manual installation instructions for Nexus 5
Where are the manual installation instructions for Nexus 5?
Keneda last edited by Keneda
Why don't you want to use uBports installer? it works fine for N5 i tested it recently.
This post is deleted!
Hi @Keneda, Thank you for your answer.
But I would also like to try at the command line level.
I have find the links about stable,rc,edge and devel, but i can not find the links about recovery.
So i think, if i can to try with TWRP as recovery...
Ingo last edited by
It will not work with TWRP as recovery, the installation process requires the UT recovery.
@Ingo I want to switch from LineageOS to UT.
The recovery is TWRP.
UBports Installer doesn't work, because it doesn't flash the firmware. There is no error, but it is worḱing endless.
What can I do?
How can I switch from TWRP, if that is the reason?
I appreciate any help!
I have never used twrp on my N5 so I suspects that you will need to reflash the "recovery.img" with stock android "recovery.img". Here is the procedure:
Download the factory android images for N5 Hammerhead from here:
extract the zip archive, within that folder, there is another zip archive extract that too. Inside the second folder you'll have the "recovery.img"
Right click on an empty spot in the folder, in the menu click on "open terminal here".
I assume that you'll have adb and fastboot installed.
Enter bootloader by turning off the phone.
Connect the phone to your pc.
Press power and volume down until it enter bootloader mode
In the terminal type this:
You should check if the the pc connects to the phone:
If the pc has connected to the phone proceed with the next step.
fastboot flash recovery recovery.img
fastboot reboot bootloader.
when the phone enters the bootloader again after the last command, run the ubports installer.
I suspect that this is the procedure for unbricking your phone when you forgot to activate usb-debugging in developer Mode. So if there is someone whit a softbricked N5, try the above procedure and make a comment if you are able to use adb when your phone is in recovery.