MMS success and failure

Fizz

@rik
Oh, i thought this was supposed to work whether wifi was enabled or not. I did have it enabled, so i just tried it with wifi disabled, and the behavior is the same.

Normal cellular data seems to be working (i can browse the internet when wifi disabled, etc).

If i switch the pda.bell.ca and the inet.bell.ca, then cellular data seems to break- can't bring up web pages anymore. MMS messaging remains as before; (get the notification of an mms but can't retrieve it).

I'll try the logviewer and reply further...

Fizz

@rik
Ok here is what the log file says when a new mms is detected.

2022/01/18 08:58:02 Received ReceiveNotification() method call from 44600

2022/01/18 08:58:02 Push data


00000000 00 06 29 1f 22 61 70 70 6c 69 63 61 74 69 6f 6e |..)."application|


00000010 2f 76 6e 64 2e 77 61 70 2e 6d 6d 73 2d 6d 65 73 |/vnd.wap.mms-mes|


00000020 73 61 67 65 00 81 84 af 84 8d 01 00 8c 82 98 33 |sage...........3|


00000030 33 65 34 34 62 61 65 61 63 32 64 35 64 36 30 39 |3e44baeac2d5d609|


00000040 39 30 36 32 37 36 30 2d 31 00 8d 92 89 1a 80 18 |9062760-1.......|


00000050 ea 2b 31 35 31 39 38 35 39 30 35 34 37 2f 54 59 |.+15198590547/TY|


00000060 50 45 3d 50 4c 4d 4e 00 96 00 8a 80 88 05 81 03 |PE=PLMN.........|


00000070 09 3a 7f 86 81 83 68 74 74 70 3a 2f 2f 6d 6d 73 |.:....http://mms|


00000080 63 32 2e 67 65 74 2e 62 65 6c 6c 2e 63 61 2f 63 |c2.get.bell.ca/c|


00000090 6c 6f 75 64 6d 6d 73 63 3f 6c 3d 33 33 65 34 34 |loudmmsc?l=33e44|


000000a0 62 61 65 61 63 32 64 35 64 36 30 39 39 30 36 32 |baeac2d5d6099062|


000000b0 37 36 30 2d 31 00 8e 03 04 68 1b |760-1....h.|


2022/01/18 08:58:02 Trying to set Active property to true for context on true /ril_0/context2

2022/01/18 08:58:02 Cannot set Activate to true (try 1/3) interface on /ril_0/context2: org.ofono.Error.Failed: Operation failed


2022/01/18 08:58:05 Cannot set Activate to true (try 2/3) interface on /ril_0/context2: org.ofono.Error.Failed: Operation failed


2022/01/18 08:58:07 Cannot set Activate to true (try 3/3) interface on /ril_0/context2: org.ofono.Error.Failed: Operation failed


2022/01/18 08:58:09 Failed to activate for /ril_0/context2 : failed to activate context


2022/01/18 08:58:09 Cannot activate ofono context: no context available to activate

Fizz

@rik
And after i try to redownload the failed mms, the log says:


2022/01/18 09:39:06 Failed to activate for /ril_0/context2 : failed to activate context


2022/01/18 09:39:06 Cannot activate ofono context: no context available to activate


2022/01/18 09:39:07 Received unknown method call on org.ofono.mms.Message 


2022/01/18 09:39:06 Failed to activate for /ril_0/context2 : failed to activate context


2022/01/18 09:39:06 Cannot activate ofono context: no context available to activate


2022/01/18 09:39:07 Received unknown method call on org.ofono.mms.Message MarkRead


2022/01/18 09:39:07 Message /org/ofono/mms/302610917674682/ca0a25478cfe5c51a4aca5f2d8d121f0 is not responded and not expired, not deleting

StandUpMobile

TLDR: try pda2.bell.ca for one of the APN's (Internet).

