Oneplus 3/3T
-
@3T_Ed To move to the standard update cycle just change to devel in system settings. That puts you on a more stable footing than being on the edge. Nothing else changes. As for camera I only have the OP3 and that did not change workability on devel, camera worked video didn't, but the OP3t is different. As for the splash screen the installer did not install that last time I tried.
Using the installer didn't change anything else app wise when I last used it either. Just don't select wipe. -
I was recently testing ubports GSI for OnePlus 3T, and Camera experience there was great. Much faster switching between cameras, faster recovery after taking photo, video recording worked, even video playback works. I think that are last pieces for this phone to get properly working. Would be possible to take advantage of this for Halium 7.1 port?
-
Until last Friday I was on
devedit: Release Candidate channel and changed it back to Edge. I will switch back to dev again.As the blog post mentioned the OTA-13 would be beneficial for OP 3/T, in combination with Gst-droid, so I was hoping to get the one thing that keeps me from using the phone as my daily driver: the camera app.
The blog post mentions to use the installer, whereas your advice is to just switch to dev channel. Will OTA-13 include the Gst-droid camera for 3T then? Without having to re-install UT?
-
Anyone else have problems with display auto-rotate since recent (470+ish) updates?
-
Received OTA-13 on stable channel and it is great to have that much faster browser experience. The text handles are very usefull. Thank you all who have been working on the new release.
As per the latest blog post on OTA-13
βMagnetic phone sleep covers will now cause some devices to sleep and wake.βI can confirm this works for OnePlus 3/T using Nilkin flipcover
-
Regarding he notification bar and its icons
-
Is there an option to change the order/position in which they are displayed from left to right?
-
When pulled down the active icon (green) and its menu seems to be random every time the phone (re)boots. Is there any way we can have a pre-selected icon by default?
-
-
- I think there was some talk regarding this for the Yolla Phone to avoid the display notch. Might be upcoming.
- The pull-down is gesture based. You can try to hit the right icon with your finger directly (so it isn't random, but based on where you place your finger), but otherwise just move the finger left or right to swap the menus.
-
@poVoq said in Oneplus 3/3T:
- I think there was some talk regarding this for the Yolla Phone to avoid the display notch. Might be upcoming.
- The pull-down is gesture based. You can try to hit the right icon with your finger directly (so it isn't random, but based on where you place your finger), but otherwise just move the finger left or right to swap the menus.
Thank you for that. I will search for the Yolla Phone comment mentioning that. It would be nice to have the feature be implemented for all devices. Pulling down the top bar needs to be done with pinpoint precision to swap menus. I'm getting the hang of it. Thanks again.
-
Hmm, I seem to have problems installing this on my Oneplus3 coming from a Linage OS 17
Initially I tried to just use the installer, but had to manually select the OnePus3(T) and it installed the bootloader and went through the installation process resulting in a success message, but the Phone itself ended up in a non bootable state. First it went strait back to the Ubports recovery and after another reboot would show the Linage OS boot logo but not proceed.
So I reflashed TWRP wiped all the partitions under "advanced wipe", made sure all is in EXT4 (had to reformat one) and then restarted the installer. This time it recogized the device fine and would again say all installed fine. But now I am stuck in a bootloop to the Ubports recovery.
I will try flashing TWRP again to see if I might have missed something, but I am a bit stuck
Edit: After reflashing TWRP I also used the "reformat" option on the partitions in TWRP. Then used the installer again. Again it found the OnePlus3 correctly and claimed to have installed correctly.
Then it rebooted, was stuck on these swirly multicolor rings for a while, then rebooted again and now I seem to have a working Ubuntu Touch -
Adjusting display brightness isn't working on OTA-13 with the OnePlus3?
Edit: working after a restart. Phew, I was starting to worry about my eyesight -
Anyone has a suggestion how to fix the silent mode slider button? It was working on first boot of the system, but now it doesn't seem to register any longer.
-
@poVoq said in Oneplus 3/3T:
Anyone has a suggestion how to fix the silent mode slider button?
Do you mean the physical button (top left)?
When sliding that button the speaker icon in the top bar/toggle is striked through/muted on my 3Tedit: I'm on stable channel
-
@3T_Ed said in Oneplus 3/3T:
@poVoq said in Oneplus 3/3T:
Anyone has a suggestion how to fix the silent mode slider button?
Do you mean the physical button (top left)?
When sliding that button the speaker icon in the top bar/toggle is striked through/muted on my 3Tedit: I'm on stable channel
Ah a reboot seems to have fixed it. Odd.
-
Any idea what could be causing my OnePlus3 to be partially in Window mode, despite being set to staged?
See related discussion: https://forums.ubports.com/topic/4998/differences-in-qtwebengine-rendering/13I noticed that the BottomEdge is displayed as if there was a mouse connected, and sometimes I shortly see a mouse-pointer on the circle screen appearing.
-
My OP3 runs an edge version from 2020-07-21. I would like to switch to another channel ("dev"), but only "edge" is offered under Updates|Update settings|Channels.
-
@sven You should be able to move to dev iirc and you are upto date with updates. So recheck updates and channels. If not rerun through the installer don't select the wipe option and do it that way.
-
@Lakotaubp Thanks for your suggestions. I checked again: no other channels available (probably the installed one was an early one). Now I am trying the ubuntu installer 0.5.2-beta. My OP3 is running, developer mode is on, but the installer is only showing
Waiting for device
.If I select the model by hand, installation ends with
lost connection
. I am using the official OP3, red USB cable. -
@sven Perhaps try dropping down an installer version or two. I must admit to not trying the new beta one yet.
Edit Or 0.5.3 from here https://forums.ubports.com/topic/5008/testing-request-ubports-installer-0-5-3-beta -
@sven said in Oneplus 3/3T:
red USB cable
That means quite nothing.
USB 2.0 capable cable is required, and usb 2.0 port is needed (not 3.0 one!).
Then if you can access your data under androΓ―d on your PC with usb 2.0 cable on usb 2.0 port, USB data is working well and that should work for installing ubports.
-
@Lakotaubp I tried 0.5.3 beta without any change. Probably the reason is simple:
fastboot devices
won't show the OP3. In syslog, the following appears when I plug in the USB cable:Oct 9 22:07:53 kernel: [101154.624051] usb 1-3: new high-speed USB device number 16 using xhci_hcd Oct 9 22:07:53 kernel: [101154.774090] usb 1-3: New USB device found, idVendor=05c6, idProduct=f003, bcdDevice= 3.18 Oct 9 22:07:53 kernel: [101154.774095] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Oct 9 22:07:53 kernel: [101154.774099] usb 1-3: Product: Android Oct 9 22:07:53 kernel: [101154.774102] usb 1-3: Manufacturer: Android Oct 9 22:07:53 kernel: [101154.774104] usb 1-3: SerialNumber: 0123456789ABCDEF Oct 9 22:07:53 systemd-udevd[59957]: 1-3: Process '/usr/lib/snapd/snap-device-helper bind snap_ubports-installer_ubports-installer /devices/pci0000:00/0000:00:14.0/usb1/1-3 189:15' failed with exit code 1.
Should I move this to a new topic?