Call for testing: Ubuntu Touch Focal OTA-4

peat_psuwit

@Sander-Klootwijk said in Call for testing: Ubuntu Touch Focal OTA-4:

@peat_psuwit said in Call for testing: Ubuntu Touch Focal OTA-4:

This is weird. Please get the result of command upower -d, executed either via ADB, SSH, or the Terminal app.

This is the output, while charging my phone: https://pastebin.ubuntu.com/p/GGQKnC8YKn/

Sadly, I can't find any interesting information from this. If you could help, could you please get the output of command gdbus introspect --system --dest org.freedesktop.UPower --object-path /org/freedesktop/UPower/devices/DisplayDevice?

This is also weird, and I can't reproduce this - although my phone is originally set to English. Could you please get content of file ~/.pam_environment and file /etc/default/locale, and also the output of command locale? Again, this can be done via ADB, SSH, or the Terminal app.

These are the results with the system language set to English (US).

<snip>

And for this, please help me get additional information. To avoid getting too much clutter, please follow these steps in this order:

Go to System Settings > Language & Text > Display language, so that you're in the language chooser. Don't choose a language yet.
Over ADB or SSH connection, run the command sudo dbus-monitor --system sender=org.freedesktop.Accounts destination=org.freedesktop.Accounts. The command will output a few lines, and then wait for more.
Choose a language and confirm, so that you're asked to reboot. Command in 2.) will output a lot more. Press Ctrl + C to stop waiting for more output.
You can now reboot the phone. Please send the output from 2.).

@vince-vs said in Call for testing: Ubuntu Touch Focal OTA-4:

@Sander-Klootwijk write :
I encountered a weird bug: when changing the system language from Dutch to English, the system is partly in Dutch and partly in English. After a second reboot, this issue still persists. .....
I reply : same problem for me, in my case in French ...
Sincerly

Could you please also follow the steps from above to collect more information?

lduboeuf

@Sander-Klootwijk write :
I encountered a weird bug: when changing the system language from Dutch to English, the system is partly in Dutch and partly in English. After a second reboot, this issue still persists. .....
I reply : same problem for me, in my case in French ...
Sincerly

Could you provide some contexr: device, have you started on Focal with a clean install, or from 16.04 to 20.04 and maybe came back to 16.04 for some time, did you have used apt install or some random commands that may write to the device ?

domubpkm

Volla. I'm still on OTA-3, not rc. But is it normal to see this when I use a French keyboard ? Bug ? known or corrected in rc test OTA-4 ?

kristatos

@domubpkm I've observed this since I'm on focal. On Xenial it has worked like expected and since focal the keyboard-quickmenu is always "English".

vince.vs

@peat_psuwit
Hello,
Unfortunately, I don't have time to deal with this this week, and I'm a bit reluctant to dig deeper into my only phone that I use every day.
To rectify, on my OPT5, my version is in French, but on the home screen, there is still the information: "No text message received today" (so in English), but the date and time and the rest are in FR.
I should point out that in the system settings, there are several items that are still in English while the main one is in French; I've noticed that it's not only on UT that this sort of thing exists, because on a Linux distribution with, for example, KDE, Gnome, etc, it happens that there are still some indications (by default) in English, while a previous version was mature and well translated...
Have a nice day

vince.vs

@lduboeuf
Hello,
Yes, I first went from 16.04 Xenial to ota-1 20.04 Focal, and following various problems, I reinstalled focal directly with Ubports installer.
Best regards

Sander

@peat_psuwit said in Call for testing: Ubuntu Touch Focal OTA-4:

Sadly, I can't find any interesting information from this. If you could help, could you please get the output of command gdbus introspect --system --dest org.freedesktop.UPower --object-path /org/freedesktop/UPower/devices/DisplayDevice?

Here is the output: https://pastebin.ubuntu.com/p/BnHxXdsPRX/

And for this, please help me get additional information. To avoid getting too much clutter, please follow these steps in this order:

Go to System Settings > Language & Text > Display language, so that you're in the language chooser. Don't choose a language yet.