Full version:

On Bell Canada. WITHOUT the patch that allows merged apn entries, this should work (Although I have a bug in nuntium that prevents me from receiving ... I CAN wget the files so hopefully some version of these will help out):

[context1]
Name=Internet
AccessPointName=pda2.bell.ca
Username=
Password=
AuthenticationMethod=none
Type=internet
Protocol=ip
Preferred=true
MessageProxy=
MessageCenter=

[context2]
Name=bell mms
AccessPointName=pda.bell.ca
Username=
Password=
AuthenticationMethod=none
Type=mms
Protocol=ip
Preferred=true
MessageProxy=web.wireless.bell.ca:80
MessageCenter=http://mms.bell.ca/mms/wapenc

To make this stick through APN resets I changed the bell section of my /usr/share/mobile-broadband-provider-info/serviceproviders.xml

        <provider>
                <name>Bell Mobility</name>
                <gsm>
                        <network-id mcc="302" mnc="610"/>
                        <network-id mcc="302" mnc="640"/>
                        <network-id mcc="302" mnc="651"/>
                        <network-id mcc="302" mnc="880"/>
                        <apn value="pda2.bell.ca">
                                <plan type="postpaid"/>
                                <usage type="internet"/>
                                <name>Internet</name>
                        </apn>
                        <apn value="pda.bell.ca">
                                <plan type="postpaid"/>
                                <usage type="internet"/>
                                <name>Mobile Web</name>
                        </apn>
                        <apn value="pda.bell.ca">
                                <usage type="mms"/>
                                <name>bell mms</name>
                                <username></username>
                                <password></password>
                                <mmsc>http://mms.bell.ca/mms/wapenc</mmsc>
                                <mmsproxy>web.wireless.bell.ca:80</mmsproxy>
                        </apn>
                        <apn value="pda2.bell.ca">
                                <plan type="postpaid"/>
                                <usage type="internet"/>
                                <name>Mobile Fast Web</name>
                        </apn>
                </gsm>

ronbillock

Hi, I am the original poster for this thread. My MMS still does not work. My APN is posted. Some posters seem to indicate this is a N. America or US issue as it works elsewhere. Some say to get the log but from the information posted that didn't seem to help the person posting it. I have 2 MMS messages within the last hour that I can not access. If I follow the steps and then push Download the phone says a new MMS message was received but the message is not there but I can again trigger the button with the same results. The phone will 'ping' and vibrate as if there is a message, which there is...oops. Between issues like this and soon losing service due to VoLTE I am not terribly excited about my efforts to leave the evil Apple empire. For now, I will continue to monitor the thread but I just wanted to say, at least for me, the issue was not resolved with whatever directions/updates provided.

lsitongia

@ronbillock I can't directly help you, but all I can add to this is that I had trouble, too, with my GSMA (ATT compatible) phone doing MMS. From the suggestion of someone else here, I switched from my Google Fi SIM to Red Pocket (GSMA) and have been able to use MMS here in the US (I'm in Colorado).

ronbillock

@lsitongia I am not sure what that means. Did you change sim cards/carriers or settings?

ronbillock

Update: I went out for a glass of wine. I decided to run a test. I turned on my wifi BUT I was not connected to wifi. I went to my two failed MMS messages. I pushed Download on one and it came through. I pushed Download on the other and the phone acted as if it received another message but the MMS did not come through. VERY odd. Also, the message that eventually came through was sent from an Android phone and the message that continued to fail was from iMessage/IOS. I have no idea how relevant any of this is but thought I would share for those that are more knowledgeable than me.

Fizz

@standupmobile
I have tried switching the Internet apn to pda2, as suggested. Unfortunately, it's still the same behavior. With pda2 for internet, i've tried with MMS set to pda as well as inet. But still no difference.

rik

@ronbillock said in MMS success and failure:

Update: I went out for a glass of wine. I decided to run a test. I turned on my wifi BUT I was not connected to wifi. I went to my two failed MMS messages. I pushed Download on one and it came through. I pushed Download on the other and the phone acted as if it received another message but the MMS did not come through. VERY odd. Also, the message that eventually came through was sent from an Android phone and the message that continued to fail was from iMessage/IOS. I have no idea how relevant any of this is but thought I would share for those that are more knowledgeable than me.

