@luksus yes.
But...
Oh...
I think...
...all things must be do/installed in this container ?
Ops, that´s my failure
I will try it again, if I have some time...
@luksus yes.
But...
Oh...
I think...
...all things must be do/installed in this container ?
Ops, that´s my failure
I will try it again, if I have some time...
Hi @luksus,
Yes, I do your steps and remount the whole system, changed it to the same priority, upgraded the system and then execute the following command:
"wget -O - https://github.com/Anbox-halium/anbox-halium/raw/lineage-17.1/scripts/install.sh | bash"
Some more informations:
2|armv7-a-neon:/ $ ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope: Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:1784 TX bytes:1784
eth0 Link encap:Ethernet HWaddr b2:73:18:d9:39:98
inet addr:192.168.250.2 Bcast:192.168.250.255 Mask:255.255.255.0
inet6 addr: fe80::b073:18ff:fed9:3998/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:28 errors:0 dropped:0 overruns:0 frame:0
TX packets:24 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2216 TX bytes:2632
ifconfig system itself:
anbox0 Link encap:Ethernet HWaddr fe:2a:b3:d5:a0:e9
inet addr:192.168.250.1 Bcast:0.0.0.0 Mask:255.255.255.0
inet6 addr: fe80::fc2a:b3ff:fed5:a0e9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0 frame:0
TX packets:29 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2352 (2.3 KB) TX bytes:1900 (1.9 KB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:13594 errors:0 dropped:0 overruns:0 frame:0
TX packets:13594 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:42874430 (42.8 MB) TX bytes:42874430 (42.8 MB)
rmnet_data0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.153.4.213 Mask:255.255.255.252
UP RUNNING MTU:1280 Metric:1
RX packets:12 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1088 (1.0 KB) TX bytes:1000 (1000.0 B)
rmnet_ipa0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
UP RUNNING MTU:2000 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1232 (1.2 KB) TX bytes:1104 (1.1 KB)
rndis0 Link encap:Ethernet HWaddr ce:52:67:4b:4b:b2
inet addr:10.15.19.82 Bcast:10.15.19.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
rndis1 Link encap:Ethernet HWaddr 96:9f:ef:40:8c:0e
inet6 addr: fe80::f580:2371:b587:c8e1/64 Scope:Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
vethG19L1N Link encap:Ethernet HWaddr fe:2a:b3:d5:a0:e9
inet6 addr: fe80::fc2a:b3ff:fed5:a0e9/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:25 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2702 (2.7 KB) TX bytes:2636 (2.6 KB)
wlan0 Link encap:Ethernet HWaddr 84:cf:bf:93:0e:b1
inet addr:192.168.178.80 Bcast:192.168.178.255 Mask:255.255.255.0
inet6 addr: fe80::b9bc:13b6:a60c:f404/64 Scope:Link
inet6 addr: 2a02:2454:8b64:7400:649b:946e:40d8:5a94/64 Scope:Global
inet6 addr: 2a02:2454:8b64:7400:8012:a19a:5db9:2495/64 Scope:Global
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6502 errors:0 dropped:0 overruns:0 frame:0
TX packets:713 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:395733 (395.7 KB) TX bytes:95722 (95.7 KB)
sudo anbox-bridge restart:
no errors
Tried on WiFi and on LTE
Hi again,
I have installed the new system now.
First thing I try is to use the new anbox.
Anbox-Halium is installed successfully and showing the following:
Kernel: OK
System: OK
Enabled: YES
Running: YES
But, there is always no internet connection
I have installed a app and use adb shell with ping, but no connection
Some ideas ?
I must get some apps working this week or switch again to /e/os....
Hi @ all,
I have now time to install and test the newest version again.
Unfortunately I have deleted all my data by unlocking the boot manager
But that makes it a lot easier to back up the data * lool *
I´m currently downloading the image to first flash android and then the halium-image.
Should take a while, I will respond what things are working and what not
Just for info: 2G data does not work on my FP3+
I will switch to /e/ os next week, because I must have some apps for charging my car.
I hope, that you will get it working
Hello @ all.
I have added some Issues to the GitLab site.
I hope, that was OK @Luksus ?
Link to GitLab:
https://gitlab.com/luksus42/fairphone_fp3/-/issues
All right.
I have fully reinstalled the original OS and tested everything.
Now I have the ubtouch again with fully wiped data partition.
What´s not working:
@stanwood I will install the original system tomorrow and try to make a call.
If it works, I reinstall ubtouch and wipe also the data partition.
I have only test the things today.
It´s the first time I´m using ubtouch.
I miss only my password manager as application...
If the calls are working and internet via 3g or lte, it´s perfekt and I will use it every day.
@stanwood Yes.
I can write and receive text messaged and I can call and receive a call.
But there is only no sound in the call.
On the other side, there is also no sound.
So it seems sound and microphone seems not to work.
@luksus Have tried.
Not working.
I can change the Master volume and Input Volume in uVolMan.
It´ s at max now an nothing happens.
Can I generate a log file for you ?
Oh, Bluetooth headset connected, but I cannot change the output source
@luksus It´s not ringing and I can´t hear anything.
The call is established successfully
System sounds are working...
I will try to connect a bluetooth headset and tell you again, please wait...
@luksus Ah ok, I will try it tomorrow.
I found a other bug:
If I call someone, there is no sound on the phone call...
Okay...
So installation success.
Boots if I first start it with the recovery mode !
I have tested many things and have more info for you:
If I start a navigation program, the compass and GPS seems not to work.
And there is not internet connection through 3G/LTE.
All other functions are working nicely.
If you can fix the above, you are my man
Hello @luksus !
My brand new Fairphone 3+ should arrive today.
The first thing I will do is to install your FP3+ Port !
Keep up that great work !