It works OK except video recording and GPS ...

Keneda · 19 Aug 2021, 16:18

@cr9c
First GPS fix after a cold boot takes long, and be sure to do it in wide open space under direct sky, it's not device specific, it's because there is no A-GPS on uTouch.

Luksus · 19 Aug 2021, 21:01

@cr9c said in It works OK except video recording and GPS ...:

You proposed me to download last build ... is it the same URL [ https://gitlab.com/luksus42/fairphone_fp3/-/jobs/artifacts/halium-10.0/download?job=devel-flashable ] you gave in the post "Fairphone 3/3+ (FP3/FP3+) Port - Halium 10" ?
And when you says I've to reflash system.img ... will it erease configuration (apps and parameters) on my phone (I don't care about data since everything is in "the air" ... thanks to Nextcloud) ?

Yes, the link represents always the latest build.
And no, flashing system image will not erase configuration (if you did not make rootfs writeable and did some hacky stuff) and you do not have to reinstall anything.

Waydroid (Anbox)
What's the purpose of it ?

It is an android (lineage OS) container, where you are able to run your favorite android apps (without google play services though)... watch this: https://www.youtube.com/watch?v=-mDiOrrFCgU

Openstore APP

InstantPho has some issues for me but starts and I am able to load an image, but then the image is not shown on editing... I don't think its device specific.
Both Keeweb apps work for me...

You could try to install the Logviewer and watch the applogs.
Perhaps open a new thread in the forum to discuss this specific issue.

Notifications

from Dekko 2, there're not always on .. I have to open app to reactivate notification at least once a day.

Yes, I also encountered that Dekko notifications are "lazy" somehow. in the last time.. I also think that this is not device specific. Perhaps something changed in the energy-management which prevents some services to wakre up from sleep... I don't know.

Keneda · 19 Aug 2021, 22:26

@luksus said in It works OK except video recording and GPS ...:

InstantPho has some issues for me but starts and I am able to load an image, but then the image is not shown on editing... I don't think its device specific.

Yes it's a general issue related to uTouch QT migrated to 5.12.

Luksus · 20 Aug 2021, 08:59

@cr9c regarding OpenStore Apps:

It seems that some webapps are using old webengine libraries. Today I wanted to use the HandyTicket web app and it crashed immediately on start.

The log says something about Oxide, which is not supported anymore, actually since a year or something...
(When I think about it, I believe I did a rebuild in the past of that app :face_with_raised_eyebrow: )

ConverseJS works, at least it starts.

cr9c · 20 Aug 2021, 16:25

@luksus said in It works OK except video recording and GPS ...:

And no, flashing system image will not erase configuration (if you did not make rootfs writeable and did some hacky stuff) and you do not have to reinstall anything.

Hi @Luksus
Aïe aïe aïe ... I did flash system.img but now impossible to reboot !
First screen is "Fairphone .. Powered by android" then message saying boot is unlocked ... and again "Fairphone .. Powered by android" and it's happen nothing more !!!!

Have you any idea at this point ?

cr9c · 20 Aug 2021, 17:26

I flash previous released which were OK (I've kept it) and it's OK again.
So @Luksus I'm sorry but your last system.img isn't OK for my phone !?

Luksus · 22 Aug 2021, 19:02

@cr9c thanks for the Info I will have a look...

cr9c · 24 Aug 2021, 07:54

Hi @luksus
For info, since flash of previous system.img .. it's quite strange because "Gallery" app and "Weather app" app don't work any more.
They crash as soon they're launched !?

Luksus · 24 Aug 2021, 09:41

@cr9c you could try to clear cache of that apps with the UT Tweak Tool. As we are using the devel channel for the builds, things may change from one to another build...

cr9c · 24 Aug 2021, 10:20

@luksus said in It works OK except video recording and GPS ...:

you could try to clear cache of that apps with the UT Tweak Tool

Hi @Luksus ... I did try it and no effects. I also remove apps and reboot but nothing to do !? and the pb comes only with these 2 apps .

Luksus · 24 Aug 2021, 11:38

@cr9c I don't understand what is going on...
I just did a rebuild and installed that build, from the link I provided to you. Everything is fine.

What do you mean with

and the pb comes only with these 2 app

?

Did you use the ubports-installer in the meantime? (I hope not, because it is not recommended for FP3+ users, if you did, it would be needed to reflash the android 10 vendor partition)

cr9c · 24 Aug 2021, 18:49

@luksus said in It works OK except video recording and GPS ...:

Hi @Luksus,
And again thanks for your concern.

from the link I provided to you. Everything is fine

The build with this link is Not OK as I detailed above and I don't know why since I followed the same procedure as you gave and I use the first time with the previous build.
No I don't use UB port installer, I use "fastboot"

... and the pb comes only with these 2 app ...

I meant everything is OK with your previous build I've kept and also all apps I kept, except with the two apps I gave.

Luksus · 2 Oct 2021, 18:39

@cr9c Ok, that is strange. I don't know why your device is behaving so differently than mine.

cr9c · 2 Oct 2021, 18:39

Hi @luksus
For info OpenStore app doesn't work for few days even after clearing cache
Best wishes.

Luksus · 3 Oct 2021, 13:08

@cr9c Thanks, it seems to be a common issue with Open Store currently.

Keneda · 3 Oct 2021, 19:04

@luksus
No issue here on MX4.

Luksus · 3 Oct 2021, 19:11

@keneda For me neither, on FP3. But some people were talking about it in the UBports Telegram channel.

cr9c · 11 Oct 2021, 10:53

Hi @Luksus ,

Since my last update were end of august with your build, I'd like to know if you've update your build which can be download here ?

https://gitlab.com/luksus42/fairphone_fp3/-/jobs/artifacts/halium-10.0/download?job=devel-flashable

After two months with UBPort on my FP3+ I must say I'm in a hurry to try your final one ;o)

Thanks again.

Luksus · 10 Nov 2021, 11:08

@cr9c Oh, meanwhile you could just install the latest build with the ubports-installer (let "wipe" unchecked).
https://devices.ubuntu-touch.io/device/fp3/
And after that you can use the OTA updates (go to System-Settings->Updates).

cr9c · 11 Oct 2021, 11:13

In fact @luksus I did try the ubports-installer (following your others posts) with "wipe" unchecked and it didn't work.
I tried three time and no success .. I always have an error message ... it's why I wanted to set up last update through terminal

I guess it will help you if I post the error message, righ ? I'll do it as soon as I go back to my place.