Over ADB or SSH connection, run the command sudo dbus-monitor --system sender=org.freedesktop.Accounts destination=org.freedesktop.Accounts. The command will output a few lines, and then wait for more.

Choose a language and confirm, so that you're asked to reboot. Command in 2.) will output a lot more. Press Ctrl + C to stop waiting for more output.

You can now reboot the phone. Please send the output from 2.).

I've once again changed the display language from Dutch to English (US). This is the output of the command: https://pastebin.ubuntu.com/p/bsjsPMqRVB/

peat_psuwit

@domubpkm said in Call for testing: Ubuntu Touch Focal OTA-4:

Volla. I'm still on OTA-3, not rc. But is it normal to see this when I use a French keyboard ? Bug ? known or corrected in rc test OTA-4 ?

The keyboard in the quick settings is supposed to mean "physical keyboard", when one is connected via e.g. Bluetooth or USB-OTG cable. If there isn't one connected, the keyboard layout shouldn't show. This is a known issue to us, but for some reason didn't have an issue filed. I've filed one, so that we don't lose track of it: https://gitlab.com/ubports/development/core/packaging/ayatana-indicators/ayatana-indicator-keyboard/-/issues/7

That said, while we appreciate all issue reports, in the future, please refrain from reporting an issue which is known to happen on an earlier OTAs of Ubuntu Touch in a "call for testing" thread of the next OTA. The purpose of the "call for testing" is to catch a regression - an unexpected breakage that happens from changes in this OTA - to avoid shipping them to the end users. For a general issue reporting, please report issue at our issue inbox at https://gitlab.com/ubports/ubuntu-touch. Sorry your inconvenience.

@Sander-Klootwijk said in Call for testing: Ubuntu Touch Focal OTA-4:

@peat_psuwit said in Call for testing: Ubuntu Touch Focal OTA-4:

Sadly, I can't find any interesting information from this. If you could help, could you please get the output of command gdbus introspect --system --dest org.freedesktop.UPower --object-path /org/freedesktop/UPower/devices/DisplayDevice?

Here is the output: https://pastebin.ubuntu.com/p/BnHxXdsPRX/

Thank you for your info. The output seems to indicate that our battery software (UPower) is unable to figure this information from what your device's kernel provide. Unfortunately, debugging this issue further requires more information than we can communicate via this forum post, so please file an issue at your port's issue tracker so that your port's porter can have a look.

And for this, please help me get additional information. To avoid getting too much clutter, please follow these steps in this order:

<snip>

I've once again changed the display language from Dutch to English (US). This is the output of the command: https://pastebin.ubuntu.com/p/bsjsPMqRVB/

Meanwhile, this one reveals some interesting information. And with more information from @vince-vs, I've revealed some more information even if I can't completely reproduce the issue just yet. A quick question: are you also upgrading from Xenial or this is a clean install (or with wipe) of Focal?

That said, with the information we have, it's likely that this could have been the case since OTA-3 or earlier. As such, we will continue our investigation in the issue here: https://gitlab.com/ubports/ubuntu-touch/-/issues/2175

domubpkm

@peat_psuwit Thanks for clarifying the bug as I probably wasn't the only one in the dark.

stefan_hdb

Hello everybody,

I use an Xperia X Suzu, which was running fine with UT 20.04 (2023-W44), i.e. Release-Channel. I switched to Development-Channel, downloaded, and pressed "Install". Which ended in a message "Installation failed. Please reboot." Which I did, resulting in a system start. Surprisingly the "System"-section shows, that UT 20.04 (r852) is the current OS, under details the device image is shown as 20240111-31815. It seems that the update was done, despite the error message.

As far as I can see, all apps work, in particular the Morph browser. Camera, ADB and change of PIN works, too, as well as WLAN and BT. Currently I do not use phone calls in this device, so no testing in that respect.

I returned to the release-channel, installed the previous version, which worked and showed the earlier entries under system information. Then I started the update a second time with the a.m. result.

Hope this helps. Thanks for your ongoing work!
Stefan

peat_psuwit

Update: the new RC has been pushed, with regression fixes for apps that embed web browser and for Xperia X. Please have another go at RC. Thank you.

