Misunderstanding about ubuntu touch on Nexus 7

zlamalp

so to put it together I should:

Get Ubuntu 16.04
Install required packages so following commands are available
Run following commands

ubuntu-device-flash touch --channel=ubuntu-touch/stable/ubuntu --device=flo --bootstrap
# Reboot into bootloader
fastboot flash -w boot boot.img
fastboot flash -w recovery recovery.img
# Boot into recovery
ubuntu-device-flash --server http://system-image.ubports.com touch --channel ubuntu-touch/rc-proposed

But I'm not sure which channels etc. to use. I believe something like this would be more appropriate:

ubuntu-device-flash --server http://system-image.ubports.com touch --channel ubuntu-touch/stable --device=deb
fastboot flash -w boot boot.img
fastboot flash -w recovery recovery.img

NOTE: boot.img and recovery.img should be taken from the @zubozrout G-Drive: https://drive.google.com/file/d/0B_T_rjYvwUdgQ3RJMHhSLWVvY0E/view?usp=sharing

doniks

@zlamalp no, that doesn't sound right. A UT installation consists normally of the following four pieces

boot image
recovery
system image (device independent)
android container

the steps you propose do nothing to get the deb android container. here are the steps I used: https://github.com/ubports/ubuntu-touch/issues/643 in Workaround.

Some more nitpicking:

I'm not sure in which version of Ubuntu the ubuntu-device-flash tool is available. I painfully realized that at some point it wasn't available in my version (probably 18.04). This might have been resolved, but good to check
It makes no sense to use --server one time, but not the other. Either your version of ubuntu-device-flash always goes to Ubports server by default, then you're good. Or it never goes there by default, then you always need to specify
wrt channel - if you don't know which one you want, then you want stable

dobey

@doniks said in Misunderstanding about ubuntu touch on Nexus 7:

I'm not sure in which version of Ubuntu the ubuntu-device-flash tool is available. I painfully realized that at some point it wasn't available in my version (probably 18.04). This might have been resolved, but good to check

The tool is available in 16.04 in the Ubuntu archives, and there is a build for 18.04 in the ubports repository (https://repo.ubports.com/) which can be used.

Stefano

@dobey I thought that u-d-f doesn't work on 18.04, I couldn't install it, any particular package to install? Could you clarify what build to use, as I can't find any. Thanks.

doniks

@zlamalp said in Misunderstanding about ubuntu touch on Nexus 7:

ubuntu-device-flash --server http://system-image.ubports.com touch --channel ubuntu-touch/stable --device=deb

Actually, after reading your post again I realize ... if this command works, you should be done.

zlamalp

Thanks @doniks I'll see if that works if I get the device.

dobey

@stefano said in Misunderstanding about ubuntu touch on Nexus 7:

@dobey I thought that u-d-f doesn't work on 18.04, I couldn't install it, any particular package to install? Could you clarify what build to use, as I can't find any. Thanks.

The latest ubuntu-device-flash package for your architecture from https://repo.ubports.com/pool/bionic/main/g/goget-ubuntu-touch/ should work on 18.04.

Stefano

@dobey I tried to install, it says installing,but won't install. Really strange. It's normal .deb amd64 package and it just won't work. Never mind, my wife is on 16.04, so I just keep flashing it on her laptop. Thanks for the help anyway.

zubozrout

@stefano Probably the best to add the repo to your system and use it from there. Did you try that?

echo "deb http://repo.ubports.com/ bionic main" | sudo tee /etc/apt/sources.list.d/ubports.list
wget http://repo.ubports.com/keyring.gpg -O - | sudo apt-key add -

and then

apt update
apt install ubuntu-device-flash

Stefano

@zubozrout W: GPG error: http://repo.ubports.com bionic Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4BD4B4D6DBB583F1
E: The repository 'http://repo.ubports.com bionic Release' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

Stefano

@zubozrout @dobey I found this and managed to install it. I know it's for 14.04, but somehow it work, don't really know what I've done. I played with aptitude and get the public.key from ubports, it still said that click-ubuntu-policy is missing and has no installable candidate. Anyway, now it just successfully flashed my Pro5 with latest Stable release. I'm over the moon
this is what I've done;

echo "deb http://repo.ubports.com/ bionic main" | sudo tee /etc/apt/sources.list.d/ubports.list

wget https://repo.ubports.com/pubkey.gpg
--2019-01-18 10:36:36-- https://repo.ubports.com/pubkey.gpg
Resolving repo.ubports.com (repo.ubports.com)... 104.24.1.9, 104.24.0.9, 2606:4700:20::6818:9, ...
Connecting to repo.ubports.com (repo.ubports.com)|104.24.1.9|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 1702 (1.7K)
Saving to: ‘pubkey.gpg’

pubkey.gpg 100%[===================>] 1.66K --.-KB/s in 0s

2019-01-18 10:36:36 (10.3 MB/s) - ‘pubkey.gpg’ saved [1702/1702]

stefano@stefano-Inspiron-13-5378:~$ sudo apt-key add - < pubkey.gpg
OK
sudo apt update

then just download this package and install it:http://de.archive.ubuntu.com/ubuntu/pool/universe/g/goget-ubuntu-touch/ubuntu-device-flash_0.2+14.04.20140416.2-0ubuntu1_amd64.deb
all done and ready to flash UT on 18.04 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Thanks you guys for your help, you rock!

doniks

@zlamalp said in Misunderstanding about ubuntu touch on Nexus 7:

Thanks @doniks I'll see if that works if I get the device.

Hey @zlamalp how's it going? Did you ever get that deb? The image has just been fixed and we could do with testers that have a deb ...

zlamalp

Hi @doniks,

sorry, I wasn't able to get one. Everybody is selling older model with Tegra chip.

doniks

@zlamalp too bad