Update to 24.0.1 and now won't boot.

johndoe

This post is deleted!

naz.R

Same on OP N10 on each rebooting.
Vol up + vol down + power for a few seconds and then try to switch it on again. Usually it helps, sometimes it takes two or three tries.

CyBerT

Played a little bit with it and now I cannot select "recovery" in fastboot. It just boots the system. Any Thoughts on that?

op6t_ut_user

I discovered that the Ubuntu 24.01 update unfortunately does not install correctly due to storage problems (on some partitions of the OP 6T) and therefore important data is missing, which is why it does not start.

Pingu

@op6t_ut_user did you wait up to 20 minutes while rebooting? like it was told on blog post to 24.04 update?

my op n10 5 g took about 7 minutes.

op6t_ut_user

@Pingu said in Update to 24.0.1 and now won't boot.:

@op6t_ut_user did you wait up to 20 minutes while rebooting? like it was told on blog post to 24.04 update?

my op n10 5 g took about 7 minutes.

Yes, I too have already made several attempts to install it, but unfortunately I've never been able to get it to work.

James T

On attempting to downgrade (installer V0.11.2, binary install from AUR) , booted to fastboot mode then:

info: Welcome to the UBports Installer version 0.11.2!
info: device detected: sdm845
warn: The device sdm845 is not supported!
info: device selected: enchilada
info: Installing Ubuntu Touch on your OnePlus 6/6T (enchilada)
info: configuring...
info: settings: {"bootstrap":true,"channel":"20.04/arm64/android9plus/stable"}
error: Error: fastboot:flash: Error: Flashing failed: {"error":{"code":1},"stderr":"fastboot: error: Failed to find AVB_MAGIC at offset: 0"}
stack trace: Error: Flashing failed: {"error":{"code":1},"stderr":"fastboot: error: Failed to find AVB_MAGIC at offset: 0"}
    at /usr/lib/ubports-installer/app.asar.unpacked/node_modules/promise-android-tools/lib/module.cjs:1121:15
    at /usr/lib/ubports-installer/app.asar.unpacked/node_modules/promise-android-tools/node_modules/cancelable-promise/dist/CancelablePromise.js:27:18
    at process.processTicksAndRejections (node:internal/process/task_queues:95:5)

Any pointers please.

MrT10001

@James-T It worked for me, but I used Win11 executable. Try changing the USB port, then the USB cable if that fails.

For others, the OP6 and 6T is being worked on so Noble will work.

James T

@MrT10001 Thanks for that reminder I have had issues with Ubports install from certain ports in the past, I'll try a different one.

Just hope that charging works without a working OS since it's now saying the battery is too low

James T

Managed to do it -- there's an option below "Erase user data", to enable/disable flashing the system (sorry, I wasn't careful enough to note exactly what it said) disabling that allowed the install to proceed and the system to reboot. It all looks the same as it was before the ill-advised foray int0 24.0.1.

yuu ä3

@MrT10001 how did you flash 24.04 exactly?

for me there is no boot..
install with system -> boot hangs on the bootloader warning screen.

install 24.04-1x stable or daily with ubinstaller 0.11.2 on ubuntu -> boot hangs on the bootloader warning screen.

downgrade with installer to 20.04 works !

Btw-James what did you managed?