Call for testing: Samsung S3 Neo (s3ve3g) owners
-
Update: Automatic brightness works now. Next up will probably be Hotspot and MTP access
-
Cannot install AOSP 5.1 via TWRP 3.3.1.1.
Zip signature verification failed
or
Invalid zip file formatcurrently there is Lineage 7.1 installed.
Any thoughts?
Keep up the good work, Christian -
@zenfunk You do not need to factory-reset this device, you can proceed with the install instructions...
-
@zenfunk Oh sorry, I had accidentially copied over a paragraph from the Nexus 6P. I fuxed the install instructions already.
-
OK, I am in download mode, ran the scrpt (had to install some dependencies: qemu binfmt-support qemu-user-static e2fsprogs sudo simg2img), image was built, but it complains about no device found.
dmesg is:
[439613.189873] usb 2-1.2: USB disconnect, device number 31 [439622.117378] usb 2-1.2: new high-speed USB device number 32 using ehci-pci [439622.226225] usb 2-1.2: New USB device found, idVendor=04e8, idProduct=685d, bcdDevice= 1.00 [439622.226230] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [439622.226233] usb 2-1.2: Product: MSM8960 [439622.226235] usb 2-1.2: Manufacturer: Sasmsung -
@zenfunk Nono you need adb for installation
Download mode comes at the end to flash the kernel. Was this unclear from my text?
-
Mistake on my end, I ran the joined up commands on the bottom first and while not pushing the images to the device first, it then went into download mode with the second comand, so I assumed that it had to be in download mode.
I managed to complete the first command, but heimdall cannot download the PIT file and exits:Downloading device's PIT file... ERROR: Failed to send request to end PIT file transfer! ERROR: Failed to download PIT file! Ending session...Any hints?
-
@zenfunk said in Call for testing: Samsung S3 Neo (s3ve3g) owners:
lete the first command, but heimdall cannot download the PIT file and exits:
Hmm you used heimdall from my download ? Could be a version problem...
-
@Flohack Also try another cable and/or USB port on your PC. It could be sensitive a bit
-
Jup, version problem. It seems as if heimdall 1.4.1 from the Ubuntu repos is no good, I compiled 1.4.2 and it seems to work. I am rebooting into UB ports right now.
waiting....
-
Seems to be stuck at boot screen.....
BTW, thanks for putting your time and effort into this.
-
@zenfunk Hmm strange, can you connect it to the PC, and see if you get any RNDIS adapter in the hosts dmesg log?
-
Yes, this came up. Do you have any md5sums for the files?
-
BTW, AFAIK I never was asked for my passwords during install as was indicated by your instructions.
Enter your local host´s sudo password when prompted the first time The second time, enter the intended device lock password -
OK, I redownloaded the files, the checksums match. Reflashed with your heimdall (still no passwords though). Same result, the device hangs at the bootscreen, I even left it overnight. RNDIS comes up in dmesg. Any Ideas on how to get some logfiles off of that thing?
-
@zenfunk said in Call for testing: Samsung S3 Neo (s3ve3g) owners:
DIS comes up in dmesg. Any Ideas on how to get some logfiles off of that thing?
Sure, which IP does dmesg on the host tell you? Paste the relevant part of dmesg to a pastebin and link it here.
-
-
@zenfunk Ok that looks not so bad, use ssh phablet@10.15.19.82 to get inside
- I will tell you what to look for, but basically use dmesg and /system/bin/logcat to get an idea whats going on. The phone has booted but is not able to get into graphics mode, we will find out why. -
chris@funkbook:~/Downloads/s3neo/halium-install-continuous$ ssh phablet@10.15.19.82 ssh: connect to host 10.15.19.82 port 22: Network is unreachablenot good...
-
@zenfunk Then please hold VOl-Up, Press power until you get the blue text for recovery. Then, in recovery, use cat /proc/last_kmsg to see what goes wrong there...
