My MI A2 is no longer recognised by my computer..
-
Hello, my MI A2 no longer goes up on my computer desktop, it is no longer recognised, could someone give me the identifier of the MI A2 in order to force its identification by the ADB commands?
-
@voltcab
Did you try multiple usb cables/slots ? -
@keneda
Hello and thank you for your answer, yes, I have tested many cables and pc's under linux and w10 but they don't recognize the phone... I had the same problem with an Opo and with this method (https://docs.ubports.com/fr/latest/userguide/advanceduse/adb.html) my pc managed to display it and I was able to recover my files... I would like to try the same process with an MI A2 but I don't know where to find its identifier. I will have to find out why all my UT phones have the same problem... -
@voltcab
Just to be clearer, one last question.Your phone is no longer recognized in adb only or also in MTP when used like a usb storage ?
-
@keneda
It no longer goes up on the desktop and is no longer recognised at all... -
Hi @voltcab,
For more help from the community, the following questions should be answered:
Has anything changed on the computer side?- new computer, and which operating system.
- old computer, but with upgrade of the operating system, and/or other operating system, and also here which operating system?
Greetings
Mario -
@mario-ch
Hi,
I will try to be as precise as possible...
I have several phones under UT, two MI A2 and a Oneplus one, on these devices, I encounter the same problem of recognition. At the beginning everything is ok they work normally and after a few months they don't connect to the PC anymore... I tried on several computers under Ubuntu 22.04 and windows 10 with several cables including new ones but without success. While searching on the internet I came across this topic (https://docs.ubports.com/en/latest/userguide/advanceduse/adb.html) which used the Oneplus One as an example and the Opo was finally recognized by the PC running Ubuntu 22.04, so I was able to save my files. For the Mi A2 I did not find the ID as indicated in the topic Shell access via ADB, so I can not test this solution. Maybe there are other ways? Thanks for your feedbacks... -
@voltcab I install Android Studio on my Windows (11) and Ubuntu (22.04) machines. I update it when required and all my devices connect without issue on adb.
-
Hi @voltcab,
Well, first of all, I don't have one of the phones you used, so I can't reproduce it.
Secondly, in the normal case (when no one is fiddling with it) nothing should change on its own.After connecting the phone to the computer, you have to enter the pin/password on the phone.
So it looks like we have many many possibilities where something is working wrong.
ADB (Android Debug Bridge) is a software interface to manage Android devices from the computer. The most important thing is that there are different software and they can get in each other's way if you install both/more on the same computer. For example, the Ubuntu in-house and/or "Android SDK suite" (or others).
See also the following links:
https://manpages.ubuntu.com/manpages/jammy/man1/adb.1.html
or in German (you have to translate it yourself):
https://wiki.ubuntuusers.de/adb/And (no guarantee, because here I am not sure) the phone should be enabled as follows:
In the developer options, enable ADB debugging and OEM unlocking.In addition, forum members in possession of a phone type like you have would be more helpful, even if they only share or negate your problems.
Greetings
MarioTranslated with www.DeepL.com/Translator (free version)
-
Forgot to mention the reason I install Android Studio is I get the latest fastboot and ADB drivers that has so far covered all the devices I have put UT on.
-
@voltcab Easy, connect the phone to the usb on the back of the pc, magic... 🇪🇦
-
@stropbu not sure that kind of answer is of any help...
-
@keneda I, if I am sure that it works, it is more, more than once I have verified it, perhaps it is the length of the internal USB cable to the front part, it reduces the voltage and response time to the round trip data, as well as the frequency, that added to the external cable of poor quality = failure. I insist, rear ports of Pc Tower, not portable PC. 🇪🇦
-
@stropbu
So the advice would be to try a different USB port or to check the USB cable.
And also maybe they have a hardware issue with their phone...What @Keneda tried to explain is that there is already some discussion in this thread and your comment didn't add anything of value until your second, more detailed, comment.
Your first message can be understood as "duh you just have to plug it in..." also what works for you doesn't mean it will work for other, there are tons of parameters to take into account, hardware on both side, cable, power grid of the country/city, OS of the computer, ...
-
Hi! Thanks for the leads but unfortunately I still don't have a positive result... I'm using a laptop at the moment, I'll test the connection directly on a tower card but on a laptop I think the connection is direct too... One detail, I had left the developer mode open, I don't know if this can have an impact on the phone settings when using it...
-
@voltcab
It is frequently advised to use USB2 ports instead of USB3.
But your issue is very weird there is no reason it won't work anymore after some time... -
Given the number of tests on different computers I think I tested USB2 ports but I'll check anyway... I'm going back to the fact that I had the same problem with an Opo and that adding the hardware ID to the ADB commands seems to have unblocked the situation... Do you know where I can find the MI A2 ID?
-
Do you think that using the phone with the developer mode on can change the phone settings ?
-
@voltcab You can leave Dev mode on. I guess you have tried completly removeing adb and drivers and reinstalling? You might have to regrant permission for adb though. Maybe even swop update channels to see if that has an effect. Or even rerun through the installer without the wipe option.
Only other thing is the usb port on the phone clean. I once had a bit of dirt stuck in which stopped a proper conection. Tend to thing if it suddenlt stops and nothing changed start with cables and ports, then the old adb devices in a terminal. Also think you have probably done all that.
-
Ok, I'm dropping the developer mode story... I found a laptop with USB2 plugs, contact cleaner and new cables... All I have to do is update it and... I cross the fingers !
