VPN

jarop

arubislander

@jarop In that case if you downloaded an .ovpn file from Proton VPN, you should be able to import it by opening the terminal app and typing

nmcli connection import type openvpn file "<path/to/file.ovpn>"

where <path/to/file.opvn> should be replaced with the full path to the ovpn file you downloaded.

jarop

@arubislander Thank you very much for the import suggestion. I had no idea such option exists :).
I tried it and first - it didn't connect because of no password saved.
I did the password-flags=0 + [vpn-secrets] config change to store password (btw do you know how to make system remember password without need to do this change?) but then connection takes long time and ends with a timeout.
I have waydroid with protonvpn app on the same device and it can open vpn from there without problems so for sure it is not real issue with host being unreachable.

Did you have similar problems with connection?

arubislander

@jarop I don't use Proton VPN.. I recently helped another user connect to their VPN provider, but I think they were using NordVPN.

arubislander

@jarop said in VPN:

I did the password-flags=0 + [vpn-secrets] config change to store password (btw do you know how to make system remember password without need to do this change?) but then connection takes long time and ends with a timeout.

I am not familiar with that change. Was it not sufficient to open the configuration in the VPN settings after it was imported, and only adding the necessary credentials?

The tutorial you linked to is very old, I am not sure all the steps are still necessary.

jarop

@arubislander I have no idea why openvpn connection didn't work for me. But I have used the instruction you suggested to import wireguard configuration and it did work perfectly.
That is all I needed. Thank you for your help!!!

arubislander

@jarop Wireguard works on Focal? that is great news. What command did you use exactly to get it to work?

naizena

@jarop
I use protonvpn on focal.

It works

naizena

@jarop Take a look to https://forums.ubports.com/post/32296
Files created from the OVPN must either be created on the terminal itself or transferred from the computer. But not sent, for example, by email, because they wouldn't work.
Good luck.

jarop

@arubislander I have used
nmcli connection import type wireguard file "<path/to/file.ovpn>" and it did create connection. I have some difficulties with managing routing after connections are reset but I'm not stuck and this is work in progress. This isn't visible in GUI, only in terminal

jarop

@arubislander I have no idea why, on my device it doesn't work. I follow tutorial, followed import command and result stays as it was. Do you know why password to vpn keeps disappearing maybe?

arubislander

@jarop said in VPN:

Do you know why password to vpn keeps disappearing maybe?

I am afraid not. It sounds like the bug some people have experienced where the WiFi password doesn't stick. That one was due to missing MAC address. But I cannot begin to guess what might be causing your issue.
Maybe the steps in the tutorial you followed messed something up, since they are for an older version of the OS.

jarop

@arubislander Current status is connectoins via wireguard are working for me but DNS does not. I have no idea how to make it work. Trying to connect by ip address works.

arubislander

@jarop As wireguard is not a 'traditional' VPN, but more of a pair-to-pair protocol, it probably requires some extra network routing rules to get everything working. Unfortunately I haven't bitten that bullet yet myself to be able to offer much help there.

jarop

@arubislander Your suggestions were very helpful. At least I can connect somehow to vpn. Thank you!

domubpkm

Seems impossible for me to make proton vpn work on the Volla focal (tested only on OTA-4) by installing a conf through the system parameters. Does this work for anyone? Worked well on Volla Xenial through vpn-editor.

Edit : i noticed that some TLS settings doen't seem saved and i opened https://gitlab.com/ubports/ubuntu-touch/-/issues/2184

domubpkm

@naizena Hello. Can you confirm if proton vpn works or not with OTA-4 for you ? Thanks.

naizena

@domubpkm Yes, it works for me if I'm conected to wifi.
It doesn't work on data connection (It looks like it's connected because the connection indicator turns green and you don't get an error message, but it doesn't connect to the internet...)
But no problem on wifi connection.
Volla X. Focal 20.04 OTA-4. Protonvpn.

domubpkm

@naizena Yes, i confirm vpn works with wifi on OTA-4 too for me. Thanks for that. But before OTA-4, did it work with cellular data on focal ? Because, maybe i'm mistaken but i don't see in your posts that you said that it worked only with wifi.

naizena

@domubpkm It doesn't work with cellular data since Focal update (it worked on Xenial). I thought it would be a problem with my phone company (I'm newbie)... but is not. I tested on an Android device and it works with the data connection. I posted this issue on 26 april 2023.