porting lenovo smart tab m10 plus x606
-
@marek_python @kugiigi @Luksus
Here the same.....starting lenovo rescue tool 40%, waiting 20 minutes nothing happened now it Ended With failure
-
@fp2andfp3-user
These tools should detect device within few seconds. It shouldn't take minutes.I'm just wondering what we've done with it that even this tool can't seem to help.
I'd like to suggest to flag (or delete) that ROM from list of downloads. At least 3 devices are dead because of it.
The last thing the UT community needs is more dead tablets. -
Do you both have the same issue? Just blank screen, not even the Lenovo boot up screen?
-
@kugiigi
I've got completely dead tablet. Won't power on.Things I've tried and done:
-
pressing and holding different combos of buttons to invoke
fastboot -
checked if tablet can be detected by SP Flash Tool
-
downloaded and installed Lenovo Rescue Tool and checked
adb and USB drivers. (tool won't detect tablet on pressed volume up and plug in) -
posted and researched on XDA site.
-
-
Oh wow....that sounds bad....
not even a charging screen or something? No fastboot or recovery?
I'm trying to get back all my conversations about my flashing journey. So far, it seems that the worst was my tablet is bootlooping in the Lenovo splashscreen and no charging screen. But I was able to reflash the latest stock ROM with the Lenovo rescue tool. After that I tried again and followed the steps I mentioned earlier and it went successful. Hopefully, you can still recover yours and flash UT. I think someone said that this tablet isn't easy to hard brick so good luck
-
I was told that you can try pressing volume up when plugging the device to your PC or volume down.
-
@kugiigi
Yep ... I've tried to torture the buttons in many different ways. -
@kugiigi said in porting lenovo smart tab m10 plus x606:
Do you both have the same issue? Just blank screen, not even the Lenovo boot up screen?
Yes
-
@marek_python so perhaps plug it in and let it alone for some hours, to let it charge a bit....
-
@luksus i will try that.....nothing has managed the Problem.......
Thanks -
@luksus
Yeah I'll leave it charging for few hours. Though when I started messing with it the battery was well over 50%. No harm in leaving it on a charger. -
@luksus said in porting lenovo smart tab m10 plus x606:
@marek_python so perhaps plug it in and let it alone for some hours, to let it charge a bit....
Over night nothing happened.....I have no idea anymore
-
I just can't believe, that there is no way ... -
I noticed the dead tablet is still sort of detected by Windows
but the tablet isn't listed in either
fastboot devicesnor inadb devices -
I really think the rescue tool will help you recover your tablets. Try read the steps on how to use it again and again. Maybe you missed something.
-
@fp2andfp3-user
I hate to say this but quite a few people fixed their non-responsive tablets by opening it up, disconnecting the battery for few seconds, connecting it back and then try to power it on.I don't like the idea of butchering a new tablet but if we don't do anything we got ourselves a pretty expensive paper weight.
-
@FP2andFP3-User & @marek_python
I just flashed the TB-X606F_S100015_191127_BMP Images with the SPFlashTool on my X606XA Tablet.- tablet was turned off
- no cable connected
- download started in flashtool
- connected usb cable without pressing any button
- flashing started
- "Downlod Ok"
- red light is on
- I disconnected the cable and hit the power button.
It boots... but with some errors. Could be caused by not matching tablet version. Anyway.
Now I wanted to flash TB-X606F_USR_S100168_200828_BMP:
- tablet was turned off (I turned it off by long power button press until the display turns off, if it not vibrates again, I can be sure that it is really turned off)
- no cable connected
- download started in flashtool
- connected usb cable without pressing any button -> red light on but else nothing happened
- unplugged cable
- connected usb cable with pressing volume down button -> red light on but else nothing happened
- unplugged cable
- connected usb cable without pressing any button -> red light on
- a short press on the power button
- after ~2 seconds flash-tool did start to download images
- "Downlod Ok"
- red light is on
- I disconnected the cable and hit the power button
Device boots this time without errors...
No Idea, if this is helpful.
-
@FP2andFP3-User has this ^ worked for you ? It hasn't for me.
The flash tool doesn't react when tablet is connected at all on my end. -
@marek_python i can do it in 2-3 hours. Sorry
-
When did you buy the tablet? Maybe they changed things by the newer one?
