NordVPN on Ubuntu Touch
-
@Seba I gave a try to connect but the result was the same.
VPN connection seems to be activated like a picture I uploaded before
but my nexus5 can't go anywhere.Web Browser shows
'Error: net::ERR_NAME_RESOLUTION_FAILED’
This is exactly the same result as I got before.Thank you Seba.
You must be right.
I'm sure something else is wrong with my Nexus5.
I have no idea why my Nexus5 get to be disable to resolve name when
VPN is on. When VPN is off it can access to NordVPN page without
any problem. -
It doesn't work for me, no matter the cert I use if you make it work just let me know @Code_Gaug
-
@uzanto I'm sorry I can't explain what is happening well.
While VPN is ON the result of 'ip route' shows that tun0 interface is created and up. And the button's color of VPN Tool turns into green.
Doesn't this mean VPN connection is established successfully? -
-
I think I might be having a similar issue with my openvpn connect (not to nordvpn). On my nexus 5 the vpn works fine on wifi and cell service. On my nexus 7 and pinphone using the same keys, certs and settings the vpn connects fine and the routes update but I can't get to the internet. Only difference I saw was that on the nexus 5 (the working connection) the first "default via" entry was for my local router and the second was for the vpn's internal address but on the other devices they were switched around.
The only time I've noticed the nexus 5 not working is if I set up the vpn and the let the phone go to sleep. When I start it back up sometimes I don't have internet access until I turn the vpn connection off and on again.
I'll play around and see if I can spot what's different between them.
-
Considering something is wrong with my Nexus5's system and tryng it again from the beggining I flashed my Nexus5. All things I did before I tried to connect VPN are only to make sshd enable. To get straight to the point, I got the same result. VPN connection is established but name resolutuion doesn't work.
I compared state of networks between Ubuntu Desktop 18.04 LTS and Ubuntu Touch OTA-12.
Note that both of them are on the same local network xx.yy.204.0/24.First, Ubuntu Desktop 18.04 TLS.
Vpn configuration is set by Network-Manager-Gnome(GUI).
It's very easy to configure and works perfectly.( VPN OFF )
$ ip route show default via xx.yy.204.254 dev wlp3s0 proto dhcp metric 600 169.254.0.0/16 dev wlp3s0 scope link metric 1000 xx.yy.204.0/24 dev wlp3s0 proto kernel scope link src xx.yy.204.107 metric 600( VPN ON )
$ ip route show default via 10.8.2.1 dev tun0 proto static metric 50 default via xx.yy.204.254 dev wlp3s0 proto dhcp metric 600 10.8.2.0/24 dev tun0 proto kernel scope link src 10.8.2.8 metric 50 169.254.0.0/16 dev wlp3s0 scope link metric 1000 xx.yy.204.0/24 dev wlp3s0 proto kernel scope link src xx.yy.204.107 metric 600 xx.yy.204.254 dev wlp3s0 proto static scope link metric 600 212.102.51.212 via xx.yy.204.254 dev wlp3s0 proto static metric 600 $ ping -c1 10.8.2.8 PING 10.8.2.8 (10.8.2.8) 56(84) bytes of data. 64 bytes from 10.8.2.8: icmp_seq=1 ttl=64 time=0.073 ms --- 10.8.2.8 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.073/0.073/0.073/0.000 ms $ ping -c1 10.8.2.1 PING 10.8.2.1 (10.8.2.1) 56(84) bytes of data. 64 bytes from 10.8.2.1: icmp_seq=1 ttl=64 time=11.7 ms --- 10.8.2.1 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 11.706/11.706/11.706/0.000 ms $ ping -c1 212.102.51.212 PING 212.102.51.212 (212.102.51.212) 56(84) bytes of data. 64 bytes from 212.102.51.212: icmp_seq=1 ttl=58 time=9.18 ms --- 212.102.51.212 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 9.186/9.186/9.186/0.000 msSecond, Ubuntu Touch OTA-12.
Vpn configuration is set by VPN Tool(GUI).
