@Moem clearly as fore mentioned, i lack knowledge in quite a broad area so your boyfriend's abruptness seemed a bit like a tone problem which he kindly popped back in and commented on

ok

@Moem clearly as fore mentioned, i lack knowledge in quite a broad area so your boyfriend's abruptness seemed a bit like a tone problem which he kindly popped back in and commented on

ok

@moaner incase anyone else on a newb level has a similar issue for whatever reason here is
what i encountered in my ignorance when trying to get ubuntu touch on a oneplus nord n100...

following tutorials using fastboot in linux, i missed that the 10.5.2 unbrick tool is native to windows
and on establishing that having bricked the phone into qualcomm crash dump mode (using a .img file from the xda forum via fastboot/adb in linux terminal) I found that to power off the phone and get it in edl mode the cable had to be detached to prevent a boot loop.

Powering off the phone in the stock fastboot mode without the usb cable attached enabled edl mode to be recognised in the windows 11 unbrick tool from the stock 10.5.2 msm download tool v4.

if in a boot loop the usb cable needs to be detached and the power off option from the stock fastboot menu needs to be used to power down to then hold the volume up & down keys to get the device into edl mode and flash the stock rom. (oneplus_nord_n100_eu_oxygenos_10.5.2.zip)
(The MSM download tool needs to be run as administrator in windows)

(And as an aside, google play needs to get network access before oem unlocking can be switched on).

Then due to qualcomm driver issues (although they need installing in windows 11), the device won't show in fastboot mode (or didn't for me) so the bootloader unlocking needed to be done in linux and although it said waiting for device, by powering into fastboot mode (hold vol up and power), the bootloader unlock menu appeared which it didnt for some reason in windows.)

Then in ubports i think stalling the install when the orange robot recovery menu appears on the phone by disconnecting the usb cable, then allows for going into the advanced menu options and enabling adb and then reconnecting the usb cable, helps enable a functional installation.

Having gone round in loops several times, this is what got me the successful installation on my 2013 Nord N100.

@Keneda

why are you being bossy

i'm on a trial and error endeavor here with all manner of effort rendered as minimal progress.

for the record i command prompt unlocked it again and it works ok.

@MrT10001 It's working now by some fluke it lost connection and ubports was looking for abd device so I put it in adb mode via the ut recovery menu and it updated and now boots into ut. I tried locking it to get rid of the nag screen but it wouldnt then boot at all, saying something was corrupt.

Cheers for your help, I'd given up otherwise

@MrT10001 & yeah i wiped the cache before re flashing ut

@MrT10001

Thanks for getting back, since you said that, I downloaded the 10.5.2 from the link under the 'how to install touch os' from the https://devices.ubuntu-touch.io/device/billie2/ page just incase different from the ubports link to the oneplus community unbrick archives and it's the same either way.

Recovery mode says port a. 'The boot loader is unlocked" screen stays on without booting into ut
although volume up & power pass through that screen into ubports recovery and same from there into fastboot

Thanks again

Re: For newbies please read.....

Hello I'm a newb and I've been going round in a loop trying to use ubports to get ut on my oneplus
nord n100 BE2013 EU.

Essentially having flashed the phone to android 10.5.2 and unlocking it with fastboot flashing unlock,
the ub ports installer says it has successfully installed ubuntu touch on the device however it never
loads past the "the bootloader is unlocked and software integrity cannot be gauranteed" nag screen.

I have reflased a few times and keep ending up in the same state so any advice would be helpful.

Thank you