps and what people have done on this forum and every time it hangs at preparing system image. It won't go past that point. I have a semblance of UBports recovery, but no operating system. I am flashing it through my windows 10 machine, I have an unlocked phone which I also tried with rooting. Android 6 to 8.1 installs fine. I have dropped it back to 7.1.2, bootloader is unlocked, TWRP is installed, partitions wiped and so forth. I must be missing something somewhere, I have retraced steps, tried stable, edge and the other two, but it always hangs at Preparing system image (I have left it for a couple of hours and nothing changed). This is the only phone I have had an issue with so far. Has anyone any ideas?
-
@MrT10001 the current version of the windows 10 installer is bugged
I had the same thing happen to me. You have to use the linux installer as far as I know. Maybe you could use windows subsystem for linux. Or perhaps the mac installer works. If you can't do either then maybe you can use the manual method described at the beginning of the thread or simply wait for the next installer release. -
@DjDeets Can you please send a log file from the installer when it hangs? It should be in %APPDATA% directory somewhere...
-
@DjDeets Thanks for that. I was going to give Linux a go next (time is the limiting factor at the moment) as I was wondering if it was a windows thing.
-
@Flohack I'm looking at 2 log files which I think are from that time (October 11th), but they're .OLD files for some reason. When I open them with notepad they don't seem to be functioning log files. Here's an example of the contents of one:
2020/10/11-13:37:37.233 60e4 Reusing MANIFEST C:\Users\Admin\AppData\Roaming\ubports-installer\Session Storage/MANIFEST-000001 2020/10/11-13:37:37.236 60e4 Recovering log #3 2020/10/11-13:37:37.238 60e4 Reusing old log C:\Users\Admin\AppData\Roaming\ubports-installer\Session Storage/000003.logThe files it's referring to seem to be gibberish, I don't know what to do from here. I would reinstall on windows to replicate the error, but I'm on day 5 of the Endurance test. (I think it was mentioned in the ubports podcast as "silently failing?" But I don't trust my memory.)
-
Rip, I accidentally let the 6p run out of power on day 6 and a few hours.
-
I'm just posting again with an update to other issues I've noticed with the 6P vs the Oneplus One.
- Bluetooth doesn't work.
- The lowest light setting is like a blinding torch in the dark at night
- Some web apps don't work that do work in in the OPO. I suspect this is a 64 vs 32 bit issue, but don't understand why that would occur in a webapp. Windy is a example of this. Interestingly enough, using webber to create a webapp works fine.
- I'm able to install a libertine container, but installing any app fails in a weird way that I don't really feel like typing up as I suspect this may be a known issue I just couldn't find when googling. I also suspect 64/32 bit architecture issue here, as well.
Previously reported observations that are still in effect:
- Wifi needs to be turned off/on again after locking
unrelated: The battery life after replacing the battery is fucking insane. For everyone complaining about that, I cannot recommend how much better it is enough. Get a heat gun, watch a youtube tutorial on how to do it, and get it done. It is so worth it.
This port is getting really good, though, thanks so much!
-
@Count042 Guess I'll be buying a battery. Is it possible that a hair dryer will do the job if I don't fancy getting a heat gun?
Regarding point 3, it's discussed here:
https://forums.ubports.com/topic/5047/can-ota-15-be-the-final-release-including-oxide
It'll probably not be fixed, as they're built in a framework that is no longer supported.For point 4: I experienced weird issues with the first container I made, even though it looked normal enough. Made a new one, and it worked fine. Could be worth giving it another try.
I've also struggled with the brightness - I used to love how dark the screen could get on Android.
-
@potet I suspect you're right about number 3. Thanks for that. I'm just getting into the community and still learning a lot about UBPorts.
Regarding the heat gun, yeah, I'd get one. With the extra heat, you can easily remove the glass at the top, and the plastic on the bottom with an exacto knife, without breaking the plastic or the glass. Or, at least, I was able to. Most people seem to break them when trying to remove them with a hair dryer. You'll also probably want one of those two suction cups on a levered handle tool, as well.
I've done an Nexus 6p without those, and it was just painful. I have a life philosophy of just buying a specialized tool when I need one, and never throwing tools away, and it has over time made my life a lot easier.
Key thing to take note of though, there are two strips of adhesive that are holding tight to the battery, and in between them is the display cable. It is easy to go too far and cut the cable if you try to hurry. Take your time, and be patient, don't go too far on either side, and use a playing card to try to cut through the adhesive slowly, and you'll be fine.
-
@potet You also totally called it on the libertine container. That is now working perfectly after I removed the old container and created a new one.
-
@Count042 Bluetooth has an intermittent hangup. Not solved yet. Toggle the switches and reboot. It will come back up at some point.
-
Hi all, I have received another nexus 6p to try and followed all the steps, but this time in Ubuntu 20.04.1. Worked straight off, so thank you for all your help. I have noticed the installer has updated to 0.5.5-beta. (I am using the Stable release). Thanks again and keep up the good work.
-
@Flohack I have noticed something for a while now. I have a flipcase to my phone. While I'm not able to wake the phone when open the flipcase, it turns on the screen if there is something happpening, like an alarm or an incoming call. I haven't seen any response on this so I just wanted to share my experience.
-
@Rondarius Hmm thats interesting, is it a magnetic flipcase?
BR
