Sony Xperia 10 (kirin)
-
@hengyedev i have receive an update of UT by OTA. Have you tested? Is it works? How i install this update, in telegram he talk to UT recovery but it doenst work for me.
-
I seem to be having quite a different experience with the build than is stated at the start of this thread. So rather than making a million different posts, I have instead compiled a similar status list. I hope this can help the developer(s) to improve this port of Ubuntu Touch.
I am running a I3113 model in Britain (if that makes any difference). These results are only from a couple of days of running the OS.
Working
• Actors: Manual brightness
• Camera: Photo
• Camera: Switch between back and front camera
• Endurance: Battery lifetime > 24h from 100%
• GPU: Boot into UI
• Lights
• Misc: Battery percentage
• Misc: Offline charging
• Misc: Online charging
• Misc: Shutdown / Reboot
• Network: Flight mode
• Network: WiFi
• Sensors: Rotation
• Sensors: Touchscreen
• Sound: Earphones
• Sound: Loudspeaker
• Sound: Microphone
• Sound: Volume control
• TorchUntested
• Endurance: No reboot needed for 1 week
• GPU: Hardware video decoding
• Misc: Reset to factory defaults
• Misc: RTC time is used after reboot
• Misc: SD card detection and access - only for devices that support it
• Network: Hotspot
• Sensors: GPSNot Working
• Actors: Vibration
• Battery charging indicator
• Camera: Video
• Cellular: Carrier info, signal strength
• Cellular: Data connection
• Cellular: Incoming, outgoing calls
• Cellular: MMS in, out
• Cellular: PIN unlock
• Cellular: SMS in, out
• Cellular: Change audio routings
• Cellular: Voice in calls
• Network: Bluetooth
• Sensors: Automatic brightness
• Sensors: Fingerprint reader
• Battery indicator when charging
• Libertine
• USB: MTP accessIt can't seem to detect my SIM card (which is working, as I have tested the SIM in other phones). Could anyone help me to get the phone to recognise the SIM card, I'm not actually sure how to get to SIM settings, and only know that it doesn't detect it from the Phone app.
I hope this information helps!
-
@adlinux try goliath51's config change to get SIM working.
-
@golliath51 there's no android9 recovery for this device currently.
-
@hengyedev Thanks, I'll give it a go!
I do have another question though: When I followed the initial installation guide you posted (it was very useful by the way, thank you) you said to flash the latest flashable artefacts. I chose to flash the one numbered as #1012205941 as it is the latest one that is just labelled 'flashable'.
However, there do appear to be more recent versions. I just wanted to ask what some of the terms used mean.
The latest version as of today is #1033922516, which is labelled as 'devel-flashable_mermaid'. I assume 'devel' is short for 'development', but what are you referring to when you say 'mermaid'? Or 'pioneer'? Which I have seen in other builds?
-
@adlinux In file deviceinfo_{version} you can check to what belongs. I have I4113 (dual sim). For Xperia 10 flash devel-flashable ( https://gitlab.com/ubports/community-ports/android9/sony-xperia-10/sony-kirin/-/jobs/1033922508/artifacts/download)
For cellular and bluetooth to work you need to apply mentoined above modifications.
-
Hello.
I would like to have ubuntu touch on my Sony Xperia 10 (I4113). But my first attempt was not successful. After rebooting there was only Sony logo on the screen and the device does not accept any button touch. Fortunately, I had another attempt. I was successful with flashing back Android 9 on the phone. So, I decided ask for an assistance here. Could anyone explaine to me where I made any mistake?
My process: 1. Downloading I4113_StoreFront_1319-3402_53.0.A.6.92_R1A from XperiFirm 2. Flashing ROM by newflaher. (I use newflasher, because Flastool had warn message: No partition delivery included“) 3. Unlocking bootloader (following steps on Sony websites) 4. Downloading latest artifacts devel-flashable_mermaid 5. Formating user data (fastboot format:ext4 userdata) 6. Going to TWRP (fastboot boot twrp.img) 7. Choosing the A slot 8. Flashing Ubuntu (fastboot flash boot_a boot.img and fastboot flash system_a system.img) 9. Rebooting (fastboot reboot)and there was only Sony logo on the screen as I wrote before.
Do I have wrong Android 9 ROM? Is it necessary to delete all .ta files from Android ROM when I use newflasher (as I saw on youtube where someone showed how to fix „No partition delivery included“ error on Flashtool. He deleted all .ta files and used newflasher)? Or do I have an error on any command? Or Do I miss something else?
-
@becherekmg It seems that removing .ta files helps. Now ubuntu starts running. But when I want to select my native language, the screen stucks at grey color. I suppose I did not flash ubuntu correctly. Which mode is necessary? For boot.img fastboot mode I suppose. But for system.img? I used fastboot mode too, because flash mode ends with error (command not authenticated), but fastboot mode has 5 steps only whereas flash mode has 24 steps
-
@becherekmg Please look on my comment above. Check deviceinfo_{version} file. Will tell you what artifacts use. I your case download devel-flashable. You are flashing wrong and thats why u see gray screen.
kirin - Xperia 10
mermaid - Xperia 10 Plus
pioneer - Xperia XA2 -
@akikyo Thanks. That's it. I have flashed ubuntu successfully now
-
This is going to be my first time flashing a custom rom onto a phone once the phone I ordered for this comes in.
I just have one question. Ubiports site has anbox checked as working for this phone, however this forum says it is not for this device. Which is it?
-
sorry for replying to a specific person on accident lol
-
@jhackler The kernel has been patched for Anbox but it does not run successfully (it crashes the UI).
-
@hengyedev sad day lol I was thinking of making it my daily driver when it comes in, however clocking in and out at work requires ukg workforce app. Only android app I have to use
-
@akikyo Oh I see, those are the codenames for the 10 plus and XA2.
-
do the post I see about the custom cofig for dual sim to get network working still apply, or is that covered by there being a separate mermaid image?
-
Hello, I have the similar problem with my device as described in this theme (shortly: some troubles with calling. and I have changed ril_subscrition.conf as mentionted above). Does anyone know that solution may be relevant for my device (Xperia 10 dual sim)? And if does, could I really type on terminal
sudo ubports-qa install xenial_-_fix-end-call? Namely I am afraid, I could destroy the system. I am not sure, that the ubuntu version I have supports such a solution. -
@becherekmg I don't have my phone yet to try touch, however from reading the linked thread that seems to have been a patch in 2018 that should, I assume, have already been mainlined into current release. That said, if that package is in the repo could always make a back up image of phone then install it and see what happens. If it gets worse uninstall. Worst case you flash you backup image.
-
@jhackler keep in mind I don't know if it was just seems weird to have found a fix 2 years ago and not have made it's way into a release yet lol
-
@jhackler a patch in 2018 that should, I assume, have already been mainlined into current release. So do I. But I think that it is interesting the phone has the same problem. However I have more troubles than that. I am not able to receive any files by bluetooth, I can share sounds only. I am not able to download any picture from TELEports (or Telegram) and the phone rebooting instead of shutting down sometimes. I am about to flash another Android 9 to try if it helps me. Maybe I have problems with drivers. My syslog has over 19MB and contains nonsensical dating. Logs from 8th March are between logs from 30th March, logs from 7th are between logs from 29th March etc. Do you think, could it be caused by "bad" Android version on my phone? Or is it just all about looking for solutions in ubuntu? Thanks for any advice...
