-
@Litcornes i disabled the resize function in the halium-install script and i managed to finish the images and copy them to the phone.
The problem after that for me was that libgui.so library doesn't load... so lightdm keeps crashing.
Haven't done anything else with it...You can disable the resize function in the file named core.sh in the functions folder of the halium-install cloned repository.
The line to comment out is this one
[ -f "$IMAGE_DIR/system.img" ] && sudo resize2fs -p -M "$IMAGE_DIR/system.img"Just put a # in front of that line.
-
@Litcornes btw... the armhf rootfs will most likely not work... from what i could see most librarys in the system image are 64 bit. So they won't load on the armhf version. You'll need the arm64 rootfs.
When i tried the armhf rootfs the system would boot and i could ssh into it... but lightdm wouldn't start properly.
On arm64 rootfs it doesn't boot... it keeps resetting.
Maybe you have more luck with it...
If you manage let me know what you did
-
@franky32 Thank you for your anwers, i did managed to get it working. I did what you said, comment out the line and the script did worked. I've listened to you and used this : xenial-hybris-edge-rootfs-arm64. Then i followed every steps listed here : https://forum.xda-developers.com/v20/development/ubuntu-touch-wip-lgv20h918-t4002579.
Et voilà, every things seems to be working as intended (as listed in the post). I'm a casual so if i did something wrong don't hesitate. -
@Litcornes did it boot up into the ubuntu interface? cause when i try that rootfs it spits out an error with the ssh.override missing...
-
@franky32 yes it did boot up after proceeding the adb command and the install of halium boot.
-
@Litcornes what android did you have on your phone? Maybe it's dependent on the version of android... even though i tried with 7...8 and lineage os 14.1...
-
@franky32 i had installed this : https://forum.xda-developers.com/lg-g6/development/rom-havocos-v2-1-t3893668 and i was using this version of twrp :https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
-
@franky32 this rom is based on android 10
-
@Litcornes i'll give it a try...
-
@franky32 it was the rootfs
the one you used worked for me as well... just that i selected the wrong one the first time i tried after downloading it -
<rant>
I saw this post and immediately bought a used LG G6. Unfortunately it was the LS993 model which can't fastboot. So was totally excited to install and test your port, @Guf ... but won't be able to.
</end of rant>
-
@enrolado I found this post where they said that you need to visit a support center. But I suppose the main issue might be Sprint firmware. Now, I don't know which hardware differences yours might have versus h870, they are probably firmware based.
Try to unlock it officially by requesting unlock.bin, then let's see what we can do -
Hello! When i first started to hear about Ubuntu on Lg g6, I imedietly jumped to my mom's phone to try it out. I'm just a begginner and know absolutely nothing about how to install this OS. Can somebody help me?
I already unlocked my phone, and managed to install twrp (idk if I did it okay). My phone model is h870, EU version. I'd want to experience the Ubuntu OS at the earliest possible moment. Thanks! -
@T0p0r
Is your mum ok for you wiping her phone out?
-
@Keneda yes, because I would trade with my phone (which is much better). But you didn't answered my question.
-
@T0p0r Sorry i have a MX4 so can't tell...
What i can tell is if you want to use uTouch as a daily phone OS, you should choose a full supported device. -
@vadikas I am dealing with the same situation and the patch did not resolve the issue. Have you succeeded in solving this?
-
@Guf said in Ubuntu Touch on LG G6 (h870 model): call for testers:
@makeixo @walidham Fixed! I applied the patch for bullhead which suggested the same: to disable CONFIG_ANDROID_PARANOID and to enable SECURITY_ANDROID_GID_CAPABILITIES, but I hadn't done it well. With the help of @tanevanwifferen (who suggested what was wrong), we fixed it ... so let's go for other issues, now
Could you be more specific, please? I am porting the LG G4 and the patch did not resolve the issue. But then my port is also based on a different kernel version (the 3.10). Don't know how relevant the fix is for my version?
Ari
-
Now I also managed to install this port on my European LG G6.
UBports looks great on this device and makes a good impression.
There are a few things I'm currently not sure if I made a mistake during the installation or if it's just the unfinished port.
Programs always seem to start in window mode or the interface in general is not adapted to the display size.
Do I have an error in the installation or is it just the optimization missing?
Otherwise very good work, I hope this port will be further developed.
I would be very happy to have a full UBPorts on the LG G6. -
Sorry for the double post, I found out that the problems are probably caused by the port and not by my installation.
I would like to know if they are currently working on this port and how I could support the developers? @Guf or @tanevanwifferen
Are there any tests that can be done or how can the development be driven forward?
