Can't boot with my lenovo tab m10 fhd plus x606f
-
@MrT10001 Ok, thanks ! I'll give it a try and let you know
-
@MrT10001 It works ! Thank you very much ! But I've got a little problem : the InfoGraphic on the lock screen displays nothing, even when I click on it. Is it normal?
-
@Altairo13 Can you explain? Is this with Android or UT? What do you mean by infographic? Glad you have it working.
-
@MrT10001 It's with UT. The round on the lock screen displays nothing even when I click on it.
-
@Altairo13 tap three times quickly
-
@messayisto I tried but it didn't work
-
I also have another problem: when I close the cover of my tablet, it turns on instead of off.
-
@Altairo13 Sadly that's a known issue since the start of the port. Is the latest version in focal (Ubuntu 20.04) now?
-
@kugiigi I don't know where I can find my version of UT, but I think that I'm not in the last version
-
@Altairo13 Try tapping on 'System Settings' (little cog wheel on side bar). Then scroll down to the bottom and click on 'About'. You should see your version of UT under 'Software'.
Or slide sown from the top bar and select 'System' on the extreme right, then click on 'About This Device...' which should take you to the same page.
-
@Ian In the 'about' section, I only find the serial number, the Wi-Fi and Bluetooth address and the storage.
-
@Altairo13 hmm, odd. On my VollaPhone X I see what you mention and then I get a section on Software.
-
You don't get the UT version were you have manually installed a development version from Gitlab on some devices. You will also not get the update option either. Look at the version you have on GitLab, you may find more info in the readme or in the file name you have downloaded.
-
@MrT10001 I actually found my version on Gitlab, it's the Halium 9
-
@Altairo13 It is usually something like r21 (r being release).
-
@MrT10001 I searched but couldn't find it
-
@MrT10001
Hello. I got a device named TB-X606X and I flashed the Android 9 image. It boots into the system but the touch was strange. I unlocked the bootloader and checked the boot again. And then I flashed the boot and system and format the userdata into ext4. And then when I reboot, it didnt display anything and boootlooped. I think I need your help. Though I can make it back to use, I still want to use the Ubuntu port. Thanks. -
@DJGun TB-X606X isn't supported as such (see above). I would not try on this device unless you can port UT yourself. I would recover Android back onto the device using the Lenovo Recovery tool and look at getting a TB-X306F 4Gb 64Gb version. That is a good port for a tablet. I have highlighted that version as it is the version that works.
-
@MrT10001 I flashed this https://gitlab.com/ubports/porting/community-ports/android9/lenovo-tab-m10-fhd-plus/lenovo-x606 which said it supports TB-X606X (X606F/X606FA/X606X/X606XA), though it is not an official port.
-
@MrT10001 Hey, when I try to go to the Thread i get a message saying my access has been denied. I cannot for the life of me find an Android 9 ROM for this Tablet, could you please help me?
