UBPorts Installer and stock unlocked Nexus 5 - can't install

touchyfeely

@Lakotaubp Yup, developer mode is enabled, USB debugging enabled. The UBPorts installer sees the Nexus 5, and once I select my install options - 15.04/stable, wipe device, eye candy, for example - the phone boots to the bootloader and then it just sits there.

Also, the USB cable works fine. I reflashed the Nexus 5 back to stock Android 6.0.1 from the Google factory images.
@dobey Bootloader is definitely unlocked. I used to run Cyanogenmod on it (heh) with TWRP. But I reflashed back to stock Android and recovery just in case that was causing issues with the UBPorts installer.

touchyfeely

And just to add; there is no SIM card in the phone. This phone isn't my "daily driver" when it comes to phone calls and texts. But, like I said, it's been unlocked and it has had Cyanogenmod and LineageOS on it before. It's running stock Android 6.0.1 from the factory image supplied here: https://developers.google.com/android/images .

Do I need a SIM in the phone for this to work? I would certainly hope not.

touchyfeely

As a potential workaround, I came across this:
https://github.com/ubports/wiki.ubports.com/blob/master/How-to-install-Ubuntu-Touch-16.04.md

advocatux

@touchyfeely for Mac, the usual problem is that the tools are not in the $PATH of the user.

You can try to run sudo open -a ubports-installer too

For Debian, I've found that sometimes the appimage package works better than the deb package

dobey

No, a SIM is not required.

And there is no zip to install as you would for Lineage or other Android ROMs, as UT is not an Android ROM.

Under Debian, you do have the adb and fastboot tools installed and in $PATH correct? And fastboot devices and adb devices show the device, when in appropriate modes of the phone?

touchyfeely

@advocatux I've installed the android platform tools via brew on MacOS. From my a terminal I can certainly run adb or fastboot. But, here's the thing: if it was a PATH issue, I would assume that UBPorts wouldn't call fastboot to reboot the device to the bootloader. But it does, but I'm open to any suggestions.

@dobey Yes, I just browsed the system-image.ubports.com site, and I see it's some combination of json and .xz files; neat. I have adb and fastboot in the standard PATH from the android platform tools I installed. However, I'm using the SNAP version, which, if I understand correctly is like Flatpak in that it's all self-contained.

advocatux

@touchyfeely when the installer calls fastboot, does it work properly? If it fails, is there anything relevant in the installer log?

I can only add that when all the necessary software is in place, it could be a problem with the usb cable. I can't count how many installation have failed for that reason (sometimes using another usb port also helps)

touchyfeely

@advocatux I've used this same cable to reimage/flash the Nexus 5. The cable works, AFAICT. The installer recognizes the Nexus 5. I select my install options, and then the phone reboots to the bootloader. I think that's from calling fastboot to reboot the phone to the bootloader, correct?

Where would I find the UBPorts Installer log for Mac? I'll pull that and see if that explains why it's not working.

advocatux

@touchyfeely I don't know where the installer puts the log in a Mac, sorry. Can you look for "ubports" or "ubports-installer"?

To give you a general idea, deb log is in ~/.cache/ubports, snap log is in ~/snap/ubports-installer/current/.cache/ubports and in Windows is some place in %APPDATA%

touchyfeely

@advocatux I'm not in front of the Macbook right now, but I'll see what the logs say when I am, and I'll post here.

advocatux

@touchyfeely look, only 21 minutes ago https://forums.ubports.com/post/13338 XD

touchyfeely

@advocatux Well, I'll certainly try another USB cable - just in case - but, as I pointed out earlier, if it really was the cable, I would think it would've given me grief when I reflashed the Nexus 5 back to the stock Android 6.0.1 from Google, right? Or, for instance, when I flashed LineageOS on it yesterday, right?

