Need help in porting Halium/Ubports to Galaxy S4 jfltexx

r-H3R0

Hello,
i need help in porting Halium (Ubports is the next part after Halium works) so I got an output:
[mka hybris-boot](https://pastebin.com/Kr420s4d
mka halium-boot
Can anyone help me?
Thanks for your help.

doniks

@r-h3r0 kernel doesn't seem to compile.

e.g., error: 'mipi_samsung_disp_get_power' undeclared here

Maybe best if you build lineageos first. Just as a stepping stone to make sure everything is in place for you to build the kernel. No config changes, no changes at all, just build as los describes.

I guess the alternative would be to poke around in the code and try to figure out why it doesn't compile.

(For reference, I take it this is your porting issue, which shows your manifest : https://github.com/Halium/projectmanagement/issues/59 )

Another small practical tip that helped me with pinning down build errors: do make -j 1 instead of mka because then it just builds one thing at a time, which might help with tackling the build failures one by one.

hsabun

Hi friend any progress.

suoko

I'm trying compile with this error:

BUILD_ID=NOF27B
OUT_DIR=/home/admin/halium/out
============================================
frameworks/av/camera/cameraserver/Android.mk:18: Target has integrated cameraserver into mediaserver. This is weakening security measures introduced in 7.0
halium/hybris-boot/Android.mk:69: ********************* /boot appears to live on /dev/block/platform/msm_sdcc.1/by-name/boot
halium/hybris-boot/Android.mk:70: ********************* /data appears to live on /dev/block/platform/msm_sdcc.1/by-name/userdata
hardware/samsung/AdvancedDisplay/Android.mk:34: frameworks/base/packages/SettingsLib/common.mk: No such file or directory
make: *** [build/core/ninja.mk:167: /home/admin/halium/out/build-lineage_jfltexx.ninja] Error 1
make: Leaving directory '/home/admin/halium'

using this manifest:

<?xml version="1.0" encoding="UTF-8"?>
<manifest>
    <project path="device/samsung/jfltexx" name="android_device_samsung_jfltexx" remote="los" revision="cm-14.1" />
    <project path="device/samsung/jf-common" name="android_device_samsung_jf-common" remote="los" revision="cm-14.1" />
    <project path="device/samsung/qcom-common" name="android_device_samsung_qcom-common" remote="los" revision="cm-14.1" />
    <project path="hardware/samsung" name="android_hardware_samsung" remote="los" revision="cm-14.1" />
    <project path="packages/resources/devicesettings" name="android_packages_resources_devicesettings" remote="los" revision="cm-14.1" />
    <project path="vendor/samsung" name="proprietary_vendor_samsung" remote="them" revision="cm-14.1" />
    <project path="kernel/samsung/jf" name="android_kernel_samsung_jf" remote="los" revision="cm-14.1" />
</manifest>

suoko

CHK     include/generated/utsrelease.h
make[2]: 'include/generated/mach-types.h' is up to date.
CALL    /home/admin/halium/kernel/samsung/jf/scripts/checksyscalls.sh
CHK     include/generated/compile.h
GZIP    kernel/config_data.gz
CHK     kernel/config_data.h
Kernel: arch/arm/boot/Image is ready
LD      arch/arm/boot/compressed/vmlinux
OBJCOPY arch/arm/boot/zImage
Kernel: arch/arm/boot/zImage is ready
make: Leaving directory '/home/admin/halium/kernel/samsung/jf'
[ 98% 808/819] Target boot image: /home/admin/halium/out/target/product/jfltexx/boot.img
/home/admin/halium/out/target/product/jfltexx/boot.img maxsize=10543104 blocksize=135168 total=6729744 reserve=270336
Made boot image: /home/admin/halium/out/target/product/jfltexx/boot.img
[ 98% 809/819] ----- Making recovery ramdisk ------
Copying baseline ramdisk...
Modifying ramdisk contents...
----- Making uncompressed recovery ramdisk ------
[ 99% 811/819] ----- Making recovery image ------
/home/admin/halium/out/target/product/jfltexx/recovery.img maxsize=10543104 blocksize=135168 total=9086992 reserve=270336
Made recovery image: /home/admin/halium/out/target/product/jfltexx/recovery.img
[ 99% 814/819] Construct recovery from boot
FAILED: /bin/bash -c "(mkdir -p /home/admin/halium/out/target/product/jfltexx/obj/PACKAGING/recovery_patch_intermediates/ ) && (PATH=/home/admin/halium/out/host/linux-x86/bin:\$PATH /home/admin/halium/out/host/linux-x86/bin/bsdiff /home/admin/halium/out/target/product/jfltexx/boot.img /home/admin/halium/out/target/product/jfltexx/recovery.img /home/admin/halium/out/target/product/jfltexx/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p )"
/bin/bash: /home/admin/halium/out/host/linux-x86/bin/bsdiff: No such file or directory
[ 99% 814/819] build /home/admin/halium/out/target/product/jfltexx/obj/NOTICE.html
Combining NOTICE files into HTML
Combining NOTICE files into text
ninja: build stopped: subcommand failed.
make: *** [build/core/ninja.mk:152: ninja_wrapper] Error 1
make: Leaving directory '/home/admin/halium'

