How should I set up my environment for developing?
-
@Kanduras thank you very much
Before changing the clickable plugin code following your instructions, I wanted to be sure the ssh connection was working but I didn't succeed yet. I also tried to generate again the ssh key and push it to the phone, but no joy up to now.
In the PC terminal, if I type the commandssh phablet@<ip-address>(ip-address found typinghostname -iin the terminal), I get an error message stating that the connection is refused on Port 22.
Any recommendation about how to fix that? I know ssh is very sensible with authorizing a connection and I believe I'm just slightly off the road....Matteo
-
-
-
@lduboeuf I have Qt Creator installed on my computer. So, I was interested in setting it up with clickable. However, my computer is Debian, and not Ubuntu. Is this safe to do on Debian?
I tried, from way 0, to run the script, but stopped it midway through (see commandline stuff below) since it seemed that it was going to install a bunch of Ubuntu packages on my machine. And I wasn't running it as root, which is normally required for package installation. Odd. I stopped it before it installed all the Ubuntu things it was getting.
mark@debian:~/Templates/clickable/ut-qtcreator-master$ cd ut-qtcreator && docker build -t ut-qtcreator:base . Sending build context to Docker daemon 64kB Step 1/3 : FROM clickable/ubuntu-sdk:16.04-amd64 ---> 86c5e694130c Step 2/3 : RUN apt-get update && apt-get install -y git qtcreator libxrender1 gdb ---> Running in 31561210b835 Get:1 http://archive.ubuntu.com/ubuntu xenial InRelease [247 kB] Get:2 http://ppa.launchpad.net/bhdouglass/clickable/ubuntu xenial InRelease [17.5 kB] Ign:3 http://repo.ubports.com xenial InRelease Get:4 http://repo.ubports.com xenial Release [6317 B] Get:5 http://repo.ubports.com xenial Release.gpg [473 B] Get:6 https://deb.nodesource.com/node_10.x xenial InRelease [4584 B] Get:7 http://ppa.launchpad.net/bhdouglass/clickable/ubuntu xenial/main amd64 Packages [790 B] Get:8 http://archive.ubuntu.com/ubuntu xenial-updates InRelease [109 kB] Get:9 https://deb.nodesource.com/node_10.x xenial/main amd64 Packages [768 B] Get:10 http://repo.ubports.com xenial/main amd64 Packages [1740 kB] Get:11 http://archive.ubuntu.com/ubuntu xenial-security InRelease [109 kB] Get:12 http://archive.ubuntu.com/ubuntu xenial/main amd64 Packages [1558 kB] Get:13 http://archive.ubuntu.com/ubuntu xenial/multiverse amd64 Packages [176 kB] Get:14 http://archive.ubuntu.com/ubuntu xenial/universe amd64 Packages [9827 kB] Get:15 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 Packages [1393 kB] Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/multiverse amd64 Packages [19.3 kB] Get:17 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 Packages [998 kB] Get:18 http://archive.ubuntu.com/ubuntu xenial-security/main amd64 Packages [1005 kB] Get:19 http://archive.ubuntu.com/ubuntu xenial-security/multiverse amd64 Packages [6283 B] Get:20 http://archive.ubuntu.com/ubuntu xenial-security/universe amd64 Packages [593 kB] Fetched 17.8 MB in 11s (1486 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... libxrender1 is already the newest version (1:0.9.9-0ubuntu1). libxrender1 set to manually installed. gdb is already the newest version (7.11.1-0ubuntu1~16.5). git is already the newest version (1:2.7.4-0ubuntu1.6). The following additional packages will be installed: binfmt-support clang clang-3.8 libbotan-1.10-1 libclang-common-3.8-dev libclang1-3.8 libclang1-5.0 libffi-dev libllvm3.8 libllvm5.0 libobjc-5-dev libobjc4 libpipeline1 libqbscore1.10 libqbsqtprofilesetup1.10 libtinfo-dev libutempter0 libxft2 libxv1 libxxf86dga1 llvm-3.8 llvm-3.8-dev llvm-3.8-runtime qbs-common qml-module-qtquick-controls qt5-doc qtbase5-doc qtconnectivity5-doc qtcreator-data qtcreator-doc qtdeclarative5-doc qtgraphicaleffects5-doc qtlocation5-doc qtmultimedia5-doc qtquickcontrols5-doc qtscript5-doc qtsensors5-doc qtserialport5-doc qtsvg5-doc qttools5-doc qttranslations5-l10n qtwebkit5-doc qtwebkit5-examples-doc qtwebsockets5-doc qtx11extras5-doc qtxmlpatterns5-dev-tools qtxmlpatterns5-doc x11-utils xbitmaps xterm Suggested packages: gnustep gnustep-devel clang-3.8-doc llvm-3.8-doc kate-data subversion mesa-utils xfonts-cyrillic The following NEW packages will be installed: binfmt-support clang clang-3.8 libbotan-1.10-1 libclang-common-3.8-dev libclang1-3.8 libclang1-5.0 libffi-dev libllvm3.8 libllvm5.0 libobjc-5-dev libobjc4 libpipeline1 libqbscore1.10 libqbsqtprofilesetup1.10 libtinfo-dev libutempter0 libxft2 libxv1 libxxf86dga1 llvm-3.8 llvm-3.8-dev llvm-3.8-runtime qbs-common qml-module-qtquick-controls qt5-doc qtbase5-doc qtconnectivity5-doc qtcreator qtcreator-data qtcreator-doc qtdeclarative5-doc qtgraphicaleffects5-doc qtlocation5-doc qtmultimedia5-doc qtquickcontrols5-doc qtscript5-doc qtsensors5-doc qtserialport5-doc qtsvg5-doc qttools5-doc qttranslations5-l10n qtwebkit5-doc qtwebkit5-examples-doc qtwebsockets5-doc qtx11extras5-doc qtxmlpatterns5-dev-tools qtxmlpatterns5-doc x11-utils xbitmaps xterm 0 upgraded, 51 newly installed, 0 to remove and 24 not upgraded. Need to get 195 MB of archives. After this operation, 596 MB of additional disk space will be used. Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 libxft2 amd64 2.3.2-1 [36.1 kB] Get:2 http://repo.ubports.com xenial/main amd64 qml-module-qtquick-controls amd64 5.9.5-0ubports1 [713 kB] Get:3 http://archive.ubuntu.com/ubuntu xenial/main amd64 libxv1 amd64 2:1.0.10-1 [10.3 kB] Get:4 http://archive.ubuntu.com/ubuntu xenial/main amd64 libxxf86dga1 amd64 2:1.1.4-1 [13.7 kB] Get:5 http://archive.ubuntu.com/ubuntu xenial/main amd64 libpipeline1 amd64 1.4.1-2 [24.6 kB] Get:6 http://archive.ubuntu.com/ubuntu xenial/main amd64 binfmt-support amd64 2.1.6-1 [50.7 kB] Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libllvm3.8 amd64 1:3.8-2ubuntu4 [10.3 MB] Get:8 http://repo.ubports.com xenial/main amd64 qbs-common all 1.10.1+dfsg-1 [103 kB] Get:9 http://repo.ubports.com xenial/main amd64 libqbscore1.10 amd64 1.10.1+dfsg-1 [912 kB] Get:10 http://repo.ubports.com xenial/main amd64 libqbsqtprofilesetup1.10 amd64 1.10.1+dfsg-1 [104 kB] Get:11 http://repo.ubports.com xenial/main amd64 qtconnectivity5-doc all 5.9.5-0ubports1 [2516 kB] Get:12 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libobjc4 amd64 5.4.0-6ubuntu1~16.04.12 [111 kB] Get:13 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libobjc-5-dev amd64 5.4.0-6ubuntu1~16.04.12 [381 kB] Get:14 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 libclang1-3.8 amd64 1:3.8-2ubuntu4 [4139 kB] Get:15 http://repo.ubports.com xenial/main amd64 qtgraphicaleffects5-doc all 5.9.1+ubports [13.1 MB] Get:16 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 libclang-common-3.8-dev amd64 1:3.8-2ubuntu4 [1167 kB] Get:17 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 clang-3.8 amd64 1:3.8-2ubuntu4 [21.5 MB] Get:18 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 clang amd64 1:3.8-33ubuntu3.1 [3248 B] Get:19 http://archive.ubuntu.com/ubuntu xenial/universe amd64 libbotan-1.10-1 amd64 1.10.12-1 [957 kB] Get:20 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libllvm5.0 amd64 1:5.0-3~16.04.1 [13.5 MB] Get:21 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 libclang1-5.0 amd64 1:5.0-3~16.04.1 [6695 kB] Get:22 http://archive.ubuntu.com/ubuntu xenial/main amd64 libtinfo-dev amd64 6.0+20160213-1ubuntu1 [77.4 kB] Get:23 http://archive.ubuntu.com/ubuntu xenial/main amd64 libutempter0 amd64 1.1.6-3 [7898 B] Get:24 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 llvm-3.8-runtime amd64 1:3.8-2ubuntu4 [72.3 kB] Get:25 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 llvm-3.8 amd64 1:3.8-2ubuntu4 [1524 kB] Get:26 http://archive.ubuntu.com/ubuntu xenial/main amd64 libffi-dev amd64 3.2.1-4 [161 kB] Get:27 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 llvm-3.8-dev amd64 1:3.8-2ubuntu4 [16.7 MB] Get:28 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 qtbase5-doc all 5.5.1-3ubuntu0.1 [26.3 MB] Get:29 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 qtdeclarative5-doc all 5.5.1-3ubuntu0.1 [9705 kB] Get:30 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 qtscript5-doc all 5.5.1-3ubuntu0.1 [381 kB] Get:31 http://archive.ubuntu.com/ubuntu xenial/universe amd64 qtserialport5-doc all 5.5.1-2build1 [300 kB] Get:32 http://archive.ubuntu.com/ubuntu xenial/main amd64 qtsvg5-doc all 5.5.1-2build1 [190 kB] Get:33 http://archive.ubuntu.com/ubuntu xenial-updates/universe amd64 qttools5-doc all 5.5.1-3ubuntu0.1 [3567 kB] ^C -
@MarkG_108 to me it looks like it would be installing INSIDE a docker container and not into your actual system
-
@MarkG_108 yes it is safe to use as it install all in a container. Here it seems that clickable image needs to be updated .
-
@lduboeuf Great, I'll give it a try then.
-
Might be a nice addition:
https://github.com/rschiang/atom-language-qmlIt's available in the Atom install dialog.
-
Some other interesting things I found for live preview of QML/QTQuick apps:
https://github.com/penk/terrarium-app (even has a Ubuntu Touch version!)
-
@poVoq yes, that one also worked for me : https://open-store.io/app/me.lduboeuf.livecoding
-
@lduboeuf Cool, that seems even better, need to try on my device
Thanks for that. -
@MarkG_108 said in How should I set up my environment for developing?:
I tried, from way 0, to run the script
i've just updated the script, i made a mistake regarding volume mapping if you want to see any files under your home directory... ( don't need to rebuild the image though, only the sh script)
Now the set Atom/clickable really rocks!
