Oneplus 3/3T
-
@Lakotaubp I have the switch for the flashlight under battery icon but neither using that switch nor the Open Store application work (i.e. flash light does not switch on).
I expected the flash was not working for some driver issue. Using the procedure you mentioned solves it? If so, has to be done again after OTA update (daily)?
Thanks in advance!
-
@ma I noticed the same behaviour. I even found that it doesn't really power off. When you try to power off, the screen goes dark but it is still on and drains the battery. That is the reason why you need to press power button very long to make it boot again - it is still running. I have no clue why it does not correctly shutdown any more.
-
@Marcos No it stays working. Needs to be re done if the installer is used.
-
@Lakotaubp Thanks for the info! I did the installation and, even at indicator-power installation told me I' m on the last version so no update, after rebooting the flash light worked if switching on from the battery switch. Does not work neither from the camera (flash) nor from the torch appplication.
Thanks for the trick! That' s another improvement! Just video recording and playback missing to me to be perfect -
Es wäre schön wenn es hier eine German Abteilung geben würde.
-
@carrabelloy Please can you use English on this forum. Thank you
-
-
@carrabelloy there is a german telegram group:
UBports DEUTSCH https://t.me/UBports_Deutsch -
Could you please try this halium image :
- Trick for the incoming calls (doesn't seems 100% but around 95% of call going though)
- Trick to reconnect wifi to the network after aeroplane mode on/off/on
- right button calling the dash.
https://drive.google.com/drive/u/0/folders/17eIsuxxcbbALniQMIHdZQTthqet7cywK
-
@FBrain
To install other version of bluetooth :
https://github.com/ubports/bluez-packaging/pull/6#issuecomment-592493552the 5.53 works fine https://ci.ubports.com/job/ubports/job/bluez-packaging/job/xenial_-_even-newer-bluez/
click on + view. -
Can someone help me set up anbox ? I have flashed this image, but it gave me an error saying that the operation failed as it is not a boot image (Sending to "boot" partition). When i type in "anbox-tool install, i get an error saying that oneplus3(t) is not supported yet. What am i doing wrong?
-
@pratham if you use the prebuild halium images over here https://github.com/Vince1171/OnePlus3-T-Halium-Prebuild you can use anbox, i guess the binder got removed in the installer version.
be aware tho that some features may not be available without extra work (camera, flashlight, etc.)
-
@ComLarsic I don't think I will be able to do that since my TWRP has been replaced with the ubports recovery and also I cannot access adb (Device doesn't show up even with developer mode enabled) or ssh (connection keeps getting refused). I can only use fastboot
-
@pratham you can flash TWRP using fastboot by using "sudo fastboot flash boot [twrp image]"
-
@ComLarsic Yes, but Ive heard that OTA updates wont work then for ubports, is that true?
-
@pratham yes, flashing a different recovery will prevent ubuntu touch from installing updates. so its probably better just to wait for official anbox support
-
@ComLarsic And theres no way to switch back to the ubports recovery ?
-
@pratham if you already removed the recovery then you can install it again by using the installer, you can even tell it to leave userdata alone so you can keep all your files.
-
@ComLarsic Wont the installer remove Anbox again though. Or am I missing the point
-
@Lakotaubp yes, but his error was that he couldnt install anbox. now his problem is that he flashed twrp on his device preventing him from updating