@Luksus
I followed some tutorual that recommended above steps.
I suppose by removing the Pictures directory the camera app could't find that dir anymore.
So i installed the os again and tried the camera: works perfectly on internal memero and on SD after changing the settings.
Just got to figure out now on how to save screenshots on SD, ... and a whole lot more stuff

@Luksus I'm having problems with the camera.
Don't know if it is FP3 issue or the fact that i'm using an SD card now.
When i take a picture I get an error that the camera can't store the image and that i have to reboot my device. Rebooting doesn't work. When i take a screenshot, i can't find it under the Screenshots directory.

I've executed:

rmdir Pictures/
ln -s /media/phablet/FAIRPHONE/Pictures Pictures

So I have the symbolic link for Pictures and Screenshots in my home folder.

@luksus said in Fairphone 3/3+ (FP3/FP3+) Port - Halium 10:

Anbox-Halium

All right, no problem there, i have patiece
I guess you will make a post here when it is more stable?

Thanks for your time you put into this development!

@Luksus Thank you so much! Works like a charm here. Still got to test if phone calls are working...
Anbox works, but installed apps have no internet connection. Does anybody found a solution for this?
Edit: just called 'the speaking clock'. Still works here

GPS works fine here.
The only 'hardware' that doesn' work is 3G/4G @Luksus is this something you could fix? This is the only thing i realy mis.
I gave up on finding out why anbox doesn't has the shared internet connextion - any tips?
Installed some apps from ubuntu - this is great

Kind regards,
Koen

@thrill_seeker I had the same issues, been playing with this now since this morning.
When you are in the fast boot mode, there is an option to do a recovery.
I re-installed this multiple times now and each time i have to do a recovery. After that things start to work

@Luksus
Found out some more problems:

• When the screen appears for entering pin code, there also is a keyboard that pops up. Impossible to press the button to accept the pin code then. When i push the on/off button twice, the keyboard is gone and i can enter pin.
• Sometimes i have no wifi icon, but wifi allways works.
• Mobile signal has a x but phone calls works.
• I can enable Anbox now and even install apllications, which is great, but the network is not shared to anbox, althow when i take a look with ifconfig it appears to be correct.
• Anbox applications (testing with DavX now) does not allways starts - first time it works, also after a reboot but then it hangs on a black screen.
• After a reboot i have all the apps included in Abox twice on my screen

Thank you so much for following this up.

@Luksus
Anbox is ready to rock!

At first I had no reception on mobile. Wifi was working.
I shut down the phone, removed battery, switched SIM1 -> SIM2.

After that i have no longer wifi, but guess what, cellular data is working now making calls, no problem.

EDIT. My mistake. SIM2 works for calling, no cellular data, wifi works but doesn't show networks anymore. So i don't see i have wifi connection, but i'm connected.
And seems like i can't use the SD card.

EDIT2: After another reboot wifi's are showing up again, but have the indication that i am not connected to cellular network, but can make calls.

@luksus Thanks, will update today!
After some days of testing i must say that my wifi signal is weaker as before.
Sometimes I don't have reception of my gsm provider, while it is indaicated as connected. Enebeling and disableing 2/3G fixes this apperantly. Missed some calls that i noticed after a reboot. While talking to a person, sometimes the other person doen't understands me (weak signal i suppose)

@luksus said in Fairphone 3/3+ (FP3/FP3+) Port - Halium 10:

@koens No, Anbox is not supported yet and there is no other way...
Until some days ago, Anbox did not work for arm64 anyway, that is why I did not apply it to the kernel, yet.
But since it works, I will try to apply the necessary patches to the kernel.

Good luck with that. Looking forward to this

@Luksus it seems that Anbox is not supported yet, is that correct? Any other way to install apk files?

@luksus i must say i had some problems with the connection to my cellular network. When Mobile Internet is enabled, it only works when i choose 2G/3G If 2G/3G/4G is selected then i have no connection at all.

Thanks. Made it work by ssh over wifi. Synchronized my contacts from my Nextcloud server

@luksus no problem, with much pleasure ;-).
Just testes again to be sure. Wifi and incomming calls are working.
Just trying to access adb shell. Strange thing is that in device manager my device is now a Remote NDIS based Internet Sharing Devices. Only in boot mode I get ADB.
I follow this tut: https://docs.ubports.com/en/latest/userguide/advanceduse/adb.html but just can't get it to work

@Luksus
Same story here, works as you descibed but had to clean data partition with TWRP prior to installation.
I have to say my phone rang when i had a call, so that seems to work too.
Just no mobile data so far.
So happy with this! Thanks a lot!

Damn it, i'm tired of seeing the FAIRPHONE (powered by android) screen.

Yesterday i've got Ubuntu Touch working after installing Android 9, but nothing of the harware worked.
So today i reinstalled Android 10. Then i tried with /e/ which worked fine.

But i am a Linux user and the reason i purchasted the Fairphone 3+ was the capability of using Ubuntu. (I'm a iphone user since the iPhone 3 came out).

So I installed Android 10 again, then I tried both options from the first thread multiple times - allways preceded with installing Android 10 , but i allways get stuck on the FAIRPHONE logo.

I'ts time to go to bed now, wonder what i will do tommorow...

@luksus Damn, I installed Android 9, same problem, no camera, no audio :-(.

So i suppose Ubuntu Touch is based on Android9? Any idea if and when an update will be available?

@luksus Dont know, I will install android 9 again and give it a try.

@janez
I had the same error, but i managed to solve it with adding this parameter at the end.
-S 522239K
Maybe it can help you.

@Luksus
Many thanks for the instructions and information you offer her

I bought myself a FP3+ yesterday and started trying to install Ubuntu Touch on this device.

For the moment, the OS is running, but I can't use my hardware (only the screen).
No sound, no camera, no mic,... I can make a phonecall but can't hear anything. On the other side also no sound.

Do you (or anybody else) can inform me what i did wrong, or what i can do to make the hardware operational?

Many thanks!