BQ M10 FHD bricked upon UBport install?

Freebobjohn

@marathon2422 said in BQ M10 FHD bricked upon UBport install?:

I just wasted 1\2 a day trying to change my m10fhd from android back to Ubuntu touch,and then to ubports,the way you are trying
Get the hard reset tool from BQ and use that I can give you my serial no, to get a download of Ubuntu touch.
Put the flash tool into firmware upgrade mode,with your m10 connected and turned on in any way it will. Then with your PC sound turned up,click the big Download button,then get your m10 to change modes IE.on from off,or recovery to bootloader,and listen to the PC,and watch the bottom of the flash toolscreen,it take a windows puter and authorising the drivers,,start with drivers ADB folder,then Drivers hard reset,then,open the flash tool, I am on eastern time,in TN.USA, if I can help,or video it and send it

Thanks a lot for your answer, indeed my serial number cannot give me access to the official ubuntu (and BQ refuse to give me access to it, I had already asked a long time ago) it would be awesome if you could send me yours via personal message
Why do you actually think ubports cannot be flashed directly?

Freebobjohn

@dbosley
By softbricked do you mean you had the same problem as the one I have? could you still access your recovery? (I guess so if you could access the fastboot mode)
My worry is that these tools use adb or fastboot under the hood, i'll give spflash tool a try now, even just to get android back on the tablet

Marathon2422

@dbosley Check how much memory is used up by the os, (4gb) ish

tupp

@Freebobjohn
I am a complete Ubports newbie, but I was in a similar sounding situation yesterday, after I interrupted the installation process on my Nexus 5. I was stuck on a screen with a Google logo with an icon of a small, open lock. I didn't see any "orange state" nor "trusted" nor "rebooting messages."

I was able to get the Nexus 5 back into the fastboot screen by running "fastboot oem unlock" in a terminal on my Antix Linux PC while the Nexus 5 was connected to it.

As I recall, I was root when I ran that command, while my Nexus 5 was turned on, displaying the stuck Google screen.

You can also try this method with your BQ M10 FHD turned off. After entering the fastboot command in the terminal, a fastboot message should appear saying, "< waiting for any device >." Then, try to press (and hold?) the various possible button combinations to get it into fastboot mode.

I tried MDT with a Lubuntu liveUSB, but I was unable to get it to work. Ubports-installer worked for me. If you use ubports-installer, make sure not to touch any of the options when "Ubports Recovery" screen appears -- it is counter intuitive, but that screen probably means that the installation is proceeding.

dbosley

FreeJohn,
No, I was able to get to the screen with the Fastboot option using the volume up/power button option. it was there that I had difficulty. When I booted with just the power button, I got a screen similar to your first picture with 'ubuntu' on it.

dbosley

@marathon2422 Ubuntu uses 8.4 GB on my M10. I have noticed a long boot time on it compared to the Cannonical load. Also, in case I was not clear, this is an M10 Ubuntu Edition vice Android.

Marathon2422

@dbosley looks like you could flash twrp,wipe it and reinstall ubports to get back about 4 gb

Marathon2422

@dbosley the boot time is fixed about devel r41 or 42, it should come together n the next few days when OTA 3. Is released ( you may need to keep checking,to get it)

dbosley

Thank you. I'll try after some research. (I'm old and a noob.)

dbosley

Marathon2422, I find Twrp for an Aquaris M10 FHD (FreezerFHD) but not for an Aquaris M10 Ubuntu Edition (Meizu). Am I missing something or should the FHD version work here as well? -Thanks in advance. Dave

Marathon2422

@dbosley No help yet,I am working away from home for a few hours
I have been using. TWRP 3.0.2.

getdroidtips.com shows using. TWRP 3.1.1

dbosley

@marathon2422 Thanks. I’ll try it.

Emmelyne

@freebobjohn I have exactly the same issue with my BQ M10 FHD!
Did you find a way to install UBports till december? Thanks, Emmelyne

abernator

@emmelyne said in BQ M10 FHD bricked upon UBport install?:

@freebobjohn I have exactly the same issue with my BQ M10 FHD!
Did you find a way to install UBports till december? Thanks, Emmelyne

Use bq flash tool to install old UT and when that is flashed succesfully then go for UB installer.

Marathon2422

@abernator. a small tip,plug up to your PC and have the sound on,when going from the orange state to fastboot,on button and vol up,don't release the vol up,wait for a vibration,then release the on button,and wait for the fastboot screen. It may take a couple of tries,the first attempt may not do anything,( of course you have plenty of battery,even though you are cnnected to the PC ?).

Skla

Hello,
At the first time,
sorry for my english
So i have the same probleme for reinstalation Ubuntn upon BQM10 FHD. J've arrived succesefuly
I arrived successfully to install in proceeding by this steps:
My BQ is connected upon my computer
My BQ is shoot down
I boot it in recovery mode in pushing OFF/ON and Volume up in the same time
So BQ is in recovery mode
I starte UBports installer and the installation go normaly.
I have a logo of ubuntu in the screen and after 5 minutes of silence... I boot in the word of linux.
Et voila !

Lakotaubp

@skla Welcome aboard have a look here for more info and usfull stuff
https://ubports.com/telegram-welcome
and enjoy UBports Ubuntu Touch