advocatux

@touchyfeely from my experience helping in the Install group, I can tell you that ubports-installer is a lot more picky with usb cables than any other installer

touchyfeely

@advocatux Here's the output from a terminal from macOS 10.13 (High Sierra):

gondor:~ wls$ which adb
/usr/local/bin/adb
gondor:~ wls$ which fastboot
/usr/local/bin/fastboot

gondor:~ wls$ adb devices
List of devices attached

daemon not running; starting now at tcp:5037
daemon started successfully
093f6271006d0ccd device

The UBPorts log is under /Users/<username>/Library/Caches/ubports/ubports-installer.log

From the log:

{"level":"debug","message":"adb shell: echo 1","timestamp":"2018-10-13T01:03:08.934Z"}
{"message":"Command failed: /var/folders/lj/hr4c1zyx4hq5g3hxkhv3vm6m0000gn/T/.com.ubports.installer.K7e0Ud -P 5038 shell echo 1\nerror: no devices/emulators found\n","stack":"Error: Command failed: /var/folders/lj/hr4c1zyx4hq5g3hxkhv3vm6m0000gn/T/.com.ubports.installer.K7e0Ud -P 5038 shell echo 1\nerror: no devices/emulators found\n\n at ChildProcess.exithandler (child_process.js:282:12)\n at emitTwo (events.js:125:13)\n at ChildProcess.emit (events.js:213:7)\n at maybeClose (internal/child_process.js:921:16)\n at Socket.stream.socket.on (internal/child_process.js:348:11)\n at emitOne (events.js:115:13)\n at Socket.emit (events.js:210:7)\n at Pipe._handle.close [as _onclose] (net.js:549:12)","killed":false,"code":1,"signal":null,"cmd":"/var/folders/lj/hr4c1zyx4hq5g3hxkhv3vm6m0000gn/T/.com.ubports.installer.K7e0Ud -P 5038 shell echo 1","level":"debug","timestamp":"2018-10-13T01:03:09.051Z"}
{"level":"debug","message":"adb shell: echo 1","timestamp":"2018-10-13T01:03:10.064Z"}
{"level":"debug","message":"","timestamp":"2018-10-13T01:03:10.223Z"}
{"level":"debug","message":"adb shell: getprop ro.product.device","timestamp":"2018-10-13T01:03:10.226Z"}
{"level":"debug","message":"","timestamp":"2018-10-13T01:03:10.406Z"}
{"level":"debug","message":"getprop: hammerhead","timestamp":"2018-10-13T01:03:10.408Z"}
{"level":"debug","message":"adb shell: cat /etc/system-image/channel.ini","timestamp":"2018-10-13T01:03:12.095Z"}
{"level":"debug","message":"","timestamp":"2018-10-13T01:03:12.298Z"}
{"level":"debug","message":"adb shell: echo 1","timestamp":"2018-10-13T01:03:28.076Z"}
{"level":"debug","message":"","timestamp":"2018-10-13T01:03:28.264Z"}
{"level":"debug","message":"reboot to bootloader","timestamp":"2018-10-13T01:03:28.277Z"}
{"level":"debug","message":"","timestamp":"2018-10-13T01:03:28.867Z"}
{"level":"debug","message":"reboot to bootloader [DONE] err:null","timestamp":"2018-10-13T01:03:28.868Z"}
{"level":"debug","message":"checking password","timestamp":"2018-10-13T01:03:33.845Z"}
{"level":"debug","message":"correct password","timestamp":"2018-10-13T01:03:34.969Z"}
{"level":"debug","message":"fastboot: wait for device","timestamp":"2018-10-13T01:03:34.971Z"}

touchyfeely

It's also worth noting that the "Report a Bug" button on the installer, at least on my Macbook, doesn't do anything you'd expect - like, open a webpage to report a bug.