Client and TLS Certification files are ported from Ubuntu Desktop I mension above.( VPN OFF )
§ ip route show default via xx.yy.204.254 dev wlan0 proto static metric 600 xx.yy.204.0/24 dev wlan0 proto kernel scope link src xx.yy.204.249 metric 600( VPN ON )
§ ip route show default via 10.8.0.1 dev tun0 proto static metric 50 default via xx.yy.204.254 dev wlan0 proto static metric 600 10.8.0.0/24 dev tun0 proto kernel scope link src 10.8.0.4 metric 50 xx.yy.204.0/24 dev wlan0 proto kernel scope link src xx.yy.204.249 metric 600 212.102.51.212 via xx.yy.204.254 dev wlan0 proto static metric 600 § ping -c1 10.8.0.4 PING 10.8.0.4 (10.8.0.4) 56(84) bytes of data. 64 bytes from 10.8.0.4: icmp_seq=1 ttl=64 time=0.117 ms --- 10.8.0.4 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.117/0.117/0.117/0.000 ms § ping -c1 10.8.0.1 PING 10.8.0.1 (10.8.0.1) 56(84) bytes of data. --- 10.8.0.1 ping statistics --- 1 packets transmitted, 0 received, 100% packet loss, time 0ms § ping -c1 212.102.51.212 PING 212.102.51.212 (212.102.51.212) 56(84) bytes of data. 64 bytes from 212.102.51.212: icmp_seq=1 ttl=58 time=11.2 ms --- 212.102.51.212 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 11.278/11.278/11.278/0.000 msI don't know what makes the difference betweem them.
Do I make big mistake?
What do I have to do next? -
@ToxyPoxy I'm very sorry that I've been hi-jacked your subject for a long time.
At last vpn connection works!I use client/tls certification files which is created by Network-Manager-Gnome client on Ubuntu Desktop.
Network-Manager-Gnome client automatically crates these files in '~/.cert/nm-openvpn' directory when you import ovpn file downloaded from Nordvpn's web site.
When I looked into the contents of ovpn file it said like this.comp-lzo no
So when I configured VPN tool on UT I didn't put a check on 'USE LZO data compression'.
But last night I found this warning from '/var/log/syslog'.ubuntu-phablet nm-openvpn[13678]: WARNING: 'comp-lzo' is present in remote config but missing in local config, remote='comp-lzo'Putting a check on 'USE LZO data compression' solve the problem. NordVPN's home page tells me the connection is safe.
Network-Manager-Gnome client automatically sets all items in setting form as written in ovpn file, I set VPN tool on UT as Network-Manager-Gnome client did.
I think this is the easiest way to setup NordVPN connection. This works for ProtonVPN's setting as well.I hope this helps you.
Thank you. -
@Code_Gaug That´s what it´s for! Good work by the way! Just received my Pinephone UB.E. yesterday so I am enjoying that one for the moment.
-
This is exactly the same as I experienced.
-
@Code_Gaug On seeing your post I was relieved because I thought this might allow me for the first time over several attempts ever since my first use of Ubuntu Touch to use my Premiumize VPN connection. But unfortunately it doesn't, not even enabling LCO data compression will help. In sheer frustration and desperation, I am resorting to sharing my OVPN file for one of the connections to see if anyone can help guide me into doing this. The inability to import the file into the UT VPN editor is proving a hindrance, despite my best efforts to import the particulars by manually choosing the settings. Is there something about the way Premiumize configures their VPN settings which precludes them from being used as a VPN with Ubuntu Touch? I don't know. Try to help me out here please, I don't know how to fix it and I need some advice. A step by step guide to the settings given the information I am about to provide would be optimal; I will soon follow up with another post to include some screenshots of the UT VPN editor with the particulars (e.g. username, password) blurred out.
I'll preface this by saying that the certificate has been completely scrambled for the sake of sharing this, so that nobody else can use the certificate for their own means but they can only help troubleshoot. I believe this is the only uniquely identifying information in the .ovpn file but please point out for me if I'm mistaken. I have used both the .ovpn file and the equivalent settings in Ubuntu 18.04 x86's VPN utility which were set when importing the .ovpn file for that system to try to set it up for Ubuntu Touch. Here is the text content of the file:
remote vpn-ca.premiumize.me
verify-x509-name CN=vpn-ca.premiumize.me
auth-user-pass
client
dev tun
proto udp
cipher AES-256-CBC
resolv-retry infinite
nobind
persist-key
persist-tun
mute-replay-warnings
<ca>
-----BEGIN CERTIFICATE-----
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
-----END CERTIFICATE-----
</ca>
verb 3
reneg-sec 0 -
Here are the screenshots:
Note that on this second one the file in the ~/.cert/nm-openvpn directory was initially of .pem type rather than .crt type. I renamed the end of the file to .crt to see if that would help, but alas, still nothing.
