Porting Ubuntu Touch (@UBPorts) to tenshi (BQ Aquaris U Plus)



  • Since early 2018, I've been working on porting Ubuntu Touch on tenshi, a mid range BQ Aquaris U Plus, commercialized with Android 6, thus suitable to work with Halium-7.1.
    See the HAL port specific details: https://github.com/Halium/projectmanagement/issues/54.

    The device is equipped with:

    • 5" HD 1280x720 screen, 294 HDPI
    • 3GB RAM,
    • 32 Gb ROM (in my case),
    • Qualcom(c) Snapdragon(c) 430 (msm8937) up to 1,4GHz

    as in his specs page (https://store.bq.com/en/aquaris-u-plus-2-gb).

    Nowadays the device has reached an interesting level of support, as the following features works well:

    • Kernel 3.18.31 for armv7l
    • Graphical User Interface, with unity8 (8.17+ubports5+0) and mir (0.24.20ubuntu11) for 32 bits libraries,
    • Data connection: up to 4G (depending on your Mobile Network Operator, but here in Spain tested either with Movistar, Orange and Vodafone),
    • wifi (embedded in the kernel)
    • Audio (and external output with jack): thanks to pulseaudio and recent pulseaudio-modules-droid-24 development,
    • GPS: it works
    • Screen rotation, using Ubuntu Touch Platform API, too. Rotation block also works,
    • SMS: inbound and outbound fully working, and notifications appear in the menu,
    • Ofono: audio in inbound and outbound calls work works out-of-the-box, now (2020-09-16) also hands-free speaker. It is able to mix well bluetooth headset output from speakers, but with handset it still works with both speakers and handset at the same time
    • test_sensors produces a congruent output,
    • Power, Volume up and down buttons
    • Printscreen by pressing at the same time Volume+ and Volume- during 2-3 seconds
    • Bluetooth: works
    • Dual SIM enabled
    • Notification partially works (for teleports, for instance, SMS, missed calls, SD storage)
    • Android alarms work
    • Hotspot works (tethering with linked devices)
    • Main and selfie cameras both work with @peat_psuwit's gst-droid and nemo-qtmultimedia-plugins. I kept on working with version in rootfs from reply #35
    • LED (white) when charging
    • Anbox (update 2020-03-03)
    • Apparmor (update 2020-03-26)

    Note: NOT NEEDED ANYMORE just before a call, manually run

    phablet@ubuntu-phablet:~$  pactl set-card-profile droid_card.primary voicecall && pactl set-sink-port sink.primary_output output-parking && pactl set-sink-port sink.primary_output output-speaker && pactl set-sink-volume sink.primary_output 200
    

    from terminal as phablet to activate audio in calls

    Lxc container works fine.

    Still to improve:

    • Fingerprint

    Tested and working (2020-09-16):

    At this moment it has been successfully tested with:

    For those who want to test it, please, use JBBgameich's halium-install (latest version), to install it on your device, once you completed TWPR installation on recovery.

    Join us on Telegram's chat.



  • thank you for your great work, is a good phone to port to UT, has many improvements over other phones already ported, thank you very much Guf...

    Regards...



  • You can find the proper resources:
    * halium-boot
    * system.img (updated on 2019-07-29)

    I personalized JBBgameich's halium-install script to be functional for tenshi:
    * halium-install

    Feel free to provide any comment and to contribute, test, ...

    Please, use link from original message: I am keeping them up to date



  • A small guide for dummies (like me) to install from those resources. Start at creating a directory where to store images and all the tool (halium-install, for instance) necessary to install UT on your tenshi:

    mkdir /home/guf/UT-tenshi
    cd /home/guf/UT-tenshi
    

    Get JBBgameich's halium-install script (latest version! it is now DEPRECATED my customized one). It will create a directory called halium-install.

    Fetching the official rootfs

    wget -c https://ci.ubports.com/job/xenial-rootfs-armhf/lastSuccessfulBuild/artifact/out/ubports-touch.rootfs-xenial-armhf.tar.gz
    

    Please, fetch halium-boot and system.img from my repository to $PROJECT_ROOT, too

    Then, let's start:
    Download TWPR from the following page: https://eu.dl.twrp.me/tenshi/twrp-3.3.1-0-tenshi.img.html
    Set developer mode and Unlock device: accordingly with https://wiki.lineageos.org/devices/tenshi/install#
    Connect your PC with tenshi using USB cable.
    From Android running (once a developer and enabled USB debugging:

    To reboot device to bootloader from PC terminal, run:

    adb reboot bootloader
    

    On bootloader, from terminal:

    sudo fastboot devices
    

    If it returns the serial number of your tenshi, then:

    sudo fastboot oem unlock
    

    Flashing TWPR into recovery

    sudo fastboot flash recovery twrp-3.3.1-0-$DEVICE.img
    

    Flashing halium-boot into the boot partition:

    sudo fastboot flash boot halium-boot.img
    
    sudo fastboot reboot
    

    Stop boot process to recovery by pushing Volume up and down at the black screen menu
    From within JBBgameich's halium-install directory:

    ./halium-install -v -p ut ../ubports-touch.rootfs-xenial-armhf.tar.gz ../system.img
    

    Manually insert password (for phablet) when asked

    If the process successfully end, you then can reboot to system from TWPR and enjoy UT on your device.

    Feel free to contact me in case of doubts.



  • @Guf thanks a million for your work!

    Just to be clear, when you say:

    Please, fetch halium-boot and system.img from my repository

    Can you paste the exact links for those packages? Thanks again !!

