SMS and call audio not working
-
@standupmobile Hi, I am also in Canada (Winnipeg) on Public Mobile (Telus). I am not having any problems with sms or calling but my data seems to be wonky. I installed UT yesterday and so far I have only seen data work once for only a few seconds. During that time I had my wifi off and I saw a "3G" icon in my top menu. On a similar note, that same 3g icon is always present in the network settings dropdown but I do not actually have data:
I know the 3a was having troubles with data and calls so maybe all the wrinkles have not been ironed out but I wondered if you had any ideas since you are also on a Canadian carrier. I also checked my apn settings and noticed it only had "isp.telus.com" in the internet apn, and the mms was empty. A quick Google search of Public mobile's site shows some data for apn settings but from 2014... I would be happy to help test any of this out and help this build. It has so much potential!
-
@rdl85 Hello, I'm also in Canada (on Fido) and have also had issues with APN settings on the 3a. As far as I can tell the Halium 9 devices seem to have issues with LTE or "Internet and MMS" APN settings. My Nexus 5, which has worked almost flawlessly for over a year only has one APN (Internet and MMS).
My guess is that when registering on the network the phone is not receiving a compatible APN. What I did was to change the seperate MMS and internet APNs and filled them with the same information copied from the one working on my nexus 5.
You can try using the settings from here:
https://www.publicmobile.ca/en/qc/get-help/articles/set-up-data-on-an-android-phone
Fill any fields that you can and change both APNs. Enable them both. Reboot. And let me know if it works. -
@aircooled Hi! Thanks for reaching out. A quick update: I was able to use this page to help my get data working: https://apn.global/ca/public-apn/. That said, I am still running into mms issues. I will look at your link and see if that helps with that lingering issue. The little I read mms is giving other people problems as well so it may not just be by APN settings.
ALSO: my UT journey started with a Nexus 5 and mine also worked flawlessly right out of the gate without me doing anything to the APN settings. If all else fails, I might try and duplicate the APN settings from that phone on my new(er) Pixel 3a.
-
Are the APN settings supposed to match what they are on android?
-
@freefrog They should be similar. Typically android will only have one for both MMS and internet but this doesn't seem to be working on the 3a right now. You can however just make one APN entry for each and just use the same info in both.
-
Hey does anyone know if the workaround has hit stable yet? If not could someone tell me when it does or tell me how to find out?
-
Im on devel channel on Verizon and i cannot send or recieve calls or texts. Apn settings dont usually stick.
-
@triguy I'm sure you've seen the advice, but switching down to 2G / 3G instead of 2G / 3G / 4G helps. Also, doing a hard reset helps. Just shutting down doesn't always work for me, I often have to hold the power button for ~10 secs to restart the device and then networks come back online. I just do this daily at this point and am thinking of switching to Android until this frustrating bug gets resolved.
-
@lythimus said in SMS and call audio not working:
@triguy I'm sure you've seen the advice, but switching down to 2G / 3G instead of 2G / 3G / 4G helps. Also, doing a hard reset helps. Just shutting down doesn't always work for me, I often have to hold the power button for ~10 secs to restart the device and then networks come back online. I just do this daily at this point and am thinking of switching to Android until this frustrating bug gets resolved.
I wish I could but when I was talking to the Verizon rep, he said that they only have 4G/LTE towers with 3G reserved only for grandfathering in old phones. However, my iPhone 5s can connect to 3G but on my UT phone I can only use LTE. If I set it to anything other than 2G/3G/4G it says “denied.” I would be more than willing to help the UT devs get this fixed with some troubleshooting.
-
I have a Pixel 3a which I was running on the Development Channel. After creating the 2 APN's 1 for internet and 1 for MMS, I was able to send/receive SMS/MMS/Calls & data via LTE worked. I think that was on version 240, and it ran pretty stable for a few days. After updating to version 244 & then 246, I was unable to receive SMS/MMS although I could send SMS (I didn't tryp MMS). I was also only able to get about 18 hours of use with light to moderate use (mostly internet browsing and some texting, minimal calls).
I've since gone back to Android as I need my phone to work.
I'm in the U.S. using StraightTalk on AT&T.
I'm willing to re-install UBports to assist with troubleshooting.
Mark
-
@mark1250 The development channel is not suggested as that is, as the name implies, for development. I would go with stable if I was you. Anyway, this is strange because nothing has changed between those versions, at least not on the port side. Might be interesting what the radio logcat has to say:
sudo env LD_LIBRARY_PATH=/vendor/lib64:/system/lib64 /system/bin/logcat -b radio
-
Update on my data situation: I have gotten cellular data to work with an APN edit, however it flickers from working to not working. MMS remains unfunctional and I am unable to edit its APN settings. Calling also does not work. I'm very happy to be making progress
-
@freefrog Does anyone have a working US Verizon mms APN that they would be willing to share with me?
-
@freefrog Sorry I got confusted with the acronyms, I mean sending texts is my problem
-
@fredldotme I re-installed UBports and am on the RC channel. SMS seems to be working. - (Has been working for more than 24 hours).
I tried to checkout the radio logcat;
sudo env LD_LIBRARY_PATH=/vendor/lib64:/system/lib64 /system/bin/logcat -b radio
Gives me:
CANNOT LINK EXECUTABLE "/system/bin/logcat": library "libtls-padding.so" not found.
It seems that I'm missing something.
-
IDK if this info helps but for some reason I can't have the MMS APN without a MMSC value which is blank on android
-
@mark1250 You probably just need to run
unset LD_PRELOAD
beforehand for the command to succeed. -
I had to reinstall and wipe to get onto OTA-16 for some reason, but I'm not having the issue where calls / SMS aren't coming in after not restarting for 8 hours. It's been receiving and sending SMSs for about 18 hours. So I assume the issue is resolved. My 4G is still intermittent for some reason after updating the APN settings for my Ting with my credentials. I haven't tried reverting back down to 2G / 3G.
-
@fredldotme The weird thing for me is that even on devel channels, I cannot even make or recieve calls. I've only ever recieved one call on my Pixel 3a with UT but I missed it and it was probably a scammer or telemarketer lol. When I attempt to make a call out at any point, I hear nothing coming through the speaker and the recipient's phone doesn't ring. It just says "calling" and thats it. Not even a dial tone. I also cannot send or recieve SMS or MMS. I havent been able to configure MMS in my APN settings. It just reverts my changes. I really wish the APN settings could tell you if/which settings are invalid and which ones you need. When I put my SIM card in for the first time, it auto-generated a config that didnt work. I've since copied over settings from Verizon's website and it still doesnt work. Where I live in America, Verizon has no towers less than 4G/LTE. This means that setting my device to 3G or 2G cuts out all my service. The device seems to connect to towers with 4G as I see a signal and an "L" icon. I have only gotten data to work twice by accident but it loaded a single webpage only and then stopped. It also could have been a cached webpage. I think service works periodically for a very small window of time. I am not sure why some people get service with the same phone and I dont but maybe theres differences in hardware between devices too...?
-
@triguy For me switching the "internet" APN profile from whatever it is to "vzwinternet" then restarting helped the data to work. Also I could edit the MMS entry but only after filling in a value in the MMSC field though no edits I made were able to fix the mms. Everything else works the exact way you've said for me