If it would help, I could also include screenshots of the OpenVPN settings on Ubuntu 18.04 for a 1:1 comparison. If anyone would like to see them, please ask.
-
perhaps you can test the ovpn out via the command line, i forgot the syntax but it should be fairly simple to use. if that works we can figure out what setting is missing in the configs
-
Thanks, I will try tinkering with that as soon as I have a moment. Meanwhile, I would still appreciate it if anyone can spot anything glaringly wrong with the setup I've tried to go with.
-
@TartanSpartan I would help you anyway.
But as you know I'm not a native speaker of English so I'm sorry for my bad or wrong expressions.
I have many things I want let you know but it's hard for me to write. So I will upload the pictures of my settings. Wait a minute, please.
-
@Code_Gaug Your English seems fine to me on first glance my friend
Thank you for your pictures when they are uploaded. Your help is appreciated.
-
@TartanSpartan Here's my settings
Certification files are just text files.
I used files which created by Network Manager Gnome and files which I myself copied and pasted from OVPN file and both worked fine.If you give settings to VPN like above and it does't work ask me again.
I hope it works fine. -
This post is deleted! -
@TartanSpartan Oh no, now I found Premiumize VPN's OVPN file includes CA certification but no tls-auth certification. I missed that.
So maybe you made settings by following this tutorial.https://www.premiumize.me/plugins?os=ubuntu&tool=openvpn
Making VPN settings with Network Manager Gnome on Ubuntu Desktop, setting file is created in '/etc/NetworkManager/system-connections' directory as well as with VPN Tool on UT.
If connection succeed on Ubuntu Desktop and fail on UT you'd better compare both files. Something might be different from each other.
Would you show me what is different between two setting files?
-
@TartanSpartan Hello
I'm sorry.
Your VPN provider doesn't use tsl-auth certification.
So my settings wouldn't be help for you.If connection results in failure on UT I still recommend you to compare setting files but you can test the ovpn out via the command line as Fuseteam said. Because it shows the reason of failure immediately.
sudo openvpn [ovpnfile name]Password for sudo command is required first then usename & password for VPN are required.
(Note that password phrase may not be shown even if you input)If it works massages end with like following.
Sun Jul 26 09:05:55 2020 Initialization Sequence CompletedThank you.
-
Sorry I went quiet for a while. Thank you for your advice. I've seen a couple of drawbacks with Premiumize in the VPN and otherwise, such as lack of tsl-auth certification as you say, so I might consider moving to Nord when my subscription runs out. But for now I will continue to use Premiumize. Thankfully I was finally able to achieve a VPN connection on my Pro 5 by using
nmclito take the .ovpn file as input along with my username and password, and this also added the connection to the GUI elements so I can turn it on and off with the button. Just what I wanted. I had to do anapt installof the network-manager-openvpn-gnome package for this to work; as VPN editor cannot take .ovpn files at this time, I am looking into raising an issue with Ubports to see if it would be worth including this package in the system image by default. In case this this approach is of interest to anyone else struggling to add a VPN to Ubuntu Touch, the full command used wassudo nmcli connection import type openvpn file "yourfilename.ovpn". I think I had to run it twice for online IP checkers to actually confirm the phone as (supposedly) being in Montreal as was to be expected.However, unfortunately now I have another problem. For personal reasons I have decided to keep my M10 on Vivid OTA-3 until such time as I feel the Xenial build is mature enough to upgrade to. But this does mean it may be vulnerable to bugs which Xenial doesn't have. I wonder if I have discovered one in attempting to apply the VPN to the M10 in the same fashion as for my Pro 5. Here, after running the aforementioned command, it responds
Error: failed to load VPN plugin: missing "plugin" setting. Is anyone familiar with this error? I have searched for it online but can't find the string really anywhere except in the Network Manager source code itself, and there, the code doesn't really help explain what the problem may be at least not to my eyes. It does seem that whether this is a bug or something that can be fixed by installing a package or similar, this situation changed from Vivid 15.04 to Xenial 16.04. Can anyone shed some light? Perhaps it might help if you happen to have your own UT device still on 15.04, or a livecd image of 15.04 to test this on x86 architecture. I had considered just copying the VPN connection file from /etc/NetworkManager/system-connections from the Pro 5 to the M10, but I thought this wouldn't really make sense because for example if they shared the same uuid (which I presume is generated during VPN configuration) as a consequence, then they can't both be on the same WIFI connection simultaneously.
