Fairphone 3/3+ (FP3/FP3+) Port - Halium 10

[cr9c]

This post is deleted!

[Luksus]

@oden Hi, I also encountered the heating issue, though I don't know, what caused it.
I noticed, that it gets hot in the lower left corner on the backside, but I don't believe it's caused by the NFC chip...

I got the Impression, that it has somethin to do with mobile data/cellular network.
I believe it cooled down, when I disabled mobile data, and it did not get hot again, after turning it on again...

[Luksus]

Hey, with the latest build video recording should work now.
I also added some short instructions for waydroid in the first post.

[Contralto]

Hi @ all,

I have now time to install and test the newest version again.

Unfortunately I have deleted all my data by unlocking the boot manager
But that makes it a lot easier to back up the data * lool *

I´m currently downloading the image to first flash android and then the halium-image.

Should take a while, I will respond what things are working and what not

[Contralto]

Hi again,

I have installed the new system now.
First thing I try is to use the new anbox.

Anbox-Halium is installed successfully and showing the following:
Kernel: OK
System: OK
Enabled: YES
Running: YES

But, there is always no internet connection
I have installed a app and use adb shell with ping, but no connection
Some ideas ?

I must get some apps working this week or switch again to /e/os.... ;(

[Contralto]

Some more informations:

2|armv7-a-neon:/ $ ifconfig
lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0 
          inet6 addr: ::1/128 Scope: Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:16 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:1 
          RX bytes:1784 TX bytes:1784 

eth0      Link encap:Ethernet  HWaddr b2:73:18:d9:39:98
          inet addr:192.168.250.2  Bcast:192.168.250.255  Mask:255.255.255.0 
          inet6 addr: fe80::b073:18ff:fed9:3998/64 Scope: Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:28 errors:0 dropped:0 overruns:0 frame:0 
          TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 
          collisions:0 txqueuelen:1000 
          RX bytes:2216 TX bytes:2632

ifconfig system itself:

anbox0    Link encap:Ethernet  HWaddr fe:2a:b3:d5:a0:e9  
          inet addr:192.168.250.1  Bcast:0.0.0.0  Mask:255.255.255.0
          inet6 addr: fe80::fc2a:b3ff:fed5:a0e9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25 errors:0 dropped:0 overruns:0 frame:0
          TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2352 (2.3 KB)  TX bytes:1900 (1.9 KB)

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:13594 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13594 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1 
          RX bytes:42874430 (42.8 MB)  TX bytes:42874430 (42.8 MB)

rmnet_data0 Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          inet addr:10.153.4.213  Mask:255.255.255.252
          UP RUNNING  MTU:1280  Metric:1
          RX packets:12 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1088 (1.0 KB)  TX bytes:1000 (1000.0 B)

rmnet_ipa0 Link encap:UNSPEC  HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00  
          UP RUNNING  MTU:2000  Metric:1
          RX packets:10 errors:0 dropped:0 overruns:0 frame:0
          TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:1232 (1.2 KB)  TX bytes:1104 (1.1 KB)

rndis0    Link encap:Ethernet  HWaddr ce:52:67:4b:4b:b2  
          inet addr:10.15.19.82  Bcast:10.15.19.255  Mask:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

rndis1    Link encap:Ethernet  HWaddr 96:9f:ef:40:8c:0e  
          inet6 addr: fe80::f580:2371:b587:c8e1/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

vethG19L1N Link encap:Ethernet  HWaddr fe:2a:b3:d5:a0:e9  
          inet6 addr: fe80::fc2a:b3ff:fed5:a0e9/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:25 errors:0 dropped:0 overruns:0 frame:0
          TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:2702 (2.7 KB)  TX bytes:2636 (2.6 KB)

wlan0     Link encap:Ethernet  HWaddr 84:cf:bf:93:0e:b1  
          inet addr:192.168.178.80  Bcast:192.168.178.255  Mask:255.255.255.0
          inet6 addr: fe80::b9bc:13b6:a60c:f404/64 Scope:Link
          inet6 addr: 2a02:2454:8b64:7400:649b:946e:40d8:5a94/64 Scope:Global
          inet6 addr: 2a02:2454:8b64:7400:8012:a19a:5db9:2495/64 Scope:Global
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:6502 errors:0 dropped:0 overruns:0 frame:0
          TX packets:713 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:395733 (395.7 KB)  TX bytes:95722 (95.7 KB)

sudo anbox-bridge restart:
no errors

Tried on WiFi and on LTE

[Luksus]

@contralto it sounds like if you are using the old anbox... New anbox-halium has nothing to do with anbox-tool app.

Did you follow my updated instructions in the first post?

[Contralto]

Hi @luksus,

Yes, I do your steps and remount the whole system, changed it to the same priority, upgraded the system and then execute the following command:
"wget -O - https://github.com/Anbox-halium/anbox-halium/raw/lineage-17.1/scripts/install.sh | bash"

[Luksus]

@contralto ok, and did you run the container with sudo /home/anbox/run-container.sh ?

[Contralto]

@luksus yes.
But...
Oh...
I think...
...all things must be do/installed in this container ?

Ops, that´s my failure
I will try it again, if I have some time...

[Luksus]

@contralto i will clarify instructions in the first post...

[jesta030]

@luksus Is there a way to buy you a coffee/beer to help developement along? I'd love to have Ubuntu on the Fairphone 3+!

[Luke]

@jesta030 I would want to help too, if possible!

[Luksus]

@luke @jesta030 basically you already can install Ubuntu Touch on your FP3+, as described in the first post.
I use it as daily driver.

@jesta030 please note, that Ubuntu Touch is not Ubuntu (like on desktop). You may be a bit disappointed, if you expect this.