VoLTE Implementation For Google Pixel 3a/3a XL

atarilinux

I got a runner and tried to run it, but the build failed. I may need some assistance with Gitlab as I haven't used it before. I'm more used to building on a local machine. It will take me a while to read up on it, and I don't want to slow anyone down.

Here are the changes I made to deviceinfo if someone wants to fork and try it on their own:

deviceinfo_kernel_cmdline="console=ttyMSM0,115200n8 androidboot.console=ttyMSM0 printk.devkmsg=on msm_rtb.filter=0x237 ehci-hcd.park=3 service_locator.enable=1 firmware_class.path=/vendor/firmware cgroup.memory=nokmem lpm_levels.sleep_disabled=1 loop.max_part=7 androidboot.boot_devices=soc/7c4000.sdhci androidboot.super_partition=system buildvariant=user"

deviceinfo_bootimg_header_version="2"
deviceinfo_bootimg_os_version="12.0.0"
deviceinfo_bootimg_os_patch_level="2022-05"

This was taken from sargo-sp2a.220505.008-factory-071e368a which is the September 2022 build -
12.1.0 (SP2A.220505.008, Sep 2022).

mr_growl

@atarilinux I haven't done much with gitlab but have experience with github runners. I'll try to get something going this weekend. I gather the error in your last build is due to not running as the root user. Maybe try putting a "sudo" in front of the apt commands in .gitlab-ci.yml ?

Eric H

@atarilinux
unsure but maybe systempart=/dev/mapper/system is missing in cmdline

from porting Telgram Group :

system.img and rootfs.img are the same thing from a fastboot POV. your userdata should be freshly formatted as ext4, but yes that's what the bottom of the doc also explains, which one you need and how to flash it depends on if you included e.g. systempart=/dev/mapper/system on cmdline for devices with super partition

also unsure about other fields

Eric H

@atarilinux
it seem this this file should be updated too :
https://gitlab.com/atarilinux/ubports-ubuntu-touch-google-sargo-volte/-/blob/main/.gitlab-ci.yml

atarilinux

@mr_growl

That's what I'm thinking too. When I looked at it again today, it looked like permission was denied because it wasn't running as sudo. I was using the runner on my local machine. I noticed it didn't prompt me for my password which was interesting. So, yes, we probably need to add sudo to the file.

atarilinux

@Eric-H

Thanks for the info! Just to verify, should work for a retro-fitted partition too, right? I'll check this out in the file and see if I can find anything else that may need to be added.

atarilinux

@Eric-H

Thanks! I was looking at that one when I was messing with the runner. Good to know we are on the right track with thinking something was going on with that part!

Eric H

@atarilinux
https://lucaweiss.eu/post/2023-03-30-retrofit-dynamic-partition/

atarilinux

@Eric-H

Thanks! This is a great post! Very helpful!

atarilinux

I added Sudo to the Apt statements in .gitlab-ci.yml. I also added systempart=/dev/mapper/system to the deviceinfo file.

For this part,
https://lucaweiss.eu/post/2023-03-30-retrofit-dynamic-partition/

I'm trying to figure out where to add this on github. The code on github is referencing a number of other githubs by "clone." I'm trying to untangle it to get a since of what happens when and where. I want to make sure I'm not missing anything.