Ron, please use LogViewer to look at nuntium.log and then find the http address of the MMS message, then open terminal and try wget <http address> when your wifi is disconnected. If it downloads, you can view the first few lines of it with head <filename>. I still suspect your failed MMS download is because it is a group message: the first few lines should list the phone numbers that are part of the MMS group. If you could do this it would help not only you but us as well in understanding better where the MMS problem is.

rik

This post is deleted!

rik

@fizz is the output in nuntium.log still similar with messages about "failed to activate context" and "no context available to activate"? Can you please confirm your APN settings by doing this from a terminal (the APN settings are stored in the gprs file that I want to you to find and inspect):

sudo su #need to be root to view the gprs file

cp /var/lib/ofono/<some number... use "tab" to autocomplete>/gprs /home/phablet/gprs

chmod 666 /home/phablet/gprs

Then you can more easily open that file in your home directory for inspection and copy / paste using a gui text editor. It may give us more clues even though it seems we still don't have the corrrect MMS settings for Virgin Mobile.

Fizz

@rik
When i try the copy command, i get an error. It says cp: cannot create regular file '/root/gprs': Read-only file system . I did run sudo su, and the prompt does indicate i am root, so not sure what's happening there.

I don't know if it matters, but i see two folders under the ofono directory. One is 302610917674682 and the other is 302610917674682-3 (identical to the first but with an extra -3). If i try the cp on the other directory, the error is the file doesn't exist.

It looks like the nuntium log cleared itself overnight. So i'll generate some new tests and send you the log results as soon as i can.

rik

@fizz sorry I fixed the command above: since you are root it means ~ was /root with the read-only filesystem. I made it copy to /home/phablet instead. I think you can take the /var/lib/ofono/### folder without the -3

Fizz

@rik
The log file looks the same to me still. Here it is after a failed send image attempt:


2022/01/19 09:53:24 Received ReceiveNotification() method call from 44600


2022/01/19 09:53:24 Push data


00000000 00 06 29 1f 22 61 70 70 6c 69 63 61 74 69 6f 6e |..)."application|


00000010 2f 76 6e 64 2e 77 61 70 2e 6d 6d 73 2d 6d 65 73 |/vnd.wap.mms-mes|


00000020 73 61 67 65 00 81 84 af 84 8d 01 00 8c 82 98 39 |sage...........9|


00000030 33 39 62 34 32 61 61 62 38 30 39 61 37 31 63 31 |39b42aab809a71c1|


00000040 31 62 31 31 37 37 35 2d 31 00 8d 92 89 1a 80 18 |1b11775-1.......|


00000050 ea 2b 31 35 31 39 38 35 39 30 35 34 37 2f 54 59 |.+15198590547/TY|


00000060 50 45 3d 50 4c 4d 4e 00 96 00 8a 80 88 05 81 03 |PE=PLMN.........|


00000070 09 3a 7f 86 81 83 68 74 74 70 3a 2f 2f 6d 6d 73 |.:....http://mms|


00000080 63 32 2e 67 65 74 2e 62 65 6c 6c 2e 63 61 2f 63 |c2.get.bell.ca/c|


00000090 6c 6f 75 64 6d 6d 73 63 3f 6c 3d 39 33 39 62 34 |loudmmsc?l=939b4|


000000a0 32 61 61 62 38 30 39 61 37 31 63 31 31 62 31 31 |2aab809a71c11b11|


000000b0 37 37 35 2d 31 00 8e 03 04 68 1b |775-1....h.|


2022/01/19 09:53:24 Trying to set Active property to true for context on true /ril_0/context2


2022/01/19 09:53:25 Download issues: org.freedesktop.DBus.Error.InvalidArgs: Invalid URL: ''


