Oneplus 3/3T

A Former User

@vince1171 Thank you kindly for that. The modified command seemed to complete its task. Ran the installer again and it got a bit further this time, but errored out just after the 'sending files' stage.

There was the 'Yikes' pop up window with details but I didn't know how to save the info, sorry. Screenshot of Terminal might help?

Edit: I tried to carry on for 2nd time but it got stuck on 'sending files'

file:///home/chris/Pictures/ubp-installer,6Nov,16-26pm.png

banderson5586

For those getting

"fastboot: error: Couldn't parse partition size '0x'."

I fixed this by dropping into TWRP recovery and fixing /data. I had messed up /system as well and needed to fix that too

From TWRP I set /data to ext4 and then ran the installer. The files were able to send successfully and the installation completed.

The other nice thing about using TWRP was that it has a terminal built in so I was able use df to confirm that the partition was correct.

dieharddan

Tried all the suggestions and am also getting stuck at "sending". By flashing twrp and switching data to ext4 as suggested above, I was able to format: ext4 cache and userdata without errors. but the first run of the installer I get the Yikes! page, immediately running the installer again i get stuck at sending while the phone shows fastboot mode. I waited 15/20 minutes.

dieharddan

I was able to get it to install now, not sure I could reproduce.

A Former User

Happy to report successful installation to edge channel on OP3T via ubp installer 0.4.6-beta! I look forward to trying this phone alongside my daily driver BQ E4.5.

Just for the record, I was not intending to run the installer again but I was playing with the phone (not connected to laptop) and trying to get to the Android Recovery screen because of being unable to get the phone to boot into anything at all

In all previous attempts at pressing vol up & power a different screen would come up: offering Fastboot and other options. On selecting say, Recovery, another screen would come up saying 'untrusted device; oem unlocked' and would prompt a button press which would open yet another window offering similar options, ie restart,recovery, pwr off etc. Difficult to remember precise steps but quite often nothing would happen apart from going back and forwards between these two screens. Turning off the device seemed to be all that would work. Previously the Android Recovery screen only presented when connected to and running the installer.

However, by constantly selecting recovery on both of these screens by about the fourth or fifth cycle the Android recovery screen presented itself. EDIT: Selected 'Android Actions' and 'Factory Reset'. Ultimately failed with an error...something to do with fstab. This looked promising enough for me to get out of bed and hook the phone up to the installer...where I noticed a new version. First run almost worked. Second run did the trick.

Happy Days. I knew it would work out eventually, but this quickly was a surprise indeed! Well done you masters of magic at ubports!! Onward and upwards!!

pglushkov

Hi all!

Following advice from @banderson5586:

flashed TWRP to recovery partition using fastboot
'fastboot flash recovery <twrp.img>
where twrp.img was downloaded from https://twrp.me/oneplus/oneplusthree.html
rebooted phone if 'recovery' mode and then using UI of TWRP I did the following

fixed 'cache' partition
fixed 'data' partition
formatted and fixed 'system' partition

after that installation with ubports-installer v.0.4.6 could be finished successfully.

Now all seem to work finally!

Important step was to format and fix the 'system' partition, before I did that, only fixing 'cache' and 'data' partition did not help - installation always stalled somewhere in the middle of 'sending' phase, when Ubuntu OS is supposed to be flashed on the device. After doing manipulations with 'system' partition, finally all finished successfully.

Thank you everybody for your comments and shared experience! And special thanks to UBPorts developers who make it all possible in the first place!

bsdfreak

It seem to run fine, runs better than my nexus 5 because media files actually work.
How did you get anbox running?
Is there any way to get the open-store installed?

joe

@bsdfreak Can you download it from here and install from command line?
https://open-store.io/app/openstore.openstore-team

click install openstore.openstore-team_2.81_armhf.click

or whatever version you download

bsdfreak

@joe doesn't work when it fails because i use arm64.

joe

@bsdfreak Right. That's unfortunate. I guess it can be repackaged for arm64 at some point:
[EDIT] https://gitlab.com/theopenstore/openstore-app/merge_requests/41

bsdfreak

@joe than i wait for the merge to happen. at least the basic apps seem to work fine. typing this on my oneplus 3. I imagine the openstore will come with a ut update?

bsdfreak

Some testing:

the keyboard doesn't work when adding an account.
notes app doesn't work and gives a blank screen

andybleaden

@bsdfreak Yes I had that when I installed it. I also had the double triple reboot until it kicked into shape and booted and boy was it fast. You can see here from a twitter video when I did it later last week it was very fast and really responsive.
twitter video

Working!
Regarding 64 bit apps I heard from @CiberSheep via twitter
"plain qml apps will work. Other apps need recompilation for target architecture. OpenStore is in the work for serving multiarch clicks." all of which is good new.

I also tried to install open store but got error messages ...in fact lots of errors installing anything....but that will come. The main thing is that it works. Wifi etc ..mobile/ data needed a reboot again but over all. Job well done

bsdfreak

@andybleaden you need to give in the allow-unauthorized to install with commandline

andybleaden

@bsdfreak oh cool thanks...did/does that make the OpenStore installation work? I remember this from previous earlier openstore installations before UBports really kicked in

pglushkov

@bsdfreak Hi! Could you please explain more specifically, what you mean by "give in the allow-unauthorized" ?
Thanks!

andybleaden

@pglushkov On the old version I used from @OMGUbuntu here

I had to allow it in the terminal

pkcon install-local --allow-untrusted openstore.openstore-team_0.103_armhf.click

Not convinced that will still work or is the correct version.

pglushkov

@andybleaden said in Oneplus 3/3T:

@pglushkov On the old version I used from @OMGUbuntu here

I had to allow it in the terminal

pkcon install-local --allow-untrusted openstore.openstore-team_0.103_armhf.click

Not convinced that will still work or is the correct version.

Yes, thank you! I've tried that with the 'allow-untrusted' option and it did not work, ARM64 is still ARM64. But @bsdfreak mentioned some 'allow-unauthorized', so I was wondering if mb that is something different.

andybleaden

@pglushkov hmmmm yes fear that is correct over to you @bsdfreak

bsdfreak

@andybleaden i mentioned it out of the top of my head and it is untrusted not unauthorized. Just checked it.