Oneplus 3/3T

poVoq · 5 Oct 2020, 13:33

Anyone has a suggestion how to fix the silent mode slider button? It was working on first boot of the system, but now it doesn't seem to register any longer.

3T_Ed · 5 Oct 2020, 13:42

@poVoq said in Oneplus 3/3T:

Anyone has a suggestion how to fix the silent mode slider button?

Do you mean the physical button (top left)?
When sliding that button the speaker icon in the top bar/toggle is striked through/muted on my 3T

edit: I'm on stable channel

poVoq · 5 Oct 2020, 14:00

@3T_Ed said in Oneplus 3/3T:

@poVoq said in Oneplus 3/3T:

Anyone has a suggestion how to fix the silent mode slider button?

Do you mean the physical button (top left)?
When sliding that button the speaker icon in the top bar/toggle is striked through/muted on my 3T

edit: I'm on stable channel

Ah a reboot seems to have fixed it. Odd.

poVoq · 6 Oct 2020, 09:39

Any idea what could be causing my OnePlus3 to be partially in Window mode, despite being set to staged?
See related discussion: https://forums.ubports.com/topic/4998/differences-in-qtwebengine-rendering/13

I noticed that the BottomEdge is displayed as if there was a mouse connected, and sometimes I shortly see a mouse-pointer on the circle screen appearing.

sven · 8 Oct 2020, 06:22

My OP3 runs an edge version from 2020-07-21. I would like to switch to another channel ("dev"), but only "edge" is offered under Updates|Update settings|Channels.

Lakotaubp · 8 Oct 2020, 06:35

@sven You should be able to move to dev iirc and you are upto date with updates. So recheck updates and channels. If not rerun through the installer don't select the wipe option and do it that way.

sven · 9 Oct 2020, 18:12

@Lakotaubp Thanks for your suggestions. I checked again: no other channels available (probably the installed one was an early one). Now I am trying the ubuntu installer 0.5.2-beta. My OP3 is running, developer mode is on, but the installer is only showing Waiting for device.

If I select the model by hand, installation ends with lost connection. I am using the official OP3, red USB cable.

Lakotaubp · 9 Oct 2020, 18:52

@sven Perhaps try dropping down an installer version or two. I must admit to not trying the new beta one yet.
Edit Or 0.5.3 from here https://forums.ubports.com/topic/5008/testing-request-ubports-installer-0-5-3-beta

Keneda · 9 Oct 2020, 20:08

@sven said in Oneplus 3/3T:

red USB cable

That means quite nothing.

USB 2.0 capable cable is required, and usb 2.0 port is needed (not 3.0 one!).

Then if you can access your data under androïd on your PC with usb 2.0 cable on usb 2.0 port, USB data is working well and that should work for installing ubports.

sven · 9 Oct 2020, 20:10

@Lakotaubp I tried 0.5.3 beta without any change. Probably the reason is simple: fastboot devices won't show the OP3. In syslog, the following appears when I plug in the USB cable:

Oct  9 22:07:53  kernel: [101154.624051] usb 1-3: new high-speed USB device number 16 using xhci_hcd
Oct  9 22:07:53  kernel: [101154.774090] usb 1-3: New USB device found, idVendor=05c6, idProduct=f003, bcdDevice= 3.18
Oct  9 22:07:53  kernel: [101154.774095] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Oct  9 22:07:53  kernel: [101154.774099] usb 1-3: Product: Android
Oct  9 22:07:53  kernel: [101154.774102] usb 1-3: Manufacturer: Android
Oct  9 22:07:53  kernel: [101154.774104] usb 1-3: SerialNumber: 0123456789ABCDEF
Oct  9 22:07:53  systemd-udevd[59957]: 1-3: Process '/usr/lib/snapd/snap-device-helper bind snap_ubports-installer_ubports-installer /devices/pci0000:00/0000:00:14.0/usb1/1-3 189:15' failed with exit code 1.

Should I move this to a new topic?

Lakotaubp · 9 Oct 2020, 20:25

@sven Just tried 0.4.18 with OP red cable selected device myself and all worked. Just updating snap now to try latest version of installer.

Lakotaubp · 9 Oct 2020, 20:29

@sven That'll stop things. Have you checked with fastboot devices via a terminal?

sven · 9 Oct 2020, 20:36

@Lakotaubp Yes, I see no output from the terminal command fastboot devices.

poVoq · 9 Oct 2020, 20:51

@sven did you enable usb debugging and allow it for the specific PC via the popup that should appear on your phone's screen? Without that it will not be shown on fastboot devices.
Ah, wait you are already on UT and want to switch versions via the installer? I think adb isn't supported on the OnePlus3 UT port so I doubt it will show up unless you have booted into fastboot already.

Lakotaubp · 10 Oct 2020, 04:34

@sven Not trying to be funny but had you rebooted to fastboot mode first. if you had try another cable just in case.

sven · 10 Oct 2020, 07:37

@Lakotaubp Booting to fastboot mode before starting ubports-installer did the trick. Thanks. Maybe a message in the start screen of ubports-installer would help ("If your device already runs some version of UT, please ...").

Lakotaubp · 10 Oct 2020, 08:16

@sven If you stuck with 0.5.3 installer there should be a new way of reporting errors (https://forums.ubports.com/topic/5008/testing-request-ubports-installer-0-5-3-beta) Or give it a try and see if it is the same on there then report it. That will probably be the quickest way.

sven · 10 Oct 2020, 08:44

@Lakotaubp I only worked with the new version (0.5.3 beta). I opened an issue for this: https://github.com/ubports/ubports-installer/issues/1441

Dnc7 · 15 Oct 2020, 14:35

Is it possible to make dual boot for this phone. I was thinking about multirom with UBports and LineageOS?

Lakotaubp · 15 Oct 2020, 16:07

@Dnc7 Sorry dual boot is not supported.