Google Pixel 3a (sargo)
-
@dieharddan In that case maybe removing the existing file and pasting it using
busybox vi
would solve the issue. The ofono config though seemed unhelpful in resolving all issues I keep having, maybe it has to do with different carriers behaving differently now, I certainly receive SMS anyway but sometimes signal drops without indication and stays unresponsive. I don't know why the ofono-ril-dance doesn't work the way it's supposed to work yet so it might be interesting to find out. -
You may be right, but I'm willing to try it anyway, though I'm not certain how to use busybox as I am not familiar with that
-
@dieharddan In case something went wrong with the config you can re-install without wiping using the Installer of course, but what you could do to get some details is (in the running system, ie not the recovery):
setprop persist.vendor.radio.adb_log_on 1 sudo reboot
And after the device is back up:
sudo env LD_LIBRARY_PATH=/vendor/lib64:/system/lib64 /system/bin/logcat -b all
It hopefully shows what the error in your case is, else you would have to figure out a way to debug on your own.
Btw, does your device report itself as bonito or sargo in the recovery adb shell and in system-settings?
-
I dont see a model listed in the recovery screen, the system settings say "Google Pixel 3a"
-
@dieharddan Hm ok. Regarding recovery: I mean when you go into recovery mode, connect the phone and enter
adb shell
on your PC, is it saying sargo or bonito? -
@fredldotme ah I see, yes that also says sargo
-
@fredldotme said in Google Pixel 3a (sargo):
@dieharddan In case something went wrong with the config you can re-install without wiping using the Installer of course, but what you could do to get some details is (in the running system, ie not the recovery):
setprop persist.vendor.radio.adb_log_on 1 sudo reboot
And after the device is back up:
sudo env LD_LIBRARY_PATH=/vendor/lib64:/system/lib64 /system/bin/logcat -b all
It hopefully shows what the error in your case is, else you would have to figure out a way to debug on your own.
Btw, does your device report itself as bonito or sargo in the recovery adb shell and in system-settings?
Here is the output from those commands, I tried this a couple times and there was ALOT of text, so I only copied some of the bottom after sending a few consecutive texts to myself
-
So I was playing around with this again this morning and I found that if I toggle airplane mode, I can send and receive sms as normal for about 30 seconds maybe.... after that it quits until I toggle airplane mode again which gives me another 30 sec of working sms
-
@dieharddan I'm starting to assume it is premature powersaving at fault here, I've changed the ril_subscription.conf again for other reasons, including device state management. Will send you the new one to change manually again soon.
Edit: check the config here, especially deviceStateTracking and the last two lines: https://termbin.com/k3gb
-
My ril_subscription.conf says:
#deviceStateTracking=auto
and I do not have the last 2 lines that you haveI tried to copy the new file over with the file manager to test but don't have write permission on the ofono folder
-
@dieharddan What could work is the following:
- Reboot into recovery
- run:
adb shell mount /system_root adb shell mount /system_root/var/lib/lxc/android/android-rootfs.img /tmp adb shell rm /tmp/system/halium/etc/ofono/ril_subscription.conf adb shell umount /tmp adb shell reboot
In the booted system you can then remount read-write and replace the preset:
wget -O ril_subscription.conf https://termbin.com/k3gb adb push ril_subscription.conf /home/phablet/ril_subscription.conf adb shell
In the shell enter:
sudo mount -o remount,rw / sudo mv ril_subscription.conf /etc/ofono/ril_subscription.conf
After that: reboot.
This will be overwritten by updates until confirmed it fixes your issue, then I will merge it. It seems to provide much more stable connectivity on sargo with my provider.
-
@fredldotme Can you elaberate on the "remount read-write and replace the preset:"
I entered the "wget -O ril_subscription.conf https://termbin.com/k3gb" on the phone terminal which worked, but not the
adb push ril_subscription.conf /home/phablet/ril_subscription.conf -
nevermind i got it to copy over
-
@fredldotme Doesn't seem to have made any difference, I still have to toggle airplane mode to get sms to work
-
@dieharddan I can only suggest experimenting with the config or, if that doesn't fix it, adding fallback behavior to ofono in case receiving SMS fails.
-
@fredldotme Ok, let me know if you come up with any other ideas; I will pllay around with that file but not being any kind of developer, I probably won't be able to accomplish much lol
-
@dieharddan What you might also want to try is the two properties ro.ril.power_collapse & ro.ril.disable.power.collapse, these might change the behavior of the power savings mode.
- Reboot into recovery
- Connect phone to PC
- Open an adb shell with
adb shell
- Enter the following commands:
mount /system_root mount /system_root/var/lib/lxc/android/android-rootfs.img /tmp busybox vi /tmp/system/etc/init/on-post-fs.rc
- In vi enter edit mode by pressing 'i' on your keyboard once
- Paste the following content at the end:
on init setprop ro.ril.power_collapse 0 setprop ro.ril.disable.power.collapse 1
- Save and exit by pressing ESC + entering
:wq
- Run
umount /tmp
- Reboot
-
@fredldotme No change Is there something I can capture via log while i toggle airplane mode and send texts
-
@dieharddan
Based on what you describe I think that some process or daemon crashes after some time.
When switching to flight mode you probably kill clean this faulty code.
And when activating the modem again it works... until it crashes again.I cannot help debugging that because I know nothing about it. But best bet is you can find errors in some log.
Best of luck
-
I can't seem to get the os working or to boot on my pixel 3a. The ubports installer says sargo isn't supported