Sander

@peat_psuwit said in Call for testing: Ubuntu Touch Focal OTA-4:

Thank you for your info. The output seems to indicate that our battery software (UPower) is unable to figure this information from what your device's kernel provide. Unfortunately, debugging this issue further requires more information than we can communicate via this forum post, so please file an issue at your port's issue tracker so that your port's porter can have a look.

I will do that!

A quick question: are you also upgrading from Xenial or this is a clean install (or with wipe) of Focal?

This is a clean install, with wipe, of Focal. If I remember correctly I did switch between stable, developer and RC channels since I used the installer, but it has not been updated directly from Xenial.

TakoR

@peat_psuwit

Thanks for this. I got the update. I still have the WiFi bug that I have been experiencing in my Xperia X with the OTA-3. Here's the link for reference. What happens here is that when I connect to WiFi, I would immediately get the prompt connected while the WiFi icon won't be fully coloured white. It would just show the 3 dots in it. After around 2 minutes, it would ask me to enter the password again. It has been like this since OTA-3 but I choose not to go back to Xenial because of the night-and-day performance. It would be nice to get some workaround to this. I didn't have this bug when I forced OTA-2 on mine, even though it wasn't supported yet at that time. Cheers.

ancientsounds

@peat_psuwit

First batch of tests on a OnePlus 6T. (I will test some of the other issues identified in this thread later)

The ability to use ADB with the phone (we've added restored prompt system).

Yes, that works. Pops up "Allow USB Debugging?" as advertised.

If your ringtone settings are still effective across updates.

Yes, same as before.

Whether the permission request works for a new app

Prompts for permission on a new app that wants access to restricted parts of the system (e.g. Battery Saver app), but not for new apps that don't (e.g. Guess Words)

If you can still change your PIN and/or passphrase in the System Settings:

Changing Passcode (PIN) works fine. Passphrase not tested.

Browse your everyday websites with Morph

Browser: Seems fine.

For Waydroid users, see if Waydroid still works for you.

Seems OK.

ancientsounds

@lduboeuf How is it set? I can't find it in System Settings

lduboeuf

@ancientsounds said in Call for testing: Ubuntu Touch Focal OTA-4:

@lduboeuf How is it set? I can't find it in System Settings

Talking about the DT2W ? If it is not visible under "Gesture", then your device does not support DT2W

ancientsounds

@lduboeuf OK thank you. It's a OnePlus 6T, and I can't see such a setting under Gestures, so presumably this phone does [EDIT: not] support it

ancientsounds

@peat_psuwit
More tests on OnePlus 6T:

lock screen now shows the estimated time to charge your phone:

No, it doesn't. Toggled the checkbox in setting, but that makes no difference

Theme switching now built-in

"Enable dark mode" in system settings works without having to reboot.

For developers: connecting your phone to new a computer now asks for confirmation

Yes, that works

bug fixes:
messaging-app · start in landscape: compose bar not shown
https://gitlab.com/ubports/development/core/messaging-app/-/issues/340

This is fine on OP6T (but perhaps it was not a bug before?)

ancientsounds

@Sander-Klootwijk said in Call for testing: Ubuntu Touch Focal OTA-4:

I encountered a weird bug: when changing the system language from Dutch to English, the system is partly in Dutch and partly in English. After a second reboot, this issue still persists. When changing back to Dutch, the entire system (apart from some untranslated strings) is in Dutch again. I've also tried other languages and there is still a mix-up with Dutch.

I tried to reproduce this by switching to French. Some of the text remains in English even though a lot of it has changed to French. E.g.
"No text messages sent today" on the splash screen circle,
In system settings, "Flight Mode", "Rotation Lock", "Background & Appearance", and "Reset" are in English (the rest in French). Some of the app names remain in English although others are in French. (Perhaps this is down to the individual app's coding)

arubislander

@ancientsounds
The issue that is being reported here is not when switching from English to another language. This could simply be due to untranslated strings.

The issue mentioned is when switching from another language back to English, where some strings remain translated to the non-English language.