Wireless convergence on FP2 : black screen
-
Hello !
To try convergence on my FP2 I bought a HDMI wireless dongle with a button to switch between two modes: Miracast and DLNA.
I plugged it on a TV, connected my UbuntuTouch FP2 device to it remotely. The dongle appeared in the available external displays. Once selected, the screen on the TV became black (instead of the dongle's welcome screen) and the screen on my FP2 grey with a message "you can use this touchscreen as a pointer".
Waiting a couple minutes didn't change anything, the TV screen remained desperately black...What is funny it that I decided to take a screenshot (vol +& vol -) and once back in the "smartphone mode", I opened it: the image show the desktop of a big screen, with my UT apps displayed! So somehow UbuntuTouch was able to switch to "convergence mode" but not to correctly send the signal to the dongle...
How can I debug this?Best regards,
OlivierNote: I didn't connected any wireless mouse/keyboard, is it necessary?
Note2: I tested both Miracast and DLNA screencasting on LineageOS and it worked, so the dongle is not defect. -
@oli-sax
Hi Oliver,
I guess your dongle works on Android, but not on UBports/Ubuntu-Touch.
I have the Microsoft Dongle and it works already fine with Ubuntu, before UBports was released.
See here: "Known working Sink devices"
https://wiki.ubuntu.com/Touch/DisplayCasting
Before I tried this one http://amzn.to/2D0XlSa but it didn't work, and I send it back.
Then I bought this one: http://amzn.to/2D1anjH
and every thing works fine...
PS: This was already in August 2016 when I tried this with my BQ M10 FHD
See my German YouTube Video, where I show this: https://youtu.be/gWsr2gq9OUsAlex
-
Thank you for your answer, @WLBI !
I find quite funny that Ubuntu needs a Microsoft device for convergence
Anyway, as you also first tried with an incompatible device, it seems that the protocol is not as universal as I initially tough...
-
Is there a way to configure the external display?
I now have a MS display adapter and the connection with my FP2 is very stable. But the left part of the screen is cut off while in external display mode (and probably the top, too).
-
@Ingo with the xrandr command you are able to set the borders of the output. The command xrandr displays the output device. In my case it's "HDMI-A-0".
So i type in the terminal:
xrandr --output HDMI-A-0 --set underscan on
xrandr --output HDMI-A-0 --set "underscan hborder" 59 --set "underscan vborder" 32
Perhaps this will work in your case as well. -
Hi @marlboro50, today I found some time to test this out. But unfortunately it didn't help
First obstacle was that
xrandrwasn't installed. Not a big issue.
One I had it, I couldn't get it to work. First, theDISPLAYvariable wasn't set. I tried to set it to:0but then I got a "cannot connect to display" error.Is this supposed to work on UT? I thought it uses mir, not X11.
Or was the some more setup necessary to get it to work?Edit: I solved that particular issue by installing the Microsoft Wireless Display Adapter app from the MS store on my Win 10 laptop and from there changing the overscan. After that it also is ok when connecting from UT.
Now the only problem is that it's not really sharp. Like the resolution is somewhat off or so.
-
@Ingo OK. That's good news.
-
@Ingo said in Wireless convergence on FP2 : black screen:
Now the only problem is that it's not really sharp. Like the resolution is somewhat off or so.
I think the output resolution is limited to 720p, which may be much lower than whatever your displaying it on.
And indeed,
xrandrwill not work on UT, as we use Mir, not Xorg.