    Edit: I assume those links are these https://forums.ubports.com/post/21498 what I mean is that'd be nice if you include that info inside your how-to 🙂



  • Hello and thanks for the good work.
    I was able to install everything without any errors as described above. Unfortunately the phone gets stuck in the boot window after flashing with halium-install.



  • @Invy

    i dont own the phone in quesion myself but i think this is normal with halium.
    you have to give ubuntu touch the correct premissions.

    you have to ssh or telnet into the phone and run these commands:

    sudo mount -o remount,rw /
    sudo -i # And enter your password
    cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//' >/usr/lib/lxc-android-config/70-[codename].rules
    

    and change the [codename] to your devices codename, then do a reboot.

    As described in the docs:
    https://docs.ubports.com/en/latest/porting/running-ut.html



  • @Guf I tried to follow those steps but what are you doing with that if statement there:

    • The if statement does not work, you need blanks at the closing ] brace, otherwise bash breaks
    • Why you need to use an if statement there, just tell people where to move the tar file
    • Nandell told me the tar file is not available? Is it mandatory, how to get it?

    If you want people to be able to follow that, it needs to be much clearer how to start. Also, why so many env variables? Thats confusing, just tell people which files to download from where into the same folder and then they should cd into that folder and run all commands form there.



  • @Flohack I updated the small guide since it used my old customized version of JBBgameich's halium-install. In the beginning, it was hard to fix ssh issues without personalized it, but now it works flawlessly.



  • @Guf Ok I will take a look. meanwhile, I see the post from @ComLarsic - did you not add the udev rules into the system.img? I can tell you how to do this really nicely. Also other configs, so people really only need to run halium-install and are done.



  • @Flohack can you post here (ideally in the porting documentation) how to add udev rules and other configs in the system.img? I also need that for Redmi 4x (santoni).



  • @keep37

    i dont own the phone in quesion myself but i think this is normal with halium.
    you have to give ubuntu touch the correct premissions.

    you have to ssh or telnet into the phone and run these commands:

    sudo mount -o remount,rw /
    sudo -i # And enter your password
    cat /var/lib/lxc/android/rootfs/ueventd*.rc|grep ^/dev|sed -e 's/^\/dev\///'|awk '{printf "ACTION==\"add\", KERNEL==\"%s\", OWNER=\"%s\", GROUP=\"%s\", MODE=\"%s\"\n",$1,$3,$4,$2}' | sed -e 's/\r//' >/usr/lib/lxc-android-config/70-[codename].rules
    

    and change the [codename] to your devices codename, then do a reboot.

    As described in the docs:
    https://docs.ubports.com/en/latest/porting/running-ut.html

    I posted how to do it here ^^^



  • @ComLarsic I'm sorry I wasn't clear enough
    I was asking a way to add the results of these commands in the system.img.
    I thought it would be possible (and I think it is possible) to generate udev rules on the first installation and then copy the file somewhere in the build directory and integrate it into the build system so that it ends up in the system.img file.
    So no need to execute these commands after every flash.

    I assume that the rules for other devices found in /usr/lib/lxc-android-config/ come from the xenial rootfs.



  • @keep37 maybe you could mount the system.img and run the command inside of the mountpoint?



  • @ComLarsic No this is not the right way to do this. It works like this:

    • Create a folder ubuntu in your device repo
    • Copy all relevant config files for your port there, in my case:
      ofono.override: Customizations for the ofono/RIL part
      70-hammerhead.rules: udev rules
      display.conf: Screen resolution settings
      config-default.xml: repowerd config
    • Open device.mk or similar file for your port
    • Add a section like this:
    # Ubuntu Touch
    PRODUCT_COPY_FILES += \
        $(LOCAL_PATH)/ubuntu/ofono.override:system/halium/etc/init/ofono.override \
        $(LOCAL_PATH)/ubuntu/70-hammerhead.rules:system/halium/lib/udev/rules.d/70-android.rules \
        $(LOCAL_PATH)/ubuntu/display.conf:system/halium/etc/ubuntu-touch-session.d/android.conf \
        $(LOCAL_PATH)/ubuntu/config-default.xml:system/halium/usr/share/repowerd/device-configs/config-default.xml
    

    You can also copy files into the system image if needed, firmware, startup scripts for Android init.rc - its very flexible.

    Note: Keep the names for those 4 files on the right side! They are overwriting existing files in the rootfs and its absolutely necessary to keep them like this, otherwise it wont work.

    You can add various files with this method. They will be dynamically mounted into the rootfs at boot time. Never touch the rootfs! It needs to stay clean for updates.



  • @ComLarsic you posted a developers command from the docs, but that´s not how it can be persisted correctly. Unfortunately our guide lacks a lot of informations.



  • @Flohack ah alright, sorry if i lead to any confusion. thanks for the help 🙂



  • Thanks for your help!
    In the meantime I was able to install UBports successfully with the new files.
    UBports runs really well on the Aquaris U Plus.
    After the standby, I always get the window with the selection to shutdown or restart, seems to be a bug.
    The media playback also works very bad.
    But otherwise I like this port very well.



  • @Invy Still to fix audio and videoplayback, LEDs and compatibility with anbox, I know it. I hope to fix them ASAP.
    Regarding waking it up after standby, it might seems something recently introduced by some new package version, with new graphical version. Need to investigate about it, even though I doubt it is a bug.
    I keep on using tenshi as daily driver and it works fine



  • With an anbox compatibility and without the bugs you mentioned, I would also use the phone as a daily driver. I'm available for testing or other support if I can help you with the development.


Log in to reply