touchyfeely

Also, to note, while UBPorts Installer is waiting, I can fire up a terminal and run the following:

gondor:~ wls$ fastboot devices
093f6271006d0ccd fastboot

touchyfeely

So, the work-around I mentioned above actually works. After trying the SNAP UBPorts Installer on my Debian Sid box, and essentially getting the same results as the macOS counterpart, I decided to try this:

wls@rivendell:~/Downloads$ sudo /usr/bin/ubuntu-device-flash --server=http://system-image.ubports.com touch --device=hammerhead --channel=ubports-touch/16.04/stable --bootstrap --wipe
2018/10/12 20:24:03 Device is |hammerhead|
2018/10/12 20:24:04 Flashing version 3 from ubports-touch/16.04/stable channel and server http://system-image.ubports.com to device hammerhead
56.60 MB / 56.60 MB [====================================================================================================================================================] 100.00 % 8.42 MB/s
378.89 MB / 378.89 MB [==================================================================================================================================================] 100.00 % 7.45 MB/s
/root/.cache/ubuntuimages/ubports-touch/16.04/stable/hammerhead/version-3.tar.xz
/root/.cache/ubuntuimages/gpg/image-master.tar.xz
/root/.cache/ubuntuimages/pool/keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz
/root/.cache/ubuntuimages/gpg/image-signing.tar.xz
/root/.cache/ubuntuimages/pool/device-964a84f55b03eca87dacd34dffc9c61c4b50ae471c6b675eafdc2a2eacfad29c.tar.xz
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/ubports-touch/16.04/stable/hammerhead/version-3.tar.xz to device
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/gpg/image-master.tar.xz to device
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/pool/keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz to device
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/gpg/image-signing.tar.xz to device
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/pool/device-964a84f55b03eca87dacd34dffc9c61c4b50ae471c6b675eafdc2a2eacfad29c.tar.xz to device
2018/10/12 20:25:15 Start pushing /root/.cache/ubuntuimages/pool/ubports-1e002fd7e685421651a9b8dc15b0147c4460993169acd0519183533f17331c84.tar.xz to device
2018/10/12 20:25:15 Done pushing /root/.cache/ubuntuimages/gpg/image-master.tar.xz to device
2018/10/12 20:25:15 Done pushing /root/.cache/ubuntuimages/ubports-touch/16.04/stable/hammerhead/version-3.tar.xz to device
2018/10/12 20:25:15 Done pushing /root/.cache/ubuntuimages/pool/keyring-4c4e7ef380ebcfa2c31084efa199138e93bfed8fc58aa3eb06bdf75a78af9b57.tar.xz to device
2018/10/12 20:25:15 Done pushing /root/.cache/ubuntuimages/gpg/image-signing.tar.xz to device
2018/10/12 20:25:32 Done pushing /root/.cache/ubuntuimages/pool/device-964a84f55b03eca87dacd34dffc9c61c4b50ae471c6b675eafdc2a2eacfad29c.tar.xz to device
2018/10/12 20:26:22 Done pushing /root/.cache/ubuntuimages/pool/ubports-1e002fd7e685421651a9b8dc15b0147c4460993169acd0519183533f17331c84.tar.xz to device
2018/10/12 20:26:22 Created ubuntu_command: /root/.cache/ubuntuimages/ubuntu_commands901896083
2018/10/12 20:26:22 Rebooting into recovery to flash

And Success! I was able to successfully install 16.04/stable onto my old Nexus 5.

Lakotaubp

@touchyfeely Congratulations and welcome to UBports Ubuntu Touch.

advocatux

@touchyfeely I'm glad you finally did it. Enjoy your new UT device!

PS If you need to paste any log output it's better to pastebin it and put the link here. You can use https://paste.ubuntu.com/ or any other similar service for that

touchyfeely

@advocatux Sure. But, since the output wasn't too egregious and - if some poor soul runs into the same kind of issues I have encountered - then the resulting index in DuckDuckGo or Google can help them in a single thread.

Next up: Libertine containers and running Firefox and a terminal. Bluetooth keyboard and mouse are ordered.