[Porting] Call for Testers

Flohack

@turanmahmudov well then maybe reboot, 1 hour is too much can you do a dmesg on your host and see if a USB device is shown when you connect the phone?

turanmahmudov

@flohack I reboot several times, did the all processes again, no doesn't work.
dmesg logs:

[ 5297.135465] usb 1-1: New USB device found, idVendor=18d1, idProduct=d001, bcdDevice= 3.18
[ 5297.135467] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5297.135468] usb 1-1: Product: Failed to boot
[ 5297.135469] usb 1-1: Manufacturer: Halium initrd
[ 5297.135470] usb 1-1: SerialNumber: Halium initrd Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd

turanmahmudov

@turanmahmudov worked. changed my usb cable and ran these 3 commands manually:

adb push rootfs.img /data/
adb push system.img /data/
adb shell "mv /data/system.img /data/android-rootfs.img"

turanmahmudov

WIFI works but I get certificate error when I visit any website. OpenStore doesn't work either because of the certificate error. Is this normal? Is there anything I can do?

Thanks for the port btw, I was waiting for this to test my apps

turanmahmudov

@turanmahmudov set time manually and the certification error is gone

gupdia

I have a google pixel as a spare and ready do some testing. Let me know!

Flohack

@turanmahmudov Time should sync when you joined a WiFi - Timekeeper might not work after a reboot, yes.

Flohack

@gupdia Yes sure, just follow this thread and you will find my post pointing to instructions.

Flohack

@turanmahmudov if you get telnet mode then rootfs.img was not placed correctly. Dont know what happened with your halium-install, probably you also could not push due to an excess blank in my command ? Please delete all from data and retry the procedure, we must find a way it works for all users

lordzeed

It is working perfect for me, the only thing that does not work for me is the telephone network

turanmahmudov

@flohack said in [Porting] Call for Testers:

if you get telnet mode then rootfs.img was not placed correctly. Dont know what happened with your halium-install, probably you also could not push due to an excess blank in my command ? Please delete all from data and retry the procedure, we must find a way it works for all users

somehow adb doesn't continue after 90% of pushing rootfs.img with the halium-install. I tried several times.

AppLee

@turanmahmudov
Have you tried another cable, bad connection can be due to bad wiring.
Also a mess in the partition table was a problem for some users recently, so I would check this.

lordzeed

Excuse the question, but when will an update come out?

FellFromTheSky

@Flohack
I would want to become a tester for Ubuntu on my smartphone.
It's a Google Pixel XL (1st gen) that have 128 Gb storage and actually running Android 10.
And I would want to completely remove Android from it as soon as possible.
I think I'll need some help to proceed to the installation since it's the first time I install Linux on a smartphone. I saw your post that explains from where to download everything and I'm not sure from where to get everything (e.g. downloads related to Porter) and if it's the right things for my smartphone (according to TWRP mine is marlin not halium ...).

lordzeed

I love this project, please do not abandon it, the work you are doing makes me great

FellFromTheSky

@lordzeed
Did they say that they would abandon this project?

lordzeed

@fellfromthesky said in [Porting] Call for Testers:

Did they say that they would abandon this project?

no, i just say please don't leave it i never said i left it

Flohack

@fellfromthesky Please follow https://forums.ubports.com/topic/5533/porting-call-for-testers/14?_=1613473076161 - It should explain all steps in detail. Your smartphone is marlin, yes, Halium is not a device but the name of the common boot layer we are using...

FellFromTheSky

@flohack

Download the customization of the device: halium-boot, system and vendor image provided by porter

I don't know at all what "porter" is.
Oh you mean those files?
https://twoot.bin.org.in/nextcloud/index.php/s/iAZDDkRYYAiN6Kk?path=%2Fmarlin

Download TWRP Recovery for your device: https://twrp.me/Devices/ - Note: DO NOT download the ZIP file for the TWRP installation that gained work with UT. You just need to download the .img file to get started!

Always the lastest one or a specific one?
https://dl.twrp.me/marlin/twrp-3.5.0_9-0-marlin.img.html

Other steps should be ok.

Keneda

@fellfromthesky said in [Porting] Call for Testers:

I don't know at all what "porter" is.

Here, "porter" is a human with dev skills, that ported uTouch to a device, yours here...