#### make failed to build some targets (26 seconds) ####

advocatux

@suoko you can select all your text and click on that </> icon to make it more readable, or you can add 3 backticks (```) at the beginning and the at end of your text

Lakotaubp

@suoko Edited your post as @advocatux recommended. Hope you don't mind.

flohack

@suoko said in Need help in porting Halium/Ubports to Galaxy S4 jfltexx:

hardware/samsung/AdvancedDisplay/Android.mk:34: frameworks/base/packages/SettingsLib/common.mk: No such file or directory

This seems to be a Java application, try to get rid of AdvancedDisplay fully.

suoko

@Flohack i did it, i flashed it but now it boot loops.
No signs of ubuntu touch, it just reboots after a minute of black screen and no way to ssh into it

flohack

@suoko Did you start using the reference rootfs?

let it bootloop once, go into recovery, look for cat /proc/last_kmsg - that will give you kernel dmesg

suoko

@Flohack

~ # cat /proc/last_kmsg 
[    0.000000] Truncating memory at 0xc0000000 to fit in 32-bit physical address space
[    0.000000] sec_tsp_mode: LCD_ID = 0x408047, val: 0X408047, ret1: 0x8
[    0.036590] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[    0.059722] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059753] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059783] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059783] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059814] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059844] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059844] msm_rpm_get_status(): Status id 433 not defined for target
[    0.059875] msm_rpm_get_status(): Status id 433 not defined for target
[    0.209259] sensor_power_on_vdd: done
[    0.263061] i2c i2c-4: Failed to register i2c client imx135 at 0x10 (-16)
[    0.263305] i2c i2c-4: Can't create device at 0x10
[    0.263763] i2c i2c-4: Failed to register i2c client s5k3l1yx at 0x34 (-16)
[    0.264007] i2c i2c-4: Can't create device at 0x34
[    0.298034] ion_heap_create: Invalid heap type 3
[    0.303222] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:3 report inf element:0x0
[    0.303436] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.304138] msm_slim_ctrl msm_slim_ctrl.1: Slim-dev:4 report inf element:0x400
[    0.304473] msm_slim_ctrl msm_slim_ctrl.1: offset:0x0:bit mask:8
[    0.385742] Error-Bad Function Input
[    0.386718] Error-Bad Function Input
[    0.705566] smd_channel_probe_worker: allocation table not initialized
[    0.721649] dma_test_init, minor number 37
[    0.729095] mdm_modem_probe: registered mdm id 0
[    0.729248] mdm_do_first_power_on:id 0: Powering on modem for the first time
[    0.990509] cont_splash_clk_ctrl: dsi_esc_clk - clk_set_rate failed

suoko

Had to truncate due to false spam-detection

[    0.999847] [mdnie lite] start!
[    1.000061] [mdnie lite] end!
[    1.001800] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group df038608
[    1.002227] Inside writeback_driver_init
[    1.002471] Inside writeback_probe
[    1.006286] Unknown PM state 0
[    1.006378] Unknown PM state 3
[    1.192382] wcd9xxx_slim_probe: failed to get slimbus tabla-slim logical address: -6
[    1.261932] msm_otg msm_otg: failed to get phy_clk
[    1.431884] couldn't get usb power supply
[    1.454223] [jc_spi_init:336] Entered
[    1.454315] [jc_spi_probe:301] Entered
[    1.454498] [jc_spi_probe:311] jc_spi successfully probed
[    1.454589] jc_config_isp_irq~~~~~~~~~~
[    1.454803] msm_eeprom_probe probe_fail
[    1.459228] msm_sensor_i2c_probe s5k6b2yx probe succeeded
[    1.459320] msm_eeprom_probe probe_fail
[    1.494873] mmc0: No card detect facilities available
[    1.620819] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.621063] power_supply sec-fuelgauge: driver failed to report `status' property: 4294967274
[    1.639068] max77693_get_health_state: Fail to get psy (battery)
[    1.641784] power_supply sec-charger: driver failed to report `power_now' property: 4294967274
[    1.643585] max77693_get_health_state: Fail to get psy (battery)
[    1.646301] power_supply sec-charger: driver failed to report `power_now' property: 4294967274

suoko

g

flohack

@suoko it would be better you join @Halium group on Telegram. We dont want to overload the forum. And copy all such things into a pastebin plz...
Your log is very short. nothing that could help us. Please try to build Lineage with this manifest to verify if the kernel is at all working.

flohack

Or maybe not. You might want to do telnet debugging with the break=bottom kernel cmdline parameter.