2022/01/19 09:53:25 Trying to set Active property to false for context on false /ril_0/context2

2022/01/19 09:53:31 Received unknown method call on org.ofono.mms.Message MarkRead


2022/01/19 09:53:31 Message /org/ofono/mms/302610917674682/e33df6aaf65e8ddc050012a72b9dd4a9 is not responded and not expires, not deleting.

rik

@fizz said in MMS success and failure:

The log file looks the same to me still. Here it is after a failed send image attempt:

Can you try a receive MMS image? Other Canadian users reported they had trouble sending MMS but could receive. It doesn't solve your issue but helps identify where the problem may be?

The log info above doesn't indicate failed to activate context and no context available to activate like before but rather Invalid URL: '' like @StandUpMobile is seeing, I think.

Fizz

@rik
Ugh... some simple tasks are so complicated... After copying gprs to my home folder, if i tried to open it, the OS only offered going to the Open Store. I tried Document Viewer, but it won't open anything not in the Documents folder. So i moved gprs to Documents, but then i couldn't find a way to copy the text. And after trying to download a couple text editors, none of those seemed to have a way to search folders for me to open the file.

There must be an easier way, or i'm missing something.

So i'm manually typing out the results here. gprs contains the following:

[Settings]
Powered=1
RoamingAllowed=1

[context1]
Name=Bell internet
AccessPointName=pda2.bell.ca
Username=
Password=
AuthenticationMethod=chap
Type=internet
Protocal=ip
Preferred=true
MessageProxy=
MessageCenter=

[context2]
Name=Virgin mms
AccessPointName=pda.bell.ca
Username=
Password=
AuthenticationMethod=chap
Type=mms
Protocal=ip
Preferred=true
MessageProxy=web.wireless.bell.ca:80
MessageCenter=http://mms.bell.ca/mms/wapenc

rik

@fizz you can install "Seabass" from the Open Store to better view and edit text files.

Looking at your entries, the different things that stand out from mine are:

AuthenticationMethod=chap (mine is any)
I do not need any proxy settings for USA T-Mobile, so my MessageProxy is empty.... but it seems you do need it according to guides on the internet. I guess it wouldn't hurt to try without it?

For reference here is my gprs file when using separate APNs for Internet and MMS (the IMS one comes back each time if I manually remove it, but it also doesn't even show in the GUI so I think we can ignore it?):

[Settings]
Powered=1
RoamingAllowed=false

[context3]
Name=IMS
AccessPointName=ims
Username=
Password=
AuthenticationMethod=none
Type=ims
Protocol=dual
Preferred=false

[context4]
Name=Internet/WebConnect
AccessPointName=epc.tmobile.com
Username=
Password=
AuthenticationMethod=none
Type=internet
Protocol=ip
Preferred=true

[context6]
Name=US Mobile MMS
AccessPointName=pwg
Username=
Password=
AuthenticationMethod=any
Type=mms
Protocol=ip
Preferred=true
MessageProxy=
MessageCenter=http://pwg.mmsmvno.com/mms/wapenc

Fizz

@rik said in MMS success and failure:

Can you try a receive MMS image? Other Canadian users reported they had trouble sending MMS but could receive. It doesn't solve your issue but helps identify where the problem may be?

All the errors i have included are for when i try to receive. I can send images no problem, but i can't receive. The only thing i can receive are ordinary text messages.

Mine also fails for group messages. That is, if someone sends out a mass message on which i am included, i get the same error message.

Fizz

@rik
I've installed Seabass2 and it looks promising. Thanks for that.

I tried removing the MessageProxy entry, and that doesn't seem to make a difference.

In comparing to your settings: you have Roaming as false, while mine is true. Might this do something?

Is it possible for me to change the AuthenticaionMethod? It doesn't seem so via Settings, so i guess i'd have to manually edit the file. (Does Seabass2 have a sudo mode where i can see and modify the gprs file?)

I'm not